Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-AOC 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L1 | Accepted-AOC being the lowest | |
| 2 | L2₹23.7 L+₹5.4 L (29.2%)Rejected-Finance NO 235 PSK ILLAM SANKARAN NAGAR CHINNAMMAN KOIL STREET AVADI CHENNAI 600 054 | CHENNAI | THIRUVALLUR | TAMIL NADU | 600054 | L2 | Rejected-Finance Not being Lowest Bid | |
| 3 | L3₹24.0 L+₹5.6 L (30.6%)Rejected-Finance 4 1 70 1 ROAD NO 11 SNEHAPURI NACHARAM HYDERABAD 500 076 | HYDERABAD | MEDCHAL MALKAJGIRI | TELANGANA | 500076 | L3 | Rejected-Finance Not being Lowest Bid | |
| 4 | L4₹24.5 L+₹6.1 L (33.3%)Rejected-Finance 63 2ND MAIN ROAD NGO COLONY ADAMBAKKAM CHENNAI 600 088 | CHENNAI | CHENNAI | TAMIL NADU | 600088 | L4 | Rejected-Finance Not being Lowest Bid | |
| 5 | L5₹25.2 L+₹6.8 L (37.3%)Rejected-Finance OLD NO 2C NEW NO 7 1 THANGAVELU VAITHIYAR STREET CORPORATION MIDDLE SCHOOL TRIPLICANE CHENNAI 600005 | CHENNAI | TAMIL NADU | 600005 | L5 | Rejected-Finance Not being Lowest Bid |
| Sl No | Description | Qty | Unit | M/s.Sai Agency L8 | SWIFTTECH ENGINEERS INDIA PVT LIMITED L6 | SIRITEL SYSTEMS PRIVATE LIMITED L3 | PSK Enterprises L2 | EVEREST ENGINEERING WORKS L4 | M/s Jai Ganesh Engineering Solutions L7 | RK ENTERPRISES L1 | NAVEEN ENTERPRIESES L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F Ball valve (Sch 80) for 20 mm bore UPVC pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable ball valve and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 295 ₹5,900 | 400 ₹8,000 | 250 ₹5,000 | 260 ₹5,200 | 193 ₹3,860 Lowest | 550 ₹11,000 | 400 ₹8,000 | 215 ₹4,300 |
| 2.00 | S&F Ball valve (Sch 80) for 25 mm bore UPVC pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable ball valve and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 555 ₹11,100 | 700 ₹14,000 | 350 ₹7,000 | 360 ₹7,200 | 317.9 ₹6,358 Lowest | 650 ₹13,000 | 410 ₹8,200 | 388 ₹7,760 |
| 3.00 | S&F Ball valve (Sch 80) for 40 mm bore UPVC pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable ball valve and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 800 ₹16,000 | 1,200 ₹24,000 | 850 ₹17,000 | 900 ₹18,000 | 637.4 ₹12,748 Lowest | 850 ₹17,000 | 900 ₹18,000 | 830 ₹16,600 |
| 4.00 | S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 800 ₹16,000 | 600 ₹12,000 | 535 ₹10,700 | 450 ₹9,000 | 631 ₹12,620 | 950 ₹19,000 | 400 ₹8,000 Lowest | 485 ₹9,700 |
| 5.00 | S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 800 ₹16,000 | 750 ₹15,000 | 750 ₹15,000 | 530 ₹10,600 | 878 ₹17,560 | 2,300 ₹46,000 | 410 ₹8,200 Lowest | 580 ₹11,600 |
| 6.00 | S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 40mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 1,070 ₹21,400 | 1,500 ₹30,000 | 850 ₹17,000 | 800 ₹16,000 | 1,842 ₹36,840 | 3,200 ₹64,000 | 600 ₹12,000 Lowest | 656 ₹13,120 |
| 7.00 | S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 50mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed. | 20 | Each | 1,248 ₹24,960 | 2,400 ₹48,000 | 850 ₹17,000 | 980 ₹19,600 | 2,720 ₹54,400 | 4,800 ₹96,000 | 900 ₹18,000 | 820 ₹16,400 Lowest |
| 8.00 | Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 80mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. including taking down unserviceable sluice valve and connected fittings and fixtures complete all as specified and directed. | 5 | Each | 8,000 ₹40,000 | 5,400 ₹27,000 | 8,000 ₹40,000 | 7,200 ₹36,000 | 7,061 ₹35,305 | 7,500 ₹37,500 | 5,000 ₹25,000 Lowest | 7,500 ₹37,500 |
| 9.00 | Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 100mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. including taking down unserviceable sluice valve and connected fittings and fixtures complete all as specified and directed. | 2 | Each | 7,500 ₹15,000 Lowest | 8,500 ₹17,000 | 8,000 ₹16,000 | 8,900 ₹17,800 | 9,250 ₹18,500 | 14,500 ₹29,000 | 8,000 ₹16,000 | 9,120 ₹18,240 |
| 10.00 | Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 150mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. including taking down unserviceable sluice valve and connected fittings and fixtures complete all as specified and directed. | 4 | Each | 12,500 ₹50,000 | 13,000 ₹52,000 | 11,000 ₹44,000 Lowest | 12,500 ₹50,000 | 14,474 ₹57,896 | 27,000 ₹1,08,000 | 11,000 ₹44,000 Lowest | 11,200 ₹44,800 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
6 Jan 2026, 6:55 pmClosed
GE Chennai
GE Chennai 600 009
REPAIR MAINT WATER SUPPLY SYSTEM CLEANING OF SUMPS AND OH RESERVOIR SERVICE TANKS AND CONNECTED WORKS UNDER GE CHENNAI
2025_MES_744739_1
8896/E8
Open Tender
Civil Works
Item Rate
120 days
GE Chennai
As per tender
7 documents required · 7 mandatory
₹500
GE Chennai
₹70,000
Yes
26 Feb 2026
16 Dec 2025
13 Jan 2026
16 Dec 2025
6 Jan 2026
30 Dec 2025
S&F Ball valve (Sch 80) for 20 mm bore UPVC pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable ball valve and connected fittings and fixtures complete all as specified and directed.
S&F Ball valve (Sch 80) for 25 mm bore UPVC pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable ball valve and connected fittings and fixtures complete all as specified and directed.
S&F Ball valve (Sch 80) for 40 mm bore UPVC pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable ball valve and connected fittings and fixtures complete all as specified and directed.
S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed.
S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed.
S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 40mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed.
S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 50mm bore iron pipe including all fittings/ fixtures like nipple, union etc. fixed in repairs including taking down unserviceable gate valves and connected fittings and fixtures complete all as specified and directed.
Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 80mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. including taking down unserviceable sluice valve and connected fittings and fixtures complete all as specified and directed.
Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 100mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. including taking down unserviceable sluice valve and connected fittings and fixtures complete all as specified and directed.
Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 150mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. including taking down unserviceable sluice valve and connected fittings and fixtures complete all as specified and directed.
Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil including cutting of grass vegetation around pump house and removing excavated material (soil) and rubbish to out side MD land all as specified and as directed.
Testing of water samples (Raw and Treated ) for physical examination and chemical examination full test from TWAD/ Govt. approved laboratory complete all as specified and as directed.
Cleaning of underground water storage sump of capacity 2,00,000 Ltrs having one compartment by specialized water tank clean process as under and writing the details like 'Cleaned ON ',"sump capacity" with white enameled paint over black painted surface on sump complete all as specified and as directed (a) Dewatering using submersible pump/bailing out of water upto the maximum depth level of Sump/ tank. (b) Cleaning the tank / UG sump bottom, walls and ceiling using high pressure water jet to dislodge the algae calcinations, dirt etc. (c) Disposing the dirt water sludge etc., using specially designed sludge removal pump. (d) Cleaning the tank inside thoroughly by using industrial grade vacuum pump to make the tank inside free from dirt, algae and sludge etc. (e) Treating the inside walls, bottom, ceiling of tank including all nooks and corners by using and spraying anti bacterial agent such as Hydrogen peroxide (bio degradable) for disinfection of tank inside (f) Total disinfection and sterilisation of tank hygienically cleaned and bacteria free and safe for storage of water (g) Distempering the water surface of tanks/sumps using weather proof distemper with two coats complete all as specified and as directed.
All as per item No.13 here in before but underground water storage sump of capacity 1,50,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but underground water storage sump of capacity 1,00,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but underground water storage sump of capacity 75,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but underground water storage sump of capacity 50,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but underground water storage sump of capacity 25,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but underground water storage sump of capacity 20,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but underground flood water storage sump of capacity 75,000 Ltrs complete all as specified and as directed.
All as per item No.13 here in before but semi underground flood water storage sump of capacity 20,000 Ltrs complete all as specified and as directed.
Dewatering shallow well 4 to 6 meter dia and upto 10 meter deep, desilting and disposing off the sand deposits at a distance not exceeding 200m away including cleaning the well thoroughly including removing all vegetation and writing the details like 'Cleaned ON ',"sump capacity" with white enameled paint over black painted surface on well complete all as specified and as directed.
M & L for cleaning of OH reservoirs of size 1,00,000 gallons by bailing out water through washout pipe, cleaning the tank complete after removing the sludge and washing the inner surface of tank with bleaching powder. Note: The rate quoted by the Contractor deemed to be inclusive of the following (a) Provision of Scaffolding (b) Repairs to existing approach ladder (c) Painting of ladder with 2 coats synthetic enemal paint (d) Repairs to aviation obstruction lights (e) Writing of details such as tank capacity, Date of cleaning etc with white enemal paint over the black painted surface. (f) Distembering the water surface of OH tanks/sumps using weather proof distemper with two coats complete all as specified and as directed.
All as per item No.23 here in before but OH reservoir of capacity 50,000 gallons complete all as specified and as directed.
All as per item No.23 here in before but OH reservoir of capacity 5,000 litres complete all as specified and as directed.
Draining out the existing water complete through washout valve or through union socket, cleaning the inner surface of the tank along with tank cover of capacity 500 ltrs/1 hr with suitable cleaning brush to remove dirt, descaling complete and taking out the descaled water from the tank after carefully closing the washout valve and again cleaning the inner surface of the tank with suitable grade of bleaching powder to disinfect the tank complete and bailing out the complete chlorine washed water from the tank complete including cleaning the outer surface of tank with clean water, attending repairs/replacement of defective float valve of different sizes, tank cover etc, printing the tank with details like painted on with date and due on with black paint on white based surface complete all as specified and as directed. Note 1: The item required for replacement viz tank cover, float valves, ball valves etc will be measured and paid under relevant items.
All as per item No.26 here in before but 1000 litres capacity complete all as specified and as directed.
S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank complete all as specified and as directed.
S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank complete all as specified and as directed.
Supply and fix in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed.
Supply and fix in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.
Supply & fix covers for Rotational moulded polyethylene water tank of capacity 1000 ltrs complete all as specified and as directed.
Supply & fix covers for Rotational moulded polyethylene water tank of capacity 500 ltrs complete all as specified and as directed.
M&L for replacement of UG sump cover made out of 3.15 mm thick MS fabrication sheet with base frame of suitable size to the existing size made of 50 X 50 X 6 mm MS angle iron frame fixed in UG sump/ tank and pit cover fixed to frame with hinges including locking arrangement, painting complete with 2 coats synthetic enamel paint and a coat of red oxide primer all as specified and directed
M&L for fabrication of MS ladder of suitable length and MS angle iron size to the existing size for maintenance of UG sump/tanks made out of 50 X 50 X 6 mm and fixed properly to the bottom of UG sump with PCC properly and fixing arrangement at top, painting complete with 2 coats synthetic enemal paint and a coat of red oxide primer all as specified and directed
M&L for steel work for covering of wells as a frame work complete with welding and nut, bolts washers and necessary fabrication work and similar items including taking down the existing unserviceable items and painting new surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down the existing unserviceable Nylon mesh and supply and fix new Nylon mesh heavy grade clamped on vent pipe on UG sump/ Well with MS clamp 20mm x 3mm with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
BOQ_833901.xls
BOQ • 0.32 MB
Tender8896.pdf
Tender Documents • 0.80 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .