Installation, alignment and commissioning of pumps with diesel and electric engine, laying of MS pipeline with flange welding , fabrication of tee and bends, collection of pipes, dismantling of MS pipes, fabrication and repairing of pontoon and other

Amount

Installation, commissioning & alignment of different types of pump sets (electrical with starter and mechanical engine sets) including fitting of suction pipe, delivery pipe & valve etc. as required at main sumps of Kaniha OCP

Dismantling & shifting of pumps with diesel engine/motor set including sluice valve, non-return valve and foot valve with suction pipe bend etc. from one place to another place.

Recovery of pontoon, shifting and installation of pontoon from one sump to another sump, from pump section to sump , sump to pump section as and when required.

Re adjustment of Pontoon on Decrease and incerease water level, Opening and Installation Jetting Hose, fiting of Short piece pipe or Opeining of Short piece pipe

Making of 4” dia Tee, Reducer, bend including flange welding

Making of 6” dia Tee, Reducer, bend including flange welding

Making of 8” dia Tee, Reducer, bend including flange welding

Making of 4” short pipes by gas cutting and welding

Making of 6” short pipes by gas cutting and welding

Making of 8” short pipes by gas cutting and welding

Shifting of 4 inch MS pipe manually within a lead of 100 meters where the side is not motorable/slope terrain/different benches in mines whereever required

Laying and adding of 4” dia Pipeline including earth cutting, surface leveling, heap cutting & Alignment as and when required

Shifting of 6 inch MS pipe manually within a lead of 100 meters where the side is not motorable/slope terrain/different benches in mines whereever required

Laying and adding of 6” dia Pipeline including earth cutting, surface leveling, heap cutting & Alignment as and when required

Shifting of 8 inch MS pipe manually within a lead of 100 meters where the side is not motorable/slope terrain/different benches in mines whereever required

Laying and adding of 8” dia Pipeline including earth cutting, surface leveling, heap cutting & Alignment as and when required

Rubber insertions for 100 mm dia pipe joints

Rubber insertions for 150mm dia pipe joints

Rubber insertions for 200 mm dia pipe joints

Supply of Nuts & Bolts (M.S size 2”,21/2” 3”)

Dismantling of 4” DIA MS pipeline and stacking aside as and when required.

Dismantling of 6” DIA MS pipeline and stacking aside as and when required.

Dismantling of 8” DIA MS pipeline and stacking aside as and when required.

Installation of 6” dia and 8 " dia Sluice valve to the existing suction pipe line of diesel/electrical pump including shifting material to work site

Installation of 6" and 8” dia Non Return Valve to the existing suction pipe line of diesel/electrical pump including shifting material to work site

Installation of 10 " dia Foot valce to the existing suction pipe line of diesel/electrical pump including shifting material to work site

Welding of flange with MS Pipe of 4" dia

Welding of flange with MS Pipe of 6" dia

Welding of flange with MS Pipe of 8" dia

Providing of M.S. flanges (as per table D) and welding with MS Pipe of 4" dia

Providing of M.S. flanges (as per table D) and welding with MS Pipe of 6" dia

Providing of M.S. flanges (as per table D) and welding with MS Pipe of 8" dia

Collection of MS pipes of 4” and 6” from Regional store or Jagannath store or mine including loading and unloading and stocking at Kaniha OCP, transportation by dept vehicle

Handling/ collection and stacking of pipe after flange welding pipe at site store and to site

Realignment of the motor/engine with pump as per requiement

Dismantling of upper casing and lower casing for the repairing of the pump

Providing of drum (make- steel, dia- 600 mm, height- 900mm, minimum thickness- 2mm) along with Errection/lifting/ cleaning of the steel drum into the steel structure for making of one no. of six drum steel barge

Providing of drum (make- steel, dia- 600 mm, height- 900mm, minimum thickness- 2mm) along with Errection/lifting/ cleaning of the steel drum into the steel structure for making of one no. ten drum steel barge

Providing of drum (make- steel, dia- 600 mm, height- 900mm, minimum thickness- 2mm) along with Errection/lifting/ cleaning of the steel drum into the steel structure for making of 60 drum steel barge for fabrication of four nos. of steel barge

Loading, transportation and errection of the shed on the pontoon for protection of the engine and pump set - 6 nos. of shed.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete-new 2 Nos. of 60 drum pontoon + new 4 nos. of 10 drum pontoon+ repairing of 6 nos 60 drum old pontoon + repairing of 12 nos. of 10 drum old pontoon +repairing of 6 nos. of 6 drum old pontoon

Dis-assembling of the steel structure by cutting and grinding using gas cutter for revomal of the old drums-for repairing of 6 nos 60 drum old pontoon + repairing of 12 nos. of 10 drum old pontoon +repairing of 6 nos. of 6 drum old pontoon

Dis-assembling of damaged perforated drums and erection of new drums for repairing of pontoon - repairing of 6 nos 60 drum pontoon + repairing of 12 nos. of 10 drum pontoon +repairing of 6 nos. of 6 drum pontoon

Fabrication and erection of old steel structure for repairing of pontoons - repairing of 6 nos 60 drum pontoon + repairing of 12 nos. of 10 drum pontoon +repairing of 6 nos. of 6 drum pontoon

Painting with synthetic paint with approved brand and manufacture to give an even shade: Two or more coats on new work-8 Nos. of 60 drum pontoon + 16 nos. of 10 drum pontoon+ 6 nos. of 6 drum poontoon

Excavating trenches of required width for pipes, cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upt0 1.5 m , in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as required., with in lead of 50 mtr, Pipe exceeding 80mm, not exceeding 300mm dia

Transportation of MS pipes ( 10 ", 8 ", 6 " and 4 ") including loading, unloading and shfting within the mine premises

Shifting of 10 inch MS pipe manually within a lead of 100 meters where the side is not motorable/slope terrain/different benches in mines whereever required

Laying and adding of 10” dia Pipeline including earth cutting, surface leveling, heap cutting & Alignment as and when required

Dismantling of 10” DIA MS pipeline and stacking aside as and when required.

Rubber insertions for 250 mm dia pipe joints

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

OMM SHANKAR TRANSPORT