PROVN OF 02x TOILET BLOCK FOR PALLIATIVE CARE CENTRE NEAR BLDG NO. P-18 OF CH(CC) IN THE AREA OF AGE E/M (HOSP) UNDER GE E/M LUCKNOW

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

Ditto item No. 2 but exceeding 1.5m but not exceeding 3 m in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips complete all as specified and directed.

Ditto, item No. 7 but 6 mm to 8mm dia

Ditto, item No. 7 but 5 to 10mm dia as in stirrups

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in foundation, plinth beam etc complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in roof slab, shelves, balcony etc complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in beams, cantilevers, lintel over 1.5m span etc complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in chajjas etc complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in columns, pillars, piers etc complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M & L for Brickwork with sub class ‘B’ bricks, old size brick, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L for rendering 10 mm thick on fair faces of brick work/ concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 finished fair and even complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces as in cement mortar 1:3 finished fair and even complete all as specified and directed.

M&L for rendering 15 mm thick in two layering cement mortar 1:4 mix with water proofing compound not less than 3% by weight of cement or as per manufacturer instructions on brick work/ concrete on fair surfaces surfaces complete all as specified and directed. (Note : Water proofing compund can be measured and paid separately)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth on wall/ceiling surfaces complete all as specified and directed.

M&L applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification with and including two or more coats on new work over wall/ceiling surfaces complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for formwork to soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick [Horizontal or sloping] for rough finished faces complete all as specified and directed.

M&L for formwork to sides of pillars, posts, piers and columns (polygonal/ circular) for rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides & soffits floor or roof beam for rough finished surfaces etc complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc rough finished surfaces complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas & similar items for rough finished surfaces etc complete all as specified and directed.

M&L for broken bricks for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nexc 15 cm thick watered and rammed to true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggeregate) as in sub base of floor complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40 mm graded stone agrregate) as in sub base floor etc, complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C- 2 (using 40 mm graded stone aggregate) as in floor/hardstanding finished even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as plinth protection and the like with and including joint filling complete all as specified and directed

S&F GI tubes 15 mm bore "medium grade" with and including all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F GI tubes 20 mm bore "medium grade" with and including all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 300 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L 15mm thick screed plaster on RCC slab in CM 1:4 using water proofing compound @ 3% by weight of cement complete all as specified and directed.

Supply only of liquid water proofing compound conforming to IS specification complete all as specified and directed.

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed

M&L for water proofing treatment on roof surfaces in the following manner:- ' (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 litr/sqm ' (b) Supply & laying 3mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10cm & 15cm end lap weinghing not less than 3 kg/sqm with and including two coats of aluminium paint on top surface of roof complete all as specified and directed.

M&L applying one coat of aluminium paints over new or previously untreated surface of any description, over 10cm in width or girth, not otherwise described including preparation of new surface complete all as specified and as directed.

M&L Rotational moulded polyethylene water storage tank 500 litrs capacity (three layered) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. complete all as specified and directed.

S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe complete all as specified and directed.

S & F 20mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed complete all as specified and directed.

S&F vitreous china Europeon Water Closet (one piece cascade set WC) of specified make with flushing cistern & white seat cover complete all as specified & directed. Make- Jaquar / Parryware /Cera

S&F for chromium plated cast copper alloy angle cock (two way) high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F for health faucet, chromium plated rising spray with wall brackets with 1.5m long metallic flexible tube with 15 mm dia fixed complete all as specified and as directed.

S&F for Automatic Soap dispensor complete all as specified and as directed.

S&F white Toilet paper holder of stainless steel (specified make) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed.

S & F stop cock one way (Angle valve) 15mm dia chromium plated cast copper alloy screw down pipe pressure with crutch or butterfly handle scrwed both ends for iron pipe or union complete all as specified and directed.

M & L for oval/rectangular shape under counter wash hand basin on granite platform of size not less than 490mm x 380mmx175 mm with complete necessary fixing arrangements complete all as specified and directed. Make-Jaguar/Cera/ Parryware (Note : Granite slab will be measured and paid seperately)

S & F 15mm dia pillar taps fancy type cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified and directed.

S & F 15mm dia Brass chromium plated cast copper alloy mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F 100 mm dia grating doom of PTMT (min weight 20 gm each) complete all as specified and directed.

S&F looking mirror 600x450 mm consisting of 4 mm thick glass mounted on 4 mm thick plywood and providing decorative type wooden beading with varnish finish complete all as specified and directed. (Make of glass : Modi float / Saint globin / Triveni float glass

S & F chromium plated soap tray fixed with rawl plugs complete all as specified and directed.

S& F for chromium plated cast copper alloy tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S& F Brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F bib taps for 15 mm bore pipe cast copper alloy chromium plated fancy type with crutch or butterfly handle,screwed down, screwed for iron pipe and fixed complete all as specified and directed.

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors/fix to wall complete all as specified and directed.

S &F 75mm bore (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors/fix to wall complete all as specified and directed.

M&L (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed.

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S &F 75 mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl

S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F in PVC (SWR) 125/110 mm gully trap with grating including jointing with solvent cement complete all as specified and directed.

M&L for 40mm thick DPC using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) mixed with Liquid water proofing compound minumum 3% or as per manufacturer's instruction with and including necessary formwork complete all as specified and directed.

M&L PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in coping, shelves, parapet etc including necessary form work complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over red oxide primer coating incl preparation of newly steel surfaces of any description, not otherwise described, over 10cm width or girth etc complete all as specified and directed.

M & L for 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

M & L for 40mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S & F for powder coated aluminium extruded sections thickness not less than 2 mm (conforming to IS) (minimum thickness of powder coating 50 micron) three track sliding window shutter with frames comprising series-C (20mm), duly fitted with neoprene beading, glazing clipss, locking devices, heat absorbing glass 4.8mm thickness (in 2 shutters) and with SS wire cloth of 0.46mm nominal dia of wire and average width of aperature 1.4mm (in one shutter) complete all as specified and directed.

S &F 3mm thick aluminium section composite panel with powder coated aluminium frame work including clip and neosprene rubber beading with complete aluminium iron mongery in door complete all as specified and directed.

M&L for powder coated aluminium ventilator fixed with refletive type glass, aluminium section (thickness not less than 2mmthick) with and including necessary joining cleats, glazing clips rubber neospeprene at bottom panel and top panel with wire cloth of 0.46mm nominal dia of wire and average with of aperature 1.4mm complete all as specified and directed.

M& L Granite (of any type) tiles 20mm(+2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S & F for chromium plated cast copper alloy long body mounting type pillar tap,capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F for Chromium plated cast copper alloy auto closing urinal flush valve (Make - Jaquar cat No: PRS-CHR-077/Cera model No F8010103/Parryware Cat No T3302A1 fixed in 15mm bore pipe complete all as specified and directed.

S & F for Large standard urinal of make- Hindware (cat ID: 60002/Cera Cat No S4020112/Parryware Cat No 173189626 (Model Name Aquaseal N)) complete all as specified and directed.

M & L for Harrison rails, mild steel, chromium plated cast copper alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.

S & F for Sheet glass, 4.8mm thick ordinary quality frosted on one side and glazing fixed in wall with SS screw of any shape and size exc 0.5 sq. m in each complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.), manhole covers, drain covers, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles including necessary form work (reinforcement measured and paid seperately) complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

S& F for HDPE Double wall corrugated (DWC) pipes Class SN-8, 200 mm dia and including coupler and rubber sealing ring complete conforming to IS-16098 and testing as per EN 13476 standards complete all as specified and directed.

M&L for Plain cement concrete, 1:3:6, type C2( using 40 mm graded stone aggegate) as in bed for 200 mm bore pipes including forming cradles complete all as specified and directed

M&L for Plain cement concrete, 1:3:6, type C2,( using 40mm graded stone aggregate) as in bed for 200 mm bore HDPE Double corrugated pipes (DWC) including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed. ( Note : to be provided for encasing pipe for 450 mm length at every 2.0 Mtr centre to centre length of pipe)

M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M&L construction of soakage well (3.0 M dia X 6.0 M effective depth) including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring with RCC slab of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25 including removal of excess soil and site clearance complete as per TD Drawing No: CELZ/TD/576 sheet 1/2 & 2/2 and specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water proofing compound (WPC measured and paid separately) complete all as specified ) top surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed

Preparation of newly plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with with two coats of cement base paint over a coat of cement paint primer (before application of cement base paint), complete all as specified and directed

M&L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed

M&L 100mm thick PCC (1:2:4) type B-1 using 20 mm graded aggregate as in flooring finished even and smooth without using of extra cement laying in alternate bay complete all as specified and directed

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compund Grade 'A' complete all as specified and directed

M&L stain free double charged tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding (Note : Screed bed will not be measured and paid separately) complete all as specified and directed

S&F steel work in tubular trusses/posts including special washers etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with and including oil bound distemper two coats complete all as specified and directed

M&L point wiring for one light/fan point controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits pipe not less than 20 mm dia and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and directed

Ditto all as above item No - 107 hereinbefore but one socket outlet point on same baord

M&L point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings not less than 20 mm dia including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly complete all as specified and directed

S&F Polycarbonate switch piano flush type, SP,5/6 Amps, complete all as specified and directed

S&F Polycarbonate switch piano flush type, SP, 16/20 Amps, one way complete all as specified and directed

S&F Polycarbonate socket out let 2 in 1 socket 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed

S&F Polycarbonate socket out let 6 pin, 20 Amps ISI Marked 20 Amps 240 Volts flush type complete all as specified and directed

M&L Ceiling rose, Pilot 3 Plate ceiling rose 6A,complete all as specified and directed

S&F Epoxy powder coated distribution box SPN 8 way, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed

S&F MCBs SP,06 to 32 Amps, 240 Volts and to be housed in DBs catered hereinafter with and including suitable size of lugs complete all as specified and directed

S&F MCBs SPN,32 to 40 Amps, 240 Volts and to be housed in DBs catered hereinafter with and including suitable size of lugs complete all as specified and directed

M&L for service mains wire of size 10x2 , aluminum conductor, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings of suitable size complete all as specified (Note-Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered)

Supply and fixing Flexible Copper cable three core 1.5 sqmm suitable for connection of light fittings/ FTL/Exhaust fan fittings of any type complete all as specified and directed

S & F Lamp holderbattern / anguler type , PVC/poly-carbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed

Supply & fixing Metal Body exhaust fan 450 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed

Supply and fixing LED battern with LED Tube light Rod 18 watt, 4 feet retro type complete all as specified and directed

S&F and installation testing and commissioning of storage type water heater 25 ltrs capacity , 5 Star rated , vertical mounting type complete made out of CRCA outer body, copper storage tank, heating element,thermostat,thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable complete all as specified and directed

Supply, installation testing and commissioning of electric operated Hand dryer single phase automatic sensor mode type incl making necessary electrical connections with suitable size copper multistranded cable complete all as specified and directed

Supply, installation mirror light 18 watt flat type complete all as specified and directed

m/s raghubar dayal

Spectrum Enterprises