Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.3 LAccepted-AOC 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC L1 bidder rate found reasonable | |
| 2 | L2₹93.3 L+₹10.3 L (12.4%)Rejected-Finance 2 EVEREST VIHAR PT T N MISHRA MARG NIRMAN NAGAR JAIPUR 302019 | JAIPUR | RAJASTHAN | 302019 | L2 | Rejected-Finance higher rate quoted | |
| 3 | L3₹1.1 Cr+₹23.1 L (27.8%)Rejected-Finance 12 53 CHOPASNI HOUSING BOARD JODHPUR 342 008 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L3 | Rejected-Finance higher rate quoted |
Tender Value
₹96.0 L
EMD Value
₹1.8 L
Closing Date
4 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JAISALMER
HQ CWE AF JAISALMER
RENOVATION AND ALTERATION OF CLASS ROOMS, TOILTS, STAFF ROOMS, CORRIDOR ENTERANCE AREA, HARDSTANDING, ROOMS, FLOORS AND OTHER CONNECTED IN KV AT AIR FORCE STATION UTARLAI
2022_MES_555473_1
80209/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF UTARLAI
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE AF UTARLAI
₹1.8 L
Yes
1 Dec 2022
1 Oct 2022
7 Nov 2022
1 Oct 2022
4 Nov 2022
22 Oct 2022
Amount
Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each, resecuring or easing and adjusting and refixing in the same opening complete all as specified and directed
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.
Taking down cement plaster of any description, on brick or stone walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles from site store and rubbish off the premises complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulatopn boards/false ceiling boards/slabs/blankets, any thickness, including cover fillets and framing work of any description complete all as specified and directed.
Demolition of brick/stone/block/PCC block work masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar faces and precast concrete articles complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, including cutting reinforcemnt to facilitate demolition complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar.
Taking up or down 15mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 25mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
Dismantaling of water tanks of capacity exc 250 litres and n.exc 500 litres and removing from site complete all as specified and directed.
Dismantling 75mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as specified and directed.
Dismantling 100mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as specified and directed.
Cutting chases, pinning in, making good to facings in brick/stone masonry walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not 10cm girth complete all as specified and directed.
Cutting into existing manholes for connecting new drains with inserting 150mm bore (internal dia) pipe , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins/springs clips also providing and fixing new ones complete all as specified and directed.
Excavating trenches in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft disintegrated rock complete all as specified and directed
Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
S&F 35 mm thick factory made 2nd class hard wood plain, framed , paneled shutters (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) , kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixed in opening as in door and cabinet of wash hand basin counter.as per specifications and making good the plaster of wall in cement mortar (1:6) complete all as per specifications and drawings.
S&F 30mm thick (Style) factory made solid panel shutter (PVC) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications and drawings.
S&F 30mm thick Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, and sandwiched (12x2) 24mm thick particle board , fixing in frame as per specification & drawing for cabinet shutter below Wash hand basin counter complete all as specified and directed
S&F factory made for box steel vantilator (with bottom portion fixed with pin headed glass pane and top portion with two top hungs shutters with one pin headed glass pane and other wiremesh with and including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on Drawings No. CEAA/TD/120 R dated 06 Jun 2002, Sheet no. 1/4 to 4/4. Note:- (i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass pens and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on Drawing No CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.
S&F anodized aluminium epoxy powder coated brown/white colour door with frame made of anodized aluminum frame size 101mmx44mmx2mm thick and anodized aluminum shutters having bottom rail of size 114mmx44mmx2mm, top rail 83mmx44mmx2mm thick, middle rail 85mmx44mmx2mm thick with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos brass lock 04 levers and key, floor door spring glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading complete all as specified and directed.
S&F anodized aluminium epoxy powder coated brown/white colour door shutter/partition made of anodized aluminum shutters having bottom rail of size 114mmx44mmx2mm thick, top rail 83mmx44mmx2mm thick, middle rail 85mmx44mmx2mm thick with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos brass lock 04 levers and key, floor door spring and hydraulically regulated door closer glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading complete all as specified and directed.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290.Gde-E-165 complete all as specified and directed.
S&F framed work as in doors or gates or coolar stand or other places with angle, tee, channel or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directed.
S & F 10mm dia and over mild steel TMT bars , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S & F 6 to 8mm dia mild steel TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S&F for 105x60mm size pressed steel frame for doors with one or more rebates with and including necessary lugs, hinges, locks strike plate etc complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden/aluminium beads complete all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters complete all as specified and directed.
S&F 3mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed
S&F as in repairs 3 mm thick frosted glass ordinary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed
S&F in repairs, 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note: (i) The cost of brackets and knobs deemed to be included in the quoted rate. Nothing extra shall be paid on this account. (ii) Bulbs and knobs decorative type shall be provided at free end.
S&F anodised aluminium snap grid frame work for false ceiling size of grid 605mmx605mm complete all as specified.
S&F Hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.
S&F 12mm thick Gupsum Board laminated with PVC film both side in ceiling fixed with screw as per manufacturer's instructions complete all as specified.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 250 mm long aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F in repairs 250 mm long aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F 200 mm long aluminium anodized barrel tower bolts of extruded section fixed complete all as specified and directed
S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section fixed complete all as specified and directed
S&F 150mm size extruded aluminium door handle fabricated type with base plate. anodised complete all as specified and directed
S&F in repairs 150mm size extruded aluminium door handle fabricated type with base palte, anodised complete all as specified and directed
S&F 150 mm long (overall length of cover plate) floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.
S&F in repairs 150 mm long (overall length of cover plate) floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.
M&L for 15 mm thick rendering cement plaster in cement mortar (1:6) on surfaces other than of fair faces of brick or concrete wall surfaces/ PCC Block masonry, finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on surfaces of fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement mixed with 3% integral water proofing compound by weight of cement complete all as specified and directed
M&L for 10 mm thick rendering cement plaster in cement mortar (1:3) on uneven faces of concrete surfaces in ceilings and finished even and smooth without using extra cement complete all as specified and directed.
Preparing new plastered surfaces of walls and distempering with two coats of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete all as specified and directed.
Complete removal of existing treatment on old plastered surfaces of walls, filling up undulation and distempering with two coats of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete all as specified and directed.
Preparing new plastered surfaces of walls and applying two coats of exterior emulsion paint (APEX of Asian Paints or equivalent in NEROLAC, JENSON & NICHOLSON, BERGER PAINTS) over a coat of primer of any colour as approved by GE complete all as specified and directed. Note: 1. Contractor shall furnish guarantee for period of 05 years on stamp paper worth Rs. 500.00 from the actual date of completion of work for rectification of defects. 2. Contractor shall deposit security amount as per scales laid down by the MES for security deposit. 3. Primer and exterior emulsion paint shall be of same manufacturer.
Preparing old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparing new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.
Preparing new concrete/ plastered of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.
Preparing old steel surfaces of any description, over 10cm in width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for Glazed ceramic coloured tiles (450mm x 300mm) x 7 mm thick on verticle surfaces such as skirtings, dados, risers and steps and the like, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15 mm thick plaster in cement mortar1:4 complete all as specified and as directed.
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for 20 mm thick Granite work ( table rubbed and polished)cooking platforms and like in 15mm thick cement morter (1:4) screed bed including pointing in white cement (1:2) using Marble dust with admixture of pigment to match with shade of Granite complete all as specified and directed.
M&L for rounding to edges of stone slabs one edge such as in steps,cooking platform,and other similer situations complete all as specified and directed.
M&L for 20mm thick Machine cut Kota stone slab flooring over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and directed.
M&L for 20mm thick Machine cut Kota stone slab as in riser of steps, skirting, dados etc over and including 15 mm thick rendering in cement plaster (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.
M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L for 75mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as sub base of flooring and finish the surface even and frough to receive top layer complete all as specified and as directed.
M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including form work and filling joints with sealing compound all as specified and directed.
M&L for reinforced cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole slabs, and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately )
M&L for precast reinforced cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and the like and set in cement mortar (1:4); including weathering, slightly rounded or chamfered angles and throating including necessary form work as complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately)
M&L for factory made precast coloured chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed
M&L for 60mm thick M-35 Grade factory made Rubber moulded coloured (Machine pressed) precast concrete interlocking paver blocks/tiles any shape and size with grey cement and pigment conforming to IS 15658-2006 laid over complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in filling back of pressed steel frame, bed blocks for hold fasts and the like including necessary formwork and making good the disturbed surfaces complete all as specified and directed.
M&L for precast cement concrete solid blocks masonry cement concrete (1:3:6) type C-I using 20mm graded stone aggregate, exc 10cm in width and set in cement mortar (1:6) etc complete all as specified and directed.
M&L for precast cement concrete block masonry in precast cement concrerte (1:3:6) type C-1 using 20mm graded stone aggregate with solid blocks not exc 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.
M&L for sand filing using sand suitable for plaster, under floor or in foundation including watering and consolidation complete all as specified and as directed.
M&L for factory made kerb stone of M-25 grade cement concrete at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed,
Supply only integral water proofing compound complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary GI clamps etc complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius including laid in trenches and fixed with PVC adhessive complete all as specified and directed.
S&F 75 mm bore PVC (SWR) single junction 'T' equal or unequal any radius including laid in trenches and fixed with PVC adhessive complete and directed.
S&F in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with "P" or "S" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge . Make : Cera or equivalent , Cat part No. S1013119 or equivalent
S&F oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed. Make: - Jaquar or equivalent.
S&F in repair 15mm bore Pillar taps pressematic type with aerator automatically off with delay , fancy type , long body , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe. Make : Cat part No. F9020101 of Cera or equivalent in Jaquar, Kingtson, Prayag, Sieco.
S&F 150 mm bore (internal dia) SGSW, laid on concrete bed to required slope in trenches and jointed complete all as specified and directed. Note:- Excavation, Earth work and Concrete bed shall be measured and paid separately)
M&L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 150 mm bore reinforced cement concrete pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
S&F 15mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading, laid in trenches/floors, fixed to walls and ceilings etc complete all as specified and directed
S&F 20mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading, laid in trenches/floors, fixed to walls and ceilings etc complete all as specified and directed
S&F 25mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading, laid in trenches/floors, fixed to walls and ceilings etc complete all as specified and directed
Relaying or refixing 15mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading, laid in trenches/floors, fixed to walls and ceilings etc complete all as specified and directed. (Note:- Old retrieved serviceable GI pipe shall be reused)
Relaying or refixing 20mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading, laid in trenches/floors, fixed to walls and ceilings etc complete all as specified and directed. (Note:- Old retrieved serviceable GI pipe shall be reused)
Relaying or refixing 25mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading, laid in trenches/floors, fixed to walls and ceilings etc complete all as specified and directed. (Note:- Old retrieved serviceable GI pipe shall be reused)
S&F in repair vitreous china wash down water closet (Pedestal pattern) including connection to drain (or out going pipe) and fixing to flushing pipe, anti-sypohonage pipe etc. with plastic water closed seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device hinge device, complete all specified and directed. (Note:- PVC seat cover, flushing cistern and flush pipe shall be measeued and paid for supply only under respective items)
S & F in repairs vitreous China water closet Sqatting pan, "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foot rests any pattern including connecting pipe of CI at suitable bore and length and including fixing of Cistern, flush pipe including provision of lean cement concrete bedding in PCC (1:5:10) type E-2 and making good to disturbed surface etc but excluding supply of flushing cistern and flush pipe complete all as specified and directed. (Note:-PVC seat cover, PVC flushing cistern and flush pipe shall be measeued and paid for supply only under respective items)
S&F in repairs vitreous China bowl urinal flat back, minimum size 465 x 355 x 265/430 x 370 x340 mm ,white colour, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipecomplete allas specified and as directed.
S&F in repairs chromium plated urinal spreader complete all as specified and as directed.
S&F in repair 15mm bore Health faucet chromium plated of standared quality and make with high denesity chromium plated flexible pipe of minimum length 1.50m and ABS wall hook including making connections and fixing in position complete all as specified and directed.
Supply only 32 mm dia flush pipe of polyethylene of low or high density or PVC for low level flushing cistern suitable for IWC, EWC and anlo-Indian water closet complete all specified and directed.
Supply only 10 litres capacity low level PVC valveless syphonic action type flushing cistern with inlet ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fittings, 32 mm bore PVC flush pipe with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and directed.
S&F in repairs 15mm bore brass chromium plated (fancy type) stop valve / angle valve , with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.
S&F in repair 15 mm size PVC connection 600mm long with chromium plated brass nuts/adaptors complete all as specified and directed.
S&F 32mm dia PVC flexible pipe fixed as waste pipe for urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.
S&F in repair 75mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls as specified & as directed.
S&F in repair 100mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.
S&F in repairs 75mm bore of outlet, cast iron floor trap, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)complete all as specified and directed.
S&F in repairs 100mm bore of outlet, cast iron trap for WC without grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)complete all as specified and directed.
S&F in repairs 100mm bore cast iron connection socket/TEE/Elbo to fit out let of WC complete all as specified and directed.
S&F in repairs 75mm bore cast iron bends/elbo with oval access door etc complete all as specified and directed.
S&F in repairs 150mm x 150mm salt-glazed stoneware gully traps, square or round mouthed, type 'P' of size with 150mm dia outlet pipe set and jointed in cementmortar (1:1) complete all as specified and directed.
S&F in repair 75mm bore Cast iron Tee, socket, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F in repair grating dome 125/150 mm dia of stainless steel with or without hole complete all as specified and directed.
S&F in repair 15 mm dia bib tap cast copper alloy, Chromium plated ,'with crutch or butterfly handle, screwed down high pressure for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs Chromium plated shower rose 100 mm dia with 125mm long CP arms, with or without swivel joints, including fixing complete to steel pipe or union complete all as specified and directed.
S & F in repair 15mm bore Chromium plated, cast copper alloy concealed type stop cock , fancy type, with long shank and cup complete all as specified and directed.
S&F 500 litres capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.
M&L for 15 mm thick rendering cement plater in cement mortar (1:3) finished even & smooth without using extra cement and for water proof surface of sunken floor mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed.
M&L for applying water proofing coating in 2 layers with Dr Fixit 2 component 112 Pidifin 2 K . the gap between 1st and 2nd layer minimum 6-8 hrs for surface of sunken etc as per manufacturer's instructions complete all as specified and directed.
M&L for applying 45 gsm thick glass fibre mesh in sunken floor complete all as specified and as directed.
S&F 40mm bore UPVC (unplasticised PVC) pipe with pressure 10 Kgf/Sqcm laid in trenches or fixed to wall, ceilings and floors etc complete all as specified and as directed.
S&F in repairs 20mm dia brass chromium plated tubular towel rail , "D" type, 60 cm long between flanges complete all as specified and as directed.
S&F Chromium Plated toilet paper holder fixed on wall with PVC washers and dash fastners complete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in bed blocks, parapets, plinth courses, string courses, coping, apex stone, lacing couses and other places as required including necessary formwork and making good the disturbed surfaces complete all as specified and directed.
Preparing old concrete/ plastered surfaces of any description, over 10 cm in width or girth, not otherwise described and applying 2 coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for providing cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in coping, surface channel of manholes/ drains, cills, hold fast, backfill of PS chowkhats, benching for manhole and the like; including weathering, slightly rounded or chamfered angles and throating including necessary form work as complete all as specified and directed.
Rasam Engg Co.
M/s godara infratech and power industries
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .