REPAIRS TO DRAIN FOOTPATH FENCING AND GATES FOR ZONE A AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above GL)

Taking down cement or cement lime plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc.

Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing)and removing, rubbish off the premises.

Taking up or down steel tubing and connections including cleaning for re-fixing or removal to store 15mm dia bore of pipe.

All as per item No 4 above but 20mm dia bore of pipe.

All as per item No 4 above but 25mm dia bore of pipe.

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n. exc 1.5 Sqm each all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5sqm but n. exc. 4.0 sqm each all as specified and directed.

S&F 500 ltrs capacity rotatonal moulded polyethylene water storage tanks Triple layer in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including S&F of ball brass valve high pressure of 20mm dia with inlet & outlet coneections etc complete. and incl taking down water storage tanks of 500 Ltr capaciaty.

Taking down water storage tanks of 1000 Ltr capaciaty and S&F 1000 ltrs capacity rotatonal moulded polyethylene water storage tanks Triple layer in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including S&F of ball brass valve high pressure of 25mm dia with inlet & outlet coneections etc complete.

M&L for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection / paving.

M&L for rendering 10mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even & smooth without using extra cement complete all as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to finished even and smooth .Note-WPC paid seprately.

M&L for rendering 5mm thick in cement mortar 1: 3 on soffit of roof ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over primer.

M&L for preparation of newly plastered and applying two coats of distemper oil emulsion over chalk whiting primer.

M & L for preparing newly plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and directed.

Supply only integral water proofing compound

M&L glazed ceramic coloured / designer tiles of size 350 x 250mm x (6to 7mm )/450mmx350mmx(6 to7mm)/450mmx300mmx(6 to 7mm) thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including 15 mm thick screed bed in CM 1:6 complete all as directed by Engineer-in-charge.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4.complete all as directed by Engineer-in-charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforsed with M\S squre tube supplying and fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing for item No 879 in SSR part II 2004

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and directed..

S&F steel tubes medium grade Galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 15mm dia.

All as in item No 28 above, but 20mm.dia

All as in item No 28 above, but 25mm.dia

M&L for Preparing old plastered surfaces of walls by brooming down and applying one coat of oil bound distemper white or tinted all as specified.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over wall care putty.

M&L for Preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint .

M&L for Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint.

M&L preparing old plastered surfaces of walls by brooming down and applying one coat of cement base paint.

S & F in repairs vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap etc.

S&F in repair vitreous china water closet, Pedestal type, white, including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc.

S & F in repairs PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe, etc complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 450x300mm , excluding taps, waste chain and plug and porcelain stopper but including brackets

S&F Vitreous China Urinal, Half stall type, white (including, flush pipe and waste pipe),fixed in repairs.

S&F in repair sink made of stainless steel 1mm thick with plug washers & wastes incl bedding in cement mortar, fixing cantilever brackets & connecting union to pipe overall size 495x420mm, bowl size 410x330x160mm .

S&F in repair 15mm ,Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repair 15mm angle cock/stop valve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

S&F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

M & L for PVC connections 15mm size with PTMT nuts of length 300mm

S & F fancy type shower min size 9"x9" with long shower Arm .

M & L for 63 mm diameter PVC (SWR) floor trap plain with grating including jointing with solvent cement.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S & F 110 mm dia PVC (SWR) bends any radius

S & F 110 mm diaPVC (SWR) branch piece, single (single Y) equal or unequal

S & F 110 mm dia PVC (SWR) branch piece, double (double Y), equal or unequal

S & F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S & F 75 mm dia PVC (SWR) bends any radius

S & F 75 mm diaPVC (SWR) branch piece, single (single Y) equal or unequal

M & L for Taking out & cleaning of sludge/mud/silt from manhole/septic tanks/ soakage pit of any capacity by manually or with mechanically device and removing of same beyond MoD premises. Note:- The measurement shall be taken before taking out the sludge/mud/silt from manhole/septic tanks/ soakage pit. All labour and T&P required i.e. manpower/ mechanically device for taking out sludge/mud/silt and arrangement for dispossed off it etc, shall be deemed included in unit rates quated by the contractor and and nothing extra shall be admissible on this account.

Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar and removal unserviceable material ,debris and rubbish to out side of MD land completeall as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

Dismantling unserviceable chain link fencing/wire mesh any type complete.

Dismantling of posts or struts (wood, steel or RCC) any section, including taking out embedded portion from concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and as directed.

Demolition of precast reinforcement cement concrete slab masonry built in cement mortar.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 by using 40 mm graded crushed stone aggregate as in subbase complete all as specified and as directed.

M&L Sand filling under machine pressed precast concrete interlocking paver block all as specified and directed.

M&L Machine pressed of any colour/tint glossy finish for 60mm thick machine pressed precast conctete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 laid over 25mm thick sand cushining.

S&F 10.5mm thick rectified digital floor tiles of size exc.0.06 sqm any square/rectangular shape and size conforming to relevant IS with coloured cement and pigment, laid over and including 15mm thick screed bed in CM1:6 and all as specified and directed.(Make Johnson or equivalent)

M&L 25 mm thick Jodhper stone roof slab,self faced 7.5CM to 10CM thick,25CM to 35CM wide,hoisted and set,jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified & directed.

Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any type of soil,returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and surplus soil to a distance not exceeding 50Mtr making good complete all as specified and as directed.

S&F mild steel angle for post or struts in fencing including cutting top to shape as directed,drilling holes,notching for wire etc;flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting or riviting etc confirming to Fe-290Gde E-165 complete all as specified and as directed.

M & L Flat Fair finished Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified.

M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations,filling and mass concrete including formwork.

Supply only chain link MS galvanised fencing, any size or type(size as approved by GE) complete all as specified and as directed.

Fixing only chain link fencing including line wires,any mesh,size and type to any type of standards,rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Supply only Mild steel round or square bars,in available length Fe-290(Gde-165) for fixing of chain link fencing complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and as directed.

M&L preparation of new or previously untreated steel surface of any description, not exc 10 cm width or girth,when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

M&L Precast cement concrete solid block masonry of 1:3:6 type C-1 by using 20mm graded crushed stone aggregate setting in cement mortar 1:4 complete all as specified and as directed.

Labour only Precast cement concrete solid block masonry of 1:3:6 type C-1 by using 20mm graded crushed stone aggregate setting in cement mortar 1:4 complete all as specified and as directed.

M&l Preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash on wall complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces.

Mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 8mm dia and over as in striups, spacers & binders, cut to length, bend to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 5 mm dia and over as in striups, spacers & binders, cut to length, bend to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L providing precast cement concrete Type B1(20mm graded aggregate(1:2:4) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc and setting in cement mortar 1:4 complete all as specified and directed.

M&L reinforced cement concrete type B1 1:2:4(20mm graded aggregate)for Columns, pillars, piers, posts and struts

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 for portions framed and hung as gates including pintle hings,stops,hand-made sliding bolts,etc.

M&L preparation for new steel surfaces of any description,and applying two coats of synthetic enamel paint over acoat of red oxide,zinc chrome of any description, over 10cm in width or girth,not otherwise described

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

Taking down unserviceable main switch/DB, Teak wood boards etc

Taking down old unserviceable Sub main wiring and making good the disturbed surfaces complete all as specified and as directed.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, including necessary modular metal flush box/pressed steel terminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including making good disturbed surfaces if any with cement mortar 1:3 for fixing switches/sockets/regulators etc. for one light point controlled by one switch.

All as per Item No 96 here in before but for one fan point controlled by one switch.

All as per Item No 96 here in before but for one 3 pin 5 Amps socket outlet point on independent board

All as per Item No 96 here in before but for one 3 pin 5 Amps socket point on the same board with other switches

All as per srl Item No 96 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

All as per srl Item No 96 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket.

M & L switch piano, flush type single pole, one way 5 Amps

M&L switch socket outlet 2in1, 3pin,5A

M&L switch socket combination 2 in 1, 3 pin, 5 Amps and 15 Amps flush type universal

M&L ceiling rose surface bakelite 65x50 mm two to three terminals.

Supply and fix steped type electronic fan regulator flush type, 230 volt, AC complete.

Supply and fixing 06 to 32 A rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and current carrying capacity in the MCB DB complete with connection testing and commissioning.

All as per Item No 102 above but SPN 6 -32 Amps

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of Tripple pole and neytral (TPN) and current carrying capacity 40 to 100 A in the DB complete with connection testing and commissioning.

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 20 A ,240 V complete all as specified and as directed.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 8 way , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amps rated bus bar , 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete including connecting with 3 core flexible copper conductor including taking down the existing ceiling fan and depositing the same in MES store complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed.

Supply and fix in repair LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in repair LED adore lamp 10 W B22/E27 in the existing lamp holders of Make- Finolex/Philips/Bajaj/Wipro including taking down of the fused LED lamp/CFL lamp complete all as specified and as directed by Engr-in Charge

Taking out old U/S rubber reel of Ceiling fan any make/size and supply and fixing heavy duty shackle type rubber reel complete with clamps. nut, bolt with split pin and washers complete all as specified and as directed.

Taking out defective capacitor and supply and fixing capacitor of rating 2.5/3.15 mfd 230 V all as specified and as directed by Engr-in-Charge.

Supply & Fix in repair fan Regulator electronic step type 300 watt 240 volts including dismantling of old unserviceable regulator complete all as specified and as directed.

Supply and fix in repair switch piano, flush type single pole, one way 5 Amps

Supply and fix in repair switch socket outlet 2in1, 3pin,5A

Supply and fix in repair switch socket combination 2 in 1, 3 pin, 5 Amps and 15 Amps flush type universal

S&F in repair PVC Board 30 x 25 x 5 Cm depth medium quality ISI marked complete all as directed. for fixing of switches, sockets and regulators including taking down the old one complete all as specified and as directed.

Devi Engineeing

M/S JOGARAM SUJARAM JASSAI