Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.1 L
Closing Date
29 Jun 2026, 3:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Carrying out Zone works for period ending 30.06.2027 on Zone No. 07 Officer's colony, Road no- 01 to 07 (Kalibari) at Izzatnagar.
NER-IZN-2026-ZONE-07
NER-IZN-2026-ZONE-07
Open
12 Months
Bareilly, Uttar Pradesh
₹0
₹4.1 L
5 Jun 2026
5 Jun 2026
15 Jun 2026
Item Breakup - C-N.S-Items.
Hire charges of TATA 407 or equivalent for Day local shifting.
Hydraulic Excavator of 1 cum bucket.
Hire and running charges of light crane.
Tractor with trolley. Total 710655.00
Item Breakup - D-N.S-Items.
Artisan (Blacksmith 2nd class, Carpenter 2nd Day class, Mason 2nd class & Painter Etc.).
Helper (Technician)
Mali Total 4664879.50 IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY
Item Breakup - E-N.S-Items.
Portland Cement (OPC-43 Grade).
Vitreous china pedestal type water closet
Oxidized mild steel sliding door bolt 300x16 Each mm.
Oxidized mild steel sliding door bolt 250x16 Each mm.
Oxidized mild steel tower bolt (barrel type) Each 200x10 mm.
Oxidized mild steel tower bolt (barrel type) Each 150x10 mm.
Oxidized mild steel handles 125 mm.
Oxidized mild steel handles 100 mm.
Oxidized mild steel handles 75 mm.
Block board construction flush door with Sqm commercial ply on both faces 30 mm.
Coarse sand (zone III).
Synthetic enamel paint in black or chocolate Litre shade.
Synthetic enamel paint in all shades except Litre black or chocolate shade.
100% Premium acrylic dirt Silicone additives exterior paint.
Structural steel such as tees, angles channels Quintal and R.S. joists.
Mirror of superior make glass 60x45 cm.
Vitreous China pedestal for wash basin.
G.I. Union 15 mm nominal bore.
G.I. Union 20 mm nominal bore.
G.I. Union 25 mm nominal bore.
Polyethylene water storage tank with cover Litre and suitable locking arrangement.
Vitreous China flat back wash basin 550x400 Each mm.
Hydraulic door closer tubular type Aluminum Each section body.
Vitreous China orisha type W.C. pan of size Each 580 mm.
White plastic seat (solid) with lid
12 mm commercial ply.
Unplasticized P.V.C. connection pipe with Each brass union 45 cm long 15 mm bore.
H.P. or L.P. ball valve with polythene floats: Each 15 mm dia.
H.P. or L.P. ball valve with polythene floats: Each 20 mm dia.
H.P. or L.P. ball valve with polythene floats: Each 25 mm.
C.P. brass waste 32 mm.
C.P. brass waste 40 mm each.
C.P. Brass angle valve 15 mm.
C.P. Brass bibcock 15 mm.
C.P. Brass long nose bibcock 15 mm.
C.P. Brass long body bibcock 15 mm.
Stainless steel butt hinges 125x64x1.9 mm 10 Nos. IS: 12817 marked. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY
Stainless steel butt hinges 100x58x1.9 mm 10 Nos. IS: 12817 marked.
Stainless steel butt hinges 75x47x1.8 mm IS: 10 Nos. 12817 marked.
Stainless steel kitchen sink - without drain Each board 610x460 mm bowl depth 200 mm.
15 mm PTMT bib cock.
15 mm PTMT bib cock with flange (fancy).
15 mm PTMT bib cock long body with flange.
PTMT pillar cock.
U-PVC pipes (working pressure 4 kg / cm²) Metre Single socketed pipe 75 mm dia.
U-PVC pipes (working pressure 4 kg / cm²) Metre Single socketed pipe 110 mm dia.
UPVC bend 87.5° 75 mm bend.
UPVC bend 87.5° 110 mm bend.
Semi Rigid PVC waste pipe for sink and wash Each basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings.
Stainless steel telescopic drawer channels
Flexible (coil shaped) PVC waste pipe for sink Each and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings.
Flexible (coil shaped) PVC waste pipe for sink Each and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings.
Flushing Cistern P.V.C. 10 liter capacity (low Each level) (White) (with fittings, accessories and flush pipe)
UV stabilized 2 mm thick plain FRP sheet.
UV stabilized 2 mm thick corrugated FRP Sqm sheet.
Nickel plated M.S. pipe 20 mm dia
Galvanized wire mesh of average width of Sqm aperture 1.4 mm and nominal dia of wire 0.63 mm.
8 mm dia C.P. Brass/ S.S. Jet with flexible Each tube up to 1 meter long with S.S. triangular plate for European type W.C.
18 mm thick block board with commercial ply Sqm veneering on both side.
Turpentine oil.
White cement-based putty.
15 mm dia PTMT stop cock (male thread).
20 mm dia PTMT stop cock.
1.0 mm thick decorative laminated sheet.
Nickel plated M.S. Brackets for curtain rod 20 Each mm
C.P. Brass Centre Hole Basin Mixer With Cast Each Spout Total 1102396.12
Item Breakup - F-N.S-Items.
Providing and fixing PVC false ceiling tiles of Sqm required size in true horizontal/vertical levels suspended on interlocking MS tube grid of section 25mmx25mmx1.2mm. PVC ceiling tiles should have a section size of 6mmx250mm with wall thickness of 0.8mm. Perimeter edge of tiles shall be covered by extruded PVC corner Beeding of size 9mm x 8mm x1 mm. MS tube section grid should be properly secured with walls and anchored to roof with the help of suitable clamps with complete work.
Brick work with Railway bricks in foundation cum and upto plinth with 1:6 cement mortar (1 cement : 6 Coarse sand)
Providing hand packed dry flat brick flooring, Sqm class designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary) of average thickness 25 mm including ramming sub grade (Flat Brick).
Providing and applying water proofing Sqm treatment to RCC roof slab etc. by application of two coats of cement slurry mixed with water proofing compound (Acrylic based polymer, solid content 30% ± 3, pH >7) in the ratio of 1:2 (1 part of water proofing compound :2 parts of cement by weight), followed by tow coats of single component moisture cured polyurethane based elastomeric water proofing coating conforming to ASTM C-836-89 having tensile strength 3.1 N/mm² . topping layer of 25 mm thick cement concrete 1:2:4 (to be paid separately) to be laid.
Sealing of cracks in roofs by making a V- Metre shaped groove and filling the groove with acrylic-strene based copolymer waterproofing compound.
Supply of WEEDICIDE Glyphosate medicine
Providing and applying Asian Royale play Sqm metalic finish texture paint on interior wall surface including making proper base, one coat of primer of approved quality and finishing coat by two coat of acrylic emulsion paint of approved quality, colour & shade complete in all respect, labour, material, T&P, all taxes, GST etc.as per direction of Engineer incharge at site.
Providing and fixing permanently colour Sqm coated trapezoidal profiled sheet of depth 28- 30mm at 195- 205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume / galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150 gsm zinc aluminium coating AZ-150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester paint coat on exposed surface over a primer coat of 5 microns a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene / EPDM washer on crests of the sheet IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY
Brick work with Railway bricks above plinth cum level and up to floor V level in all shapes and size with 1:6 cement mortar (1 cement: 6 Coarse sand).
Providing & fixing of coloured galvalume plain Metre sheet flashings at ridges / apex junctions of roofing cladding, cover / corner / barge pieces etc. in required shape, colour duly fixed with stitching screws (with EPDM washers etc. as per site requirement) 601mm to 1200 mm width (girth).
Supplying, fixing & installation of wallpaper of Square approved quality, colour & shade complete in Foot all respect, labour, material, T&P, all taxes, GST etc.as per direction of Engineer incharge at site. Total 834442.87
Item Breakup - G-N.S-Items.
Drilling of bore well for specified depth in all Metre types of soil and rock mechanically with all contractor's tools, plants, materials and labour up to 75 meters For (150mm dia).
Providing and lowering 110 mm PVC pipe in Metre boring.
Shrouding of tube well bore by pea gravel of cum Lalkuan size 1.5 mm to 4.7 mm including supply of pea gravel.
Development of Tube Well by using 350 PSI Hour compressor.
Development of Tube Well by OP unit of 3 Hour cusec capacity and testing of tube well for yield.
Taking out old hand pump machine and Each lowering in another new boring with repairing and changing of leather bucket, sheet valve etc. (Exc. The cost of material changed).
Providing and fixing rectangular counter wash Each basin with 15mm dia CP brass pillar tap of MARC, equivalent make of superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/ architect at site.
Providing and fixing Wall hanging W C Italian Each type with concealed cistern with SS bottom, superior quality, (Hind ware, pair ware etc.) including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/architect at site.
Prov & fixing CP Brass Basin hole mixture Each Hindwaare or similar. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY
Prov & fixing CP brass WALL MIXER with Each telephonic shower 15mm dia ISI mark, Superior quqlity heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site
supplying fitting and fixing of 15mm dia C P Each brass pillar tap long body (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site
Supplying fitting and fixing 15mm dia CP Each brass short body bib cock (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site
Supplying fitting and fixing 15mm dia CP Each brass longt body bib copck (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site
Providing and fixing CP brass angle valve Each (ideal orient or equivelent make) complete fitting T & P levies etc.complete as per direction of engineer incharge/architect at site
Supplying and fixing Health faucet jaguar or Each similar make
Supplying and fixing C P brass Over Head Each shower of MARC make or similar
Supplying, Sinking & installation of 40 mm Each hand pump No.6 ordinary hand pump set comprising the following of approved quality complete assembly having depth of 30 M as per IS:9301. Hand pump No.6 with plunger, barrel, handle, head, piston rod, leather bucket, base, valve weight G.I. Screws, bolts & nuts as per IS :1363 /1967, leather seat valve, 40 mm dia C.I. Cutter with steel plug, 40 mm dia G.I. Sockets & 40 mm dia G.I. Pipe medium quality v) Brass strainer mesh type "Dinco" or equivalent made of long slotted medium B class G.I.pipes with 80- mesh brass wire net wrapping around the perforated pipe and jacketed by 26 / 28 SWG brass perforated sheet. 40 mm dia x 2 lengths each of 1.83 m connected with G.I. socket Total 170078.92
Item Breakup - H-N.S-Items.
Removal of trees with roots from the wall.
Annual maintenance of aqua 15Lt/Hour.RO Each water purifier(domestic) AMC, Unit of this item is each per annum.
Dewatering of water from Limited Height Per Month Subway for 24Hrs. By 10HP diesel pump sets including diesel, operator, light, T&P labour etc. complete as per direction of Engineer-in- charge. Hiring charges of Pump sets for. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY
Dewatering charges.
Operation of all required sluice valves at Each/month Colony/ station including supplying valvemen to provide timely water supply in Railway colony both in day and night shift i/c visiting all pump houses to see whether they are runningor not and informing to SSE/W. Visiting Over head tanks to see they are filled full or not, also visitng all times during valve operation in colony to water is being supplied in Rly. Qtrs and remain all time alert complete with all manpower,T&P,GST taxes etc.(Total 02 person require per day each in day and night shift) Total 295260.05
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022LatestcorrectionslipupdateduptoACS11.pdf
ATTACHMENT
PowerofAttorneyspecialcondition.pdf
ATTACHMENT
Instructionstotendererwithspecialconditions.pdf
ATTACHMENT
HQJPO_Digginginthevicinityofcable_20.05.24.pdf
ATTACHMENT
Zonespecialcondition-2026.pdf
ATTACHMENT
zoneno.07_11zon.pdf
ATTACHMENT
Download all tender documents and submit your bid