installation of 100KVA 11 4 KV plinth mounted Kashipur in the District of Rayagada

1-installation of 100 KVA,11/.4 KV plinth mounted S/S =1No 9 Mtr. Long 300 Kg PSC pole

Pressure Channel (100X50X6) mm 2.8 mtr. long 2 nos. (9.2 Kg. / Mtr.) with Galvanizing

Transformer Mounting Channel (100x50X6)mm 2.8 mtr. long 2 nos. (9.2 Kg./Mtr.) with Galvanizing

AB Switch & HG fuse mounting channel (75X40X6) mm 2.8 mtr. long 4 ns. (6.8 Kg. / Mtr.) with Galvanizing

Transformer Belting angle (50X50X6) mm 3.5Mtr. Long 2 nos. (4.5 Kg./Mtr.) with Galvanizing

Angle for mounting LT distribution box (50X50X6)mm(4.5 Kg./Mtr.) with Galvanizing

AB Switch (11 KV,400A,3 pole,50 Hz)

H.G. Fuse(11 KV,400 A,3 Pole)with PI

LA (9KV, 10KA) Station Class

Disc Insulator (T&C) 45KN Polymer

Hardware (T&C) 45 KN

HT Stay Set complete

7/10 SWG GI Stay wire , Grade-2

Stay Insulator

HT Stay Clamp (1.9 Kg / Pair)

40 mm nominal bore G.I. Pipe (medium gauge) Earthing Device with 3 Mtr. Long

GI Flat 25 x 6mm

LT Distribution Box with MCCB Aluminium Busbar of 2 Bay with kit kat fuse for 100 KVA S/S

63 KVA,11/0.4 KV(Al) Transformer,BIS Energy level-II

G.I. Nuts & Bolts of Assorted size

80sqmm AAA conductor for jumpering

1Cx150 mm sq. LT XLPE Cable (Unarmoured)

Aluminium Cable Sockets 150 mm²

G.I. Base Plate (500x500x10mm) for PSC pole (20Kg)

Earthing Coil

6SWG GI wire

Danger Board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

GI Barbed wire (Anti climbing device@3Kg. Per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Sundries

Construction of 11KV OH line with 3p-3w 11KV 3Cx95mm Sq XLPE cable of .100Km(3-span)=0.100Km(Part-I) 9Mtr long PSC Pole

HT Stay Set complete

7/10 SWG GI Stay wire , Grade-2

Stay Insulator

HT Stay Clamp (1.9 Kg / Pair)

Earthing Coil

RCC Base plate

3C x 95 mm² 11KV XLPE Cable(Armoured),A2XFY

Heat shrinkable jointing kit for 3Cx95 mm² 11KV XLPE Cable(outdoor type)

GI Nuts & Bolts of Assorted size

GI Barbed wire (Anti climbing device@3Kg. Per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Danger Board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

6SWG GI wire for Earthing

Sundries (J-Clamp for XLPE Cable)

3-construction of LT line 3-P 6-W with (4x50+1x50+1x16)mmSq AB cable -0.300 Km by using 8mtr long 200 kg PSC pole -9Nos(PART-III) 8 Mtr. Long 200 Kg PSC pole

(4x35+1X35+1x25) mm sq AB - Cable

Pole clamp for I hook

Dead end Clamp

Eye hook for Dead end Clamp

Suspension Clamp with I hook for ABC

LT Stay Set

LTStay Insulator

LT Stay Clamp (1.40 Kg / Pair)

7/12 SWG GI stay wire, Grade 2

Base Plate for support

G.I. Nuts & Bolts of Assorted size

Earthing Device Coil type (G.I.)

8SWG GI Wire

Danger Board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

GI Barbed wire (Anti climbing device@3Kg. Per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Sundries

CIVIL WORK(PART-IV) Stay/Stud concreting in ratio 1:2:4 (0.5x0.5x0.8)mtr .

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.37Cu.mtr for 9Mtr and 8Mtr PSC pole

Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 Cu mtr

Materials for masonary work for earth pit Charcoal ,salt etc for earthing

Brick wall fencing for 25KVA S/s

External lighting System at OPD & IPD Kashipur S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)

Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge.

Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.

S/F of 6 sq.mm 2 Core ( For Street Light)

Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 32mm

S/F of double battery of 150AH with 2KVA Inverter of Make Luminous/Exide/Sfsonic including all accessories and connection as per direction of Engineer-in-charge.