Water Supply Scheme Abadi Baba Sawan Singh Nagar Block Rayya District Amritsar PRWSSIP 2a i JJM

Amount

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechanically excavation and Including specials)

90mm o/d pipe of 6 Kgf. / sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI

80mm i/d Sluice Valves flanged

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Size 0.6 m. x 0.6m.

Dismantling of metalled raod and compacting orginal ground below embankment.

Providing proposed water connection to house hold up to wall with providing, laying jointing testing MDPE pipe lines 15 mm i/d with specials 2.00 mtr (Below GL) and ISI Marked G.I. pipe 15 mm i/d GM ferrule (As per IS:1239) B Class approved make2.50 mtr. (Above GL) including cost of special such as tees, bends, sockets, elbow, etc. cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock, 15 mm i/d as per IS: 210 with stainless steel spindle of approved make as per CSR 30.65 (b) complete in all respects. (Connection at Existing pipe line) 10 (Connection at New pipe line) 26

Cost of Replacement of Machinery Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 246 LPM against a head of 59 mtr (reputed make) complete in all respects as per standard Specifications including Cable as per standard Specifications.

Repair of Pump Chamber

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (Grills in windows, Grills in ventilator, R.S. Joint on roof, Ventilator .etc)

White washing 3 coats inside of pump chamber. (Pump Chamber, Cub Board, Outside Window, Door Portion)

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade. (PC Wall outside, Front Window, Pillar Portion above parapet, Sides of Door, Parapet walls plaster Sides, Parapet Walls plaster top)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area (Ventilator, Windows)

Repair of OHSR

Repair of 4" Expansion joint Complete in all respects.

Repair of 3" Expansion joint Complete in all respects.

Development of water works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.

Providing & Fixing D hook complete with MS bolt size 300 mm x18 mm as per standard drawing D-7 & Analysis of Rates A-9 complete in all respects.

Providing & Fixing PCC Fencing Poles With 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects.

Repair of brick masonry corner pillar complete in all respects as per standard Drawing D-3.

Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS standard specifications.

Extra Carriage of Sand (Fine Aggregate)

Extra Carriage of Bajri (Course Agrregate)