SPECIAL REPAIRS TO CERTAIN ROADS IN 202 ENGRS REGT AREA, OFFICERS ACCN IN SIKH VILLAGE AND OFFICERS ACCN IN NAPIER LINE UNDER GE(NORTH) SECUNDERABAD

Amount

M&L for repairs to pot holes not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying tack coat of 5 kg per 10 sqm using paving bitumen VG-10, putting in premixed bituminious macadam, well rammed and sealed with binder 9.80 kg per 10 sqm VG-30 blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc. 30 mm all as specified and as directed.

M&L for repairs to pot holes of any depth and not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by filling screnned graded road metal , watering and well ramming (including supply of road metal ), complete all as specified and as directed.

M & L for premix bituminous macadam using paving bitumen any penetration @ 4% by weight of total mix, laid / rolled compacted to required gradient and camber( consolidated thickness 75mm or less) all as specified and as directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG-30 grade complete all as specified and directed

M&L for bituminous premixed semi dense asphaltic concrete consolidated thickness 30 mm with 5.5 % binder content by weight of total mix using paving bitumen VG -30 grade, mixed in hot mix plant, rolled and compacted to required camber and gradient etc, with mechanical paver and rolled with 8 to 12 Tonne power roller and all as specified and directed.

M&L for 100 mm thick (spread thickness) approved moorum/red bajri for berms including spreading, levelling, watering and rolled with hand roller of 0.2 to 0.5 tonne capacity to required camber and gradient complete all as directed. NOTE:- Moorum shall be brought from outside MOD land.

M & L for Painting lines, dashes, arrows, letters etc. on road surfaces / over speed breakers, pavements and the like exc 10 cm and n. exc 30 cm wide with 2 to 3mm thick thermoplastic road marking paint using automatic road marking spray machine including preparing black top surface by fanning out dust and any other foreign matter complete all as specified and directed.

S&F in repairs road deliniators as per IRC-79-1981 ( Road way indicators ) with ABS round body fitted with 2 Nos 100 mm dia, 50 micron thick , highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 mm dia, 16 G powder coated and the poles grouted in PCC foundation complete all as specified and as directed. Make : Dark Eye Modal No DA-74 / 3 M/ Mr. Illumination. / Aktion Note : Rate includes for excavation, PCC 1:2:4 , Type B1 foundation.

S&F solar studs AK - 970 of Aktion make pasted on bituminous / concrete surfaces with adhesive as per manufacturer's instructions complete all as directed. Make : Akiton or equivalent in 3M / Mr. Illumination / Dark Eye

S&F Road cat eyes duly fixed with approved adhesive as per manufacturers instructions complete all as specified and as directed. Make : 3M of series 290C or equivalent model in Mr. Illumination / Dark eye/Aktion as approved by GE.

M&L for rubber based speed bumps of dimensions 500x420x75mm with reflective arrow stickers on both side with combination of approved colours( black and yellow) fixed with necessary bolts etc., complete all as specified and as directed.

S&F Convex mirror of 1000 mm dia made of poly carbonate material fix to 100mm dia MS post 50mm nominal bore and of wall thickness 3.65mm conforming to IS-1161-1979 of grade St-240 of 3 metre long including two coats of epoxy paint and including necessary earth work and execation in post holes and PCC bed block 1:2:4 type B1(using 20mm size graded stone aggregates) of size 450x450x600 mm, including removal of surplus soil and levelling of distrubed ground complete all as specified and directed.

Demolition of brick masonary or stone masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashiar facing dressed stone work and precast articles complete all as sepcified and directed

Taking down cement plaster on brick or stone masonry wall etc including racking out joints hacking for key, scrubbing down with water etc as in internal and external suraces of manholes, septic tank, ailter bed etc including removing of debrie complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and directed.

Demolition of cement concrete any description including raking out joints, hacking for key, scrubing down with water etc., complete all as specified and directed.

M&L for stone walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc. 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc. 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in surface channel complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought up to course in cement mortar 1.:4 complete all as specified and directed

M&L for Extra for forming fair finished drain or channel 25cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stop ends etc. complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam including soling surfaces if required in area not exc. 400 sqm and exc 50 mm and n exc 100mm deep and removing materials from site of work or stacking for reuse at site complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out as in hard/dense soil all as specified and as directed.

Removing excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and as directed.

M & L for 100mm thick PCC 1:4:8 type D-2 (using40mm graded stone agregate) finished fair & rough as in sub base flooring and paving completed all as specified and directed.

M&L machine pressed precast conctete interlocking paver block any shape and size confiriming to IS 15658-2006 of 80 mm thickness, M 40 grade with grey cement and pigment (Coloured) complete all as specified and as directed.

M&L for sand filling under floors or in foundations or in cushion of paver blocks , under ground cables etc. including watering and consolidation complete all as specified and as directed.

Sri Lakshmi Enterprises

shree bhavani constructions

K CHANDRAPAL REDDY