Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.3 L
EMD Value
₹6,620
Closing Date
12 Oct 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Er Karanjeet Singh
Executive Engineer PWD RandB Division Gandhi Nagar Jammu
Providing and fixing of Speed Breakers, Glow Studs, Delineator and Road Marking near RBI Staff, Quarters, Trikuta Nagar, Jammu (Under Road Safety Measures)
2026_PWDJK_327109_2
Short e-NIT No. DGN/86 of 2026-27 Dated 05-10-2026
Open Tender
Civil Works
Percentage
30 days
Trikuta Nagar Jammu
Please refer to e-NIT/SBD
3 documents required · 3 mandatory
₹600
Executive Engineer PWD RandB Division Gandhi Nagar
₹6,620
Jammu
5 Oct 2026
5 Oct 2026
13 Oct 2026
5 Oct 2026
12 Oct 2026
5 Oct 2026
8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of plastic speed breaker of size 250mmx350mmx50mm made of thermoplastic engineering alloy code AL1005 including interlocking sub units make it bind perfectly into one form bump. Colour of the material (black / yellow and UV stabilizers keep them perpetually colourful. studded with reflectors on either side, they are clearly visible to the motorists during night hours bearing capacity of load 50 tonne including all leads and lifts freight charges all complete. | 100 | Mtrs | 2,250 | ₹2,25,000 |
| 2 | Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge.The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | 300 | Each | 173.15 | ₹51,945 |
| 3 | Providing and fixing MS Delineator Post. | 12 | Each | 375 | ₹4,500 |
| 4 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | 77.56 | Sqm | 638.9 | ₹49,553.08 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_1106500.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .