Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Active |
| 2 | Accepted-Technical | Accepted-Technical Active |
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
24 Aug 2026, 12:00 pmClosed
Superintending Engineer PHED circle nagaur
Superintending Engineer PHED circle nagaur
Providing, Laying, Jointing and commissioning of various size HDPE/DI pipes at various WSS under jurisdiction Sub. Div. Merta city and Degana Div. Merta (ARC)
2026_PHCJA_590650_1
Nit No 04/2026-27 SE
Open Tender
Civil Works - Water Works
Percentage
365 days
Executive Engineer PHED Div. Merta
As per TD
2 documents required · 2 mandatory
₹2,000
Executive Engineer
₹2.4 L
Yes
3 Sept 2026
19 Aug 2026
24 Aug 2026
19 Aug 2026
24 Aug 2026
19 Aug 2026
19 Aug 2026 - 22 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. | |||||
| 1.01 | 80 mm | - | RMT | 1,193.22 | - |
| 1.02 | 100 mm | - | RMT | 1,240.68 | - |
| 1.03 | 150 mm | - | RMT | 1,764.41 | - |
| 1.04 | 200 mm | - | RMT | 2,164.41 | - |
| 1.05 | 250 mm | - | RMT | 2,802.54 | - |
| 1.06 | 300 mm | - | RMT | 3,577.12 | - |
| 2Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply up to 110 mm dia. in coil & above 110 mm dia straight length in 6 M. | |||||
| 2.01 | HDPE PE-80 PN-6 | - | - | - | - |
| 2.02 | 75 mm | - | RMT | 183.9 | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.07 MB
Tech04SPPP.pdf
Tender Documents • 1.96 MB
BOQ_1048942.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .