REPAIRS TO JOINERY IN CERTAIN OTM AND MD ACCN AND REPAIRS TO DRAINS HARDSTANDINGS FENCING PATHS IN EME CENTRE AT BAIRAGARH UNDER GE BHOPAL

Amount

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 2 Sqm each complete all as specified and directed

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L for factory made Second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skeleton window shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F Flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars including cutting holes in brick walls and making good dismantalled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required, complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars including cutting holes in brick walls and making good dismantalled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required, complete all as specified and directed.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay with additional MS sash bars and and MS flats for fixing of wire gauge/glass panes including cutting holes in brick walls and making good dismantalled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required, complete all as specified and directed.

S&F double rebate openable /fixed windows made of galvanised steel colour coated /powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 grams /sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick outer frame section 72 x 55mm, centre mullion section 72 x50 mm, shutter section 47 x20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x12 mm, outer frame and mullion shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars /grills, the sections cut to length mitre joined with corner bracket, centre mullions cap, stay, handles, latch, 2 Nos tower bolts,2 Nos of heavy duty stainless steel pivot hinges per shutter and penelled with 5mm thick plain float glass and SS mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self expanding screws, including 10mm square bars welded to 6x12mm flat at a distance 150mm C/C (pitch) etc. complete all as specified and directed. Make : NCL Allek Seccolor Ltd (Model :ECO 4000) or equvalent a approved by GE)

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for Plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; handmade sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed.

S&F in repairs Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed.

S&F 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs decorative mild steel chromium plated, 19mm dia, minimum thickness 1mm, curtain rod with side fixing brackets, rings & decorative knobs complete all as specified and directed.

S&F in repairs Prelaminated particle board 18 to 19 mm thick, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed.

Demolition of Brick or stone massonry work built in cement or cement lime mortar complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. [MAKE:-M/s RAJSHRI PLASTIWOOD / M/s SINTEX INDUSTRIES / M/s POLY WINDOWS / M/s DURA PLAST / / M/s ACCUCELL as approved by GE.]

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. [MAKE:-M/s RAJSHRI PLASTIWOOD / M/s SINTEX INDUSTRIES / M/s POLY WINDOWS / M/s DURA PLAST / / M/s ACCUCELL as approved by GE.]

Taking down Aluminum door upto 4 Sqm each and refixing in same position after carry out necessary repairs including replacing rubber/aluminum beading and jointing cleats, tightening if required including making good existing surface, complete all as specified and directed. Note : any aluminium style, rail,frame, floor spring hydraulic door closer if required to be replaced will be measured and paid separately under respective items.

Supplying & fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO as approved by GE]

S&F in repairs Prelaminated particle board 12 mm thick, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed.

S&F for door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminum extruded section body, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specified, complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for Brick work or brick tiles in broken edge walls (less than half brick thick) built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs, cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for Reinforced cement concrete nominal mix type B-1, ( 1:2:4 ) (Using 20 mm graded crushed stone aggregate ) as in walls, retaining walls, basement walls, ballast walls and the like; above top of footings including attached pilasters and buttresses, complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia cut to length, in stirups, spacers etc, complete all as specified and directed

M&L for Formwork to fair finished surfaces of flat walls, retaning walls, abutments, parapets and staircase raillings and simillar work, including attached pillasters, buttresses, etc; vertical or batter, complete all as specified and directed.

S&F reinforced concrete pipes, class NP2, 300 mm bore, laid and jointed with collars, including dismantiling reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches including taking out old pipe, complete all as specified and directed.

M&L for Concrete bed to drain pipes 300 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. (Note:-Reinforcement to be measured separately).

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Dismantling of posts or struts (Wood, steel or RCC) any section including taking out embedded portion from concrete, brick work, masonry, etc. and making good disturbed area, complete all as specified and directed.

Dismantling fencing wire mesh any type any size, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in hard / dense soil, complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

Supply only mild steel Galvanised wire Chain link fencing square mesh of size 50 x 50 mm made out of 4 mm dia wire, complete all as specified and directed.

S&F for Mild steel angle iron as in posts and struts including embeding in concrete , notching for wire , cutting tops to shape,drilling holes, bolting etc., conforming to Fe 290 Gde E-165, complete all as specified and directed.

Supply only mild steel 10 mm dia round bars to secure Chain link fencing, complete all as specified and directed.

S&F Mild steel flat iron, tie bars with screwed ends, nuts, washers for securing Chain link fencing including cutting ,drilling holes, bolting etc., conforming to Fe 290 Gde-E-165, complete all as specified and directed .

Mild steel screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other ends with washers 12 mm dia and n exc 5 cm long, complete all as specified and directed.

S&F for galvanised 2 strand steel barbed wire 2.24mmn dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, icl securing or typing at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Restraining resecuring galvanised 2 strand steel barbed wire 2.24mmn dia barbed with 2mm dia barbs at 75mm spacings and including making good with wire staples or steel pin etc, complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2 1:2:4 (40mm graded aggregates) as in sub base or flooring, complete as specified and directed.

M&L for 40mm thick cement concrete type B-1 1:2:4 (20mm graded aggregates) as in toping of floor, complete as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in floors, etc, 75mm thick, laid in panels and finished even & smooth using extra cement complete all as specified and directed.

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES]

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc. 15 cm thickness (below or above ground level), complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 66515.00

M/S BRIJLAL UPADHYAY

RAJPATI CONSTRUCTION

PADAMSHRI CONSTRUCTION CO

MS Soumya consultants and designers