PROVN OF HARD STANDING, CHAIN LINK FENCING AND ASSOCIATED WORKS NEAR SATCOM, ADDN/ALTN AND IMPROVEMENT OF CERTAIN OFFR, PROVN OF IRON GRILL/SHUTTER WITH HANDLE AT HQ BLDG AND SPECIAL REPAIR TO FOOTHPATH, KERB STONE AND ROAD FURNITURE AT AF STN GNR

Amount

Surface excavtion n.exc 30 cm deep and averaging 15 cm deep soft and loose soil complete all as specified and directed.

M&L for hardcore using broken stone or boulders not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 100mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring and paving complete all as specified and directed.

M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.

All as per Item No 5 here in before but except tiles.

M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.

All as per Item No 7 here in before but except tiles.

M&L 25mm sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and as directed.

M&L for forming 12mm thick expansion joints 100 mm thick slab filled with preformed bituminious filler and top 30mm primed and sealed with sealing compound grade A complete all as specified and directed.

M&L for forming contraction 30mm deep 10mm wide filled with sealing compound grade A complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone agg) as in foundation of posts and struts complete all as specified and directed.

S&F Mild steel works for posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iorn fillets (for securing wire mesh etc) incl all necessary drilling , bolting or welding / riveting, etc and similar work conforming to Fe-290 Gde -E-165 complete all as specified and directed.

S&F mild steel screw bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut , but length of bolt exc 5 cm and not exc 10 cm long and diameter of neck 10 mm complete all as specified and directed.

Supply only Chain Link MS galvanised fencing any size or type complete all as specified and directed.

S&F 10mm dia MS round bar for fixing of chain link fencing with posts confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

Fixing only Chain Link Fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

M&L for Preparation of new steel surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparation of new steel surfaces n.exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavating over areas, not exc 1.5 m deep and getting out soft and loose soil complete all as specified and directed.

M&L cement concrete Type D2 1 :4 :8 (40mm gtraded aggregate) in foundation filling and mass concrete, complete all as specified and directed.

M&L Reinforced Cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation footing complete all as specified and directed.

Formwork to sides of concrete foundations, footings, in flat surface and rough finished surfaces of concrete complete all as specified and directed.

M&L Reinforced Cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate for column, pillars, piers, posts and struts etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions in square or rectangular surface and rough finished surfaces of concrete complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length bent to shape required, including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clip quality complete all as specified and directed.

M&L 15mm thick cement plaster on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) in CM 1:4 complete all as specified and directed.

M&L preparing new surface of wall and applying two coat of cement based paint over a coat of wall primer complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410-W (Gde.E-250) quality-A complete all as specified and directed.

S&F MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm avaible from distance n. exc. 50 m complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F pre-coated galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 MPA as in roof covering fixed with self topping screw complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and paver block tiles of any description or thickness in floors laid dry and pointed complete all as specified and directed.

M&L Chequred cement concrete tiles 30cm x30cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry , including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for preparation of old painted surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

S & F road safety convex mirror made up of polycarbonate reflective with hood for road turning ,intersection ,curves ,'T' junction et unbreakable & strong,mounted on and body made of ABS /Fiber/Plastic of size 100cm dia fixed over & including 80mm bore MS pipe of 2.4 meter length duly powder coated ,fixed with adjustable clamp,pole fixed in plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) block of size 450x450x450mm deep including necessary ,excavation & earthwork along with taking out of old safety convex mirror complete all as specified and as directed by Engineer-in-charge. Make: Tata/3M/Dark Eye or equivalent as approved by GE. Note: (i) a mild steel base plate of size 250mmx250mmx3mm shall be welded at bottom of pole. (ii) all steel & iron surfaces other than powder coated shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide zinc primer.

S & F in repair Solar delineators made from polycarbonate & toughened aluminium alloy body, 145mm high, 80mm dia solar reflector, 80mm high, comprising of four super bright LEDs giving 360 degree view with solar panel 2.5V, 120mm (approx.), 1.25V rechargeable battery and high intensity retro-reflective band 1" wide for extra visibility, mounted on and including 65mm dia powder coated MS pipe, 750mm long, fitted in and including provision of cement concrete 1:2:4 type B1 cubes 200mm x 200mm x 300mm size, embedded underground, complete all as specified and directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4(150x150x300mm) type B1 complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Dismantling of ceiling board/false ceiling any Size and thickness complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and directed.

All as per item No 56 here in before but on vertical surfaces/skirting.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x350x7mm/ 450x300x7mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repair one piece EWC with UF soft close swat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fitting, of size 360x725x735mm with P trap 300mm complete all as specified and directed. (Make : Jaquar Cat No. SLS-WHT-6851S300UF or Equivalent as approved by GE.)

S&F in repair angular stop cock with wall flange fixed to15mm bore pipe complete all as specified and directed. (Make- Jaquar Cat No. 057PM or Equivalent as approved by GE.)

S&F in repair long body CP bib cock with wall flange fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make- Jaquar Cat No. COP-107PM or Equivalent as approved by GE.)

S&F in repair 15 mm CP Bib cock 2 way with wall flange fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make- Jaquar Cat No. COP-041PM or Equivalent as approved by GE.)

S&F in repair 15 mm CP pillar cock fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make - Jaquar Cat No. KUP-35001PM or Equivalent as approved by GE.)

S&F in repair CP Health Faucet with 8mm dia, 1.20 mtr long flexible tube & wall hook complete all as specified and directed. (Make- Jaquar Cat No. ALD-573 or Equivalent as approved by GE.)

S&F in repair liquid Soap dispenser with metallic bottle complete all as specified and directed. (Make- Jaquar Cat No. ACN-1137N or Equivalent as approved by GE.)

S&F Bottle trap 32mm size with 250mm &190mm long wall connection pipes & wall flange complete all as specified and directed. (Make- Jaquar Cat No. ALD-769L250X190 or Equivalent as approved by GE.)

S&F in repair Round shape thin rim Table top basin with fixing accessories of size 360mm x 360mm x 120mm complete all as specified and directed. (Make : Jaquar Cat part No SLS-WHT-6905 or Equivalent as approved by GE.)

S&F wall mounted automatic hand dryer machine for washroom fixing with nails/screw etc complete all as specified and directed.

S&F in repair toilet roll holder with stainless steel flap complete all as specified and directed. (Make - Jaquar Cat No. ACN-1153S or Equivalent as approved by GE.)

M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

S&F in repair frosted glass ordinary quality 4mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Taking up or down steel tubing pipe and connections 15 mm bore complete all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair stainless steel grating doom 150x150mm complete all as specified and directed.

S&F Pressed steel frames size 125X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L PCC 1:3:6 Type C-0 Filling in P.S. Door Frame complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer- In- Charge.

S&F 100mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 to pressed steel door frame complete all as specified and directed.

S&F 150mm extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 200mm extruded brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F 150 mm floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F in repair door closer aluminium (extruded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Providing and fixing Gypsum Board 605 x 605mmx12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F coloured vertical vanishing blind having minimum 75mm width of strip complete with all its accessories fixed to wall with screws complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F 12mm thick toughened glass for bathroom partition including all accessery i.e. Brackets, hinges, handle, lock etc. complete all as specified and directed by Engr-in-charge.

Taking down carefully copper/ aluminum point wiring of any size and description (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder, regulators, sockets light fittings etc, removing material for taking credit, etc complete all as specified and directed.

Material and labour for point wiring for one light point or one fan point or one bell point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade drawn through concealed PVC conduit and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly with incl factory made GI sheet sunken box ,modular cover plate chrome collar with base frame and making good disturbed surface of walls, floors, etc. complete all as specified and directed.

All as per item No. 98 here-in-before but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on same board complete all as specified and directed.

All as per item No. 98 here-in-before but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on independent board complete all as specified and directed.

All as per item No. 98 here-in-before but point wiring for one 6 pin switch socket outlet combination, 5/15 amps (independent) with using 2.5 sq.mm (nominal area) copper PVC insulated unsheathed stranded copper conductor as continuous earth wire on independent board for one socket outlet 3 pin 15 amps complete all as specified and directed.

Supply and fixing for ceiling rose surface bakelite, three terminals complete all as specified and directed.

S & F for Modular Bell push 10A, 1 module complete all as specified and directed.

Supply & Fixing 10A Modular switch 1 way, 1 module complete all as specified and directed.

Supply & Fixing 20A Modular switch with LED Indicator, 1 module complete all as specified and directed.

Supply & Fixing 10A Modular Socket 3 pin with shutter, 2 module complete all as specified and directed.

Supply & Fixing Modular Socket 10A/20A, 2 in 1 combined with shutter, 2 module complete all as specified and directed.

Supply & Fixing Modular fan regulator 100 W, 5 speed step type, 2 module complete all as specified and directed.

Supply & Fixing Bell Multi Music type complete all as specified and directed.

M & L for in replacement of sub main wiring using two single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 4 Sq.mm of 1100 Volts voltage rating drawn through and including non rigid PVC concealed conduit of size not less than 20mm with standard accessories, along-with one run of FRLS PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sq.mm as earth continuity conductor complete all as specified and directed. Note : Two run of single core FRLS PVC cable with one run of earth conductor and conduit shall be measured as one unit.

S & F in replacement of industrial type sheet metal enclosures with modular a two pin and earth plug and socket 20 Amp, 250 volts with including 16/20 Amp, SP 230 volts complete all as specified and directed.

S & F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in replacement engage light Red & Green colour LED 5 watt fitting 220 volts AC complete all as specified and directed.

Disconnecting & taking out of split AC indoor unit by disconnecting of copper tube and electric cable including collection of refrigerant gas & refixing of indoor with refilling refrigerant gas & testing after connecting all the parts in position complete all as specified and directed.

M & L for factory made SS bracket with screw suitable for split AC indoor unit of any type complete all as specified and directed.

S & F Plywood 12 mm thick , grade BWP, type BB, fixed with screws to wooden timber frame complete all as specified and directed.

JIYA CONSTRUCTION (BID ID -3154518)

ARTI CONSTRUCTION (BID ID -3156529)

NEW TECH PROJECT INDIA (BID ID -3155102)

Shree Builders (BID ID -3156191)

Ramdev and Sons (BID ID -3156313)

Haritwal traders (BID ID -3156616)

Shreeganesh Construction (BID ID -3155037)