Electrical works for Construction of 3 Sheds viz., i). Construction of 145M x 20M Shed (1 bay - 2 lines). ii). Construction of 48M(W) x 78M(L) Shed (Proposed Paint shed - 3 bays & 6 lines). iii). Extension of existing MUTP Stores Shed 60x20M on the Southern side of Shop-19. (under VB-II Coach Project)

A-Construction of 3 Sheds viz., i). Construction of 145M x 20M Shed (1

Supply & erection of LT Panel board consisting of 3 no's of 1000 A, 4 pole, 65 kA ACB panel with top bus bar arrangement for connecting BBT (only for 2 ACBS) as per ICF Specification.

Supply & Erection of 8 way SMDB with incomer as 400A TPN 36KA Thermal magnetic release MCCB-1 No and outgoing as 100A TP 25KA MCCBs - 8 Nos along with required metering box 2 fitted with 3 no's 96 x 96 Digital Ammeter for individual phases and 1 no 96x96mm 3 phase Digital Volt meter and 1 No Selector switch and provision of left & right side cable end boxes & 4 no's corner filler boxes and base mounting assembly to be provided at bottom and RYB indication with required CTs and necessary wiring for Meters, Lamps, CTs, Complete set as per ICF Specification.

Supply of Two bay lighting and ventilation control cubicle panel including all components like four knife switch isolators, contactors, timer etc., as per ICF drawing ICF/EL-1550 (3 Sheets) and as per ICF Specification.

Installation, Testing and commissioning of lighting and ventilation panel with MS channel, grouting bolts and other masonry materials as per ICF Specification.

Supply of 300 Sq.mm, 3 1/2 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 185 Sq.mm, 3 1/2 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 70 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 35 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 16 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply & laying of single core, 240 Sq.mm multistrands, PVC insulated flexible Copper cable as per ICF Specification.

Laying of LT XLPE Aluminum and Copper cables up to 300sq.mm, in cable trays/trenches as per ICF specification.

Supply & laying of 4 core, 25 Sq.mm armoured Copper cable as per ICF Specification.

Supply & laying of 4 core, 10 Sq.mm armoured Copper cable as per ICF Specification.

Supply & Erection of End termination of UG Al cable 3.5/4 core, upto 50 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply & Erection of End termination of UG Al cable 3.5/4 core, 70/120/185 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply & Erection End termination of UG Al cable 3.5 core, 240/300/400 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply & Erection of End termination of flexible copper cable of size 240 sq.mm with all required items like proper glands and copper crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply of MS hot dip galvanized Cable tray of size 300mm (W) x 2500mm (L) x 100 mm (H), to type no.4 of Drg. No. ICF/EL/1236 as per ICF Specification.

Fixing and interconnection of Cable Tray of size up to 500mm in walls/pillars and supporting it with proper clamps and harware as per ICF specification.

Supply, Fabrication, Erection and painting of 50 x50 x 6 MS angles/MS Square Tubes/MS Channels for supporting cable trays and all Types of Electrical Controls Boxes as per ICF Specification.

Supply, installation, testing & commissioning of Sandwich type, 800A bus bar 21 trunking system with Aluminum bus bar, minimum 50kA, for 1 Sec, IP54 min Protection, 415V, plug in bus duct with 100% neutral, 50% integral earth without external earth strip, minimum Class B insulation, 1.6mm thickness electro galvanized sheet steel enclosure, painting, Straight length with 3 tap-off point in a 3mtr length as per specification.(Quote for 1 mtr length) as per ICF Specification.

Supply & installation of flange end with cable end box suitable for 800A Bus bar truncking system with aluminum cable glanding as per ICF Specification.

Supply of End Cover (suitable for Sandwich type, 800A busbar trunking system with aluminum bus bar) as per ICF Specification.

Supply, Fabrication, Painting and Erection of ISMC 100mm x 75mm, angles and flats of various sizes as per ICF Specification.

Supply, Fabrication, Painting and Erection of ISMC 150mm x 75mm, angles and flats of various sizes as per ICF Specification.

Supply, installation & testing of 125A, TPN tap off box fitted with MCCB+ ROM+ Spreader links trunking suitable for plugging to 800A bus bar trunking system as per ICF Specification

Supply & erection of 3 pole 125 A, MCCB 415 V 36 KA, and 125 A 3P+N+E Three phase De-Contactor Plug & Socket assembled in IP -55 enclosure Box as per ICF Specification.

Supply, installation & testing of 63A, TPN tap off box fitted with MCCB+ ROM+ Spreader links trunking suitable for plugging to 800A bus bar trunking system as per ICF Specification

Supply of 63 A, 415 V, three phase Modified De- contactor Box with MCB, RCCB and Earth Continuity monitoring circuit as per ICF Specification.

Erection, Testing and Commissioning of 63 A, 415 V, three phase Modified De- contactor Box with MCB, RCCB and Earth Continuity monitoring circuit as per ICF Specification.

Supply of Single Phase, Two Circuits (4 Live conductors) Lighting Bus way 40 Amps, Straight length with Tap-off provision along with blanking plate as per ICF specification. (Quote for 1 mtr length)

Supply of End Feed units with cover suitable for Lighting Bus Bay 40 amps (4 Conductors) as per ICF specification.

Erection (laying, Fixing, suspension), Testing and Commissioning of Lighting Bus way 40 Amps of Straight length with all accessories like, End feed unit, fixing bracket, Tap-off units, 12mm threaded rod and all other accessories as per ICF specification.

Supply of 16 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF Specification.

Supply and Erection of 230/ 24 V, 3 kVA safety transformer with fixing frame and required hardware and termination of cables as per ICF specification.

Supply and Erection of plug and socket box with 3 no's of 24 volts butt type BCH plug and socket controlled with 1 no of 16 A Double pole MCB and 3 nose of 10Amps Double pole MCB in sheet steel enclosure as ICF drawing and as per ICF Specification.

Supply and Erection of 7.5KVA 415/110V Transformer with 32 A DP MCB as Incomer & 125A DP SFU as outgoing mounted in a sheet steel enclosure of 2mm thickness along with fixing stand as per ICF Specification.

Supply of 2 core 16 sq.mm armoured copper cable for incoming to 7.5 KVA transformer as per ICF specification.

Supply of 110 V AC Plug and Socket in Distribution board completely wired and with all accessories similar to KAEDRA Distribution system of M/s. Schnider Electric consisting of the 39 following to ICF Specification: - a) Kaedra Distribution Board similar to Cat No. 13176-1 No. b) Wander Plug 16A, 2P+E, PK, IP44 similar to Cat No.PKE 16M413-----2Nos. c) Panel Socket 16A, 2P+E, PK, IP67, similar to Cat No. PKF16F413----2Nos d) C60N, 16A, 2P MCB 'C' Curve ----2 Nos. The Cat Nos. referred are of M/s. Schnider Electric as per ICF specification.

Erection of 110V AC plug and socket box as per ICF Specification.

Supply of Control panel for air circulator to ICF drawing no. ICF/EL/1513 Alt 'b' and as per ICF specification.

Erection of Control panel for Air circulators and as per ICF specification.

Supply of BLDC Heavy Duty Wall mounting Air circulators of Sweep 24" (600mm) dia as per ICF Specification.

Erection of 600 mm sweep Air circulator with proper framework and termination with 1.5 Sq.mm PVC flexible copper cable run from the control panel as per ICF Specification.

Supply of 18 W (4 feet) LED Tube Light & Batten as per ICF Specification.

Fixing of 18 W LED Tube Light Luminaire & Batten as per ICF Specification.

Supply of 10 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF specification.

Supply of 150 W LED High Bay Industrial Luminaire Fitting with IP-66 (min) Protection powder coated die - cast aluminum housing with weatherproof gasket for lamp and control gear for Industrial application. (Scope Includes all Accessories as per ICF Specification).

Fixing Testing and Commissioning of 150W LED High Bay Light Fitting in roof with supply and fabrication of suitable bracket in necessary fixing hardware as per ICF Specification.

Supply & erection of 230V AC Socket Box consisting of 2P, MCB 1 No & RCCB (30mA sensitivity) 1 No with 16A Socket as per ICF Specification

Supply and Erection of Battery Charger with output of 110V DC, 200 amps suitable for working with 415 V, 3 phase Incoming supply as per ICF specification.

Supply and erection of 110 V, DC Plug and Socket in distribution board completely 52 wired and with all accessories consisting of a). 1 no. of Plug & Socket box with SP MCB Cut out (Make BCH: SSEU303-SSC-MCB 1P) b). 1 No of Panel mounting socket (make BCH: 2415B) c). 1 No of Plug with included Handle 9 Make BCH: 215B) d). 1 No of 32 A, SP MCB as per ICF Specification.

Supply and Erection of 8"x 4" MS Junction Box with 5 Terminal SMC pad consisting of 5 no's of 6mm studded terminal suitable for 32A amps rating as per ICF Specification

Supply and Installation of 2-way Roof Mounted Over Headline Supply indication light Box as per as per enclosed ICF specification.

Supply and Running Of 3 runs of PVC, FRLS 1.5 sq.mm copper cable (Red, Black, 55 Green) in 1"" PVC conduit/Casing Capping and accessories duly fixing the conduit in wall using hardware. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per ICF Specification. (One span shall consist of one metre length of 3 runs of single core 1.5 sq.mm cable, PVC pipe, PVC accessories and Hardware etc.,)

Supply and Running Of 2 no's of 2.5 sq.mm PVC, FRLS copper cable and 1 no. of 1.5 56 sq.mm PVC copper cable in 1" PVC conduit/Casing Capping and accessories duly fixing the conduit in wall using hardware. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per ICF specification. (One span shall consist of one meter length of 2 runs of single core 2.5 sq.mm & 1 run of 1.5 sq.mm cable, PVC pipe, PVC accessories and Hardware etc.,)

Supply of 45W LED Street light fitting with IP protection as per ICF Specification.

Fixing, Testing & Commissioning of 45W LED Street light fitting as per ICF Specification.

Supply & erection of DB for pit light with consisting of Incoming : 32A 24V AC MCB- 1No Outgoing : 6A 24V AC MCB-4 Nos as per specification.

Supply & installation of waterproof junction box with glands & terminals studs-sintex 2817JB as per ICF Specification.

Supply of 18 watts, LED luminaire for Pit line lighting as per ICF Specification. (with LED lamps of ultra bright white light)

Erection of 18 watts, LED luminaire for Pit line lighting as per ICF Specification.

Breaking & Redoing of concrete portion using contractors own materials as per ICF Specification.

Supply, Erection, Testing and Commissioning of Earthing Electrode to Drg No. ICF/EL/1289 inclusive of supply of all reqd. materials like 50 mm dia pipe, copper strip of size 25 x 3 mm, all reqd. hardware and all other materials etc., as per ICF Specification.

Supply of 25 x 3 mm GI strip for earthing as per enclosed ICF Specification.

Fixing/Laying of GI strip of size up to 50x6 mm in the trays/ pillars with required GI brackets and GI hardware as per ICF Specification. (Brackets and hardware forms contractors' scope of supply)

Supply and laying of 8 SWG Copper wire as per ICF Specification.

Supply of 2 HP Single Phase submersible dewatering pump for pit line as per ICF Specification.

Installation of up to 2 HP single phase submersible dewatering pump for pit line as per ICF Specification

Supply of 50 Pair Polythene insulated, Polythene Sheathed, Jelly Filled Armored U.G. 70 Telephone Cable confirming to Specification No. TEC GR NO. GR/CUG -01/ 03. Aug 2003 or Latest. The Cable Shall be of Minimum 500 Mtrs . of continuous length of and wound on a wooden drum confirming to Specification No. TEC GR.No. G /CBD - 01/ 02 Nov 94.

Supply and mounting of KRONE make 50 pair outdoor connection box with 10 pair LSA Disconnection modules, back mounting frame, lable holder (complete set) as per ICF Specification.

Laying of 50 pair, Armored U.G. Telephone Cable in open trench as per ICF Specification.

Laying of 50 pair, Armored U.G. Telephone Cable in tray as per ICF Specification

Supply of 5 Pair PVC Switch Board Cable with 0.5mm dia Copper Conductor Conforming to latest TEC Spec. TEC Specn. No. G/WIR-06/02 OF MAY'1994 or latest.

Supply of 6 UTP Cable as per ICF specification.

Supply & installation of 1" Rigid PVC Conduit with all accessories duly inserting the telephone & Cat 6 cable as per ICF Specification.

Supply & installation of Dual I/O Face plate with IO Jack CAT6 as per ICF specification.

B-Construction of 48x78 M Paint Shed at ICF.

Supply & erection of LT Panel board consisting of 3 nos of 1000 A, 4 pole, 65 kA ACB panel with top bus bar arrangement for connecting BBT (only for 2 ACBS) as per ICF Specification.

Supply, installation & testing of 250A, TPN Tap off box fitted with MCCB+ ROM+ Spreader links truncking suitable for plugging to 800A bus bar trunking system as per ICF specification

Supply & Erection of 8 way SMDB with incomer of 400A TPN MCCB & Outgoing of 3 63A-100A TP MCCB with incomer as 400A TPN 36KA Thermal magnetic release MCCB and outgoing as 100A TP 25KA MCCBs along with required metering box fitted with 3 no's 96 x 96 Digital Ammeter for individual phases and 1 no 96x96mm 3 phase Digital Volt meter and 1 No Selector switch and provision of left & right side cable end boxes & 4 no's corner filler boxes and base mounting assembly to be provided at bottom and RYB indication with required CTs and necessary wiring for Meters, Lamps, CTs, Complete set as per ICF specification.

Supply of Two bay lighting and ventilation control cubicle panel including all components like four knife switch isolators, contactors, timer etc., as per ICF drawing ICF/EL-1550(3 Sheets) and as per ICF specification.

Installation, Testing and commissioning of lighting and ventilation panel with MS channel, grouting bolts and other masonry materials as per ICF Specification.

Supply of 300 Sq.mm, 3 1/2 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 185 Sq.mm, 3 1/2 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification

Supply of 70 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification

Supply of 35 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 16 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply & laying of single core, 240 Sq.mm multistrands, PVC insulated flexible Copper cable as per ICF Specification.

Laying of LT XLPE Aluminum and Copper cables up to 300sq.mm, in cable trays/trenches as per ICF specification.

Supply & laying of 4 core, 25 Sq.mm armoured Copper cable as per ICF Specification

Supply & laying of 4 core, 10 Sq.mm armoured Copper cable as per ICF Specification.

Supply & Erection of End termination of UG Al cable 3.5/4 core, upto 50 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply & Erection of End termination of UG Al cable 3.5/4 core, 70/120/185 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply & Erection End termination of UG Al cable 3.5 core, 240/300/400 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply & Erection of End termination of flexible copper cable of size 240 sq.mm with all required items like proper glands and copper crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply of MS hot dip galvanized Cable tray of size 300mm (W) x 2500mm (L) x 100 mm (H), to type no.4 of ICF EL/1236 as per ICF specification.

Fixing and interconnection of Cable Tray of size up to 500mm in walls/pillars and supporting it with proper clamps and hardware as per ICF specification.

Supply, Fabrication, Erection and painting of 50 x50 x 6 MS angles/MS Square Tubes/MS Channels for supporting cable trays and all Types of Electrical Controls Boxes as per ICF Specification.

Supply, installation, testing & commissioning of Sandwich type, 800A bus bar 22 trunking system with Aluminum bus bar, minimum 50kA, for 1 Sec, IP54 min Protection, 415V, plug in bus duct with 100% neutral, 50% integral earth without external earth strip, minimum Class B insulation, 1.6mm thickness electro galvanized sheet steel enclosure, painting, Straight length with 3 tap-off point in a 3mtr length as per specification.(Quote for 1 mtr length) as per ICF specification.

Supply & installation of flange end with cable end box suitable for 800A Bus bar truncking system with aluminum cable glanding as per ICF specification.

Supply of End Cover (suitable for Sandwich type, 800A busbar trunking system with aluminum bus bar) as per ICF Specification.

Supply, Fabrication, Painting and Erection of ISMC 100mm x 75mm, angles and flats of various sizes as per ICF Specification.

Supply, Fabrication, Painting and Erection of ISMC 150mm x 75mm, angles and flats of various sizes as per ICF Specification.

Supply, installation & testing of 125A, TPN tap off box fitted with MCCB+ ROM+ Spreader links trunking suitable for plugging to 800A bus bar trunking system as per ICF Specification

Supply & erection of 3 pole 125 A, MCCB 415 V 36 KA, and 125 A 3P+N+E Three phase De-Contactor Plug & Socket assembled in IP -55 enclosure Box as per ICF Specification.

Supply, installation & testing of 63A, TPN tap off box fitted with MCCB+ ROM+ Spreader links trunking suitable for plugging to 800A bus bar trunking system as per ICF Specification

Supply of 63 A, 415 V, Three phase Modified De- contactor Box with MCB, RCCB and Earth Continuity monitoring circuit as per ICF Specification.

Erection, Testing and Commissioning of 63 A, 415 V, three phase Modified De- contactor Box with MCB, RCCB and Earth Continuity monitoring circuit as per ICF Specification.

Supply of Single Phase, Two Circuits (4 Live conductors) Lighting Bus way 40 Amps, Straight length with Tap-off provision along with blanking plate as per ICF Specification. (Quote for 1 mtr length)

Supply of End Feed units with cover suitable for Lighting Bus Bay 40 amps (4 Conductors) as per ICF specification.

Erection (laying, Fixing, suspension), Testing and Commissioning of Lighting Bus way 40 Amps of Straight length with all accessories like, End feed unit, fixing bracket, Tap-off units, 12mm threaded rod and all other accessories as per ICF Specification.

Supply of 16 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF Specification.

Supply and Erection of 230/ 24 V, 3 kVA safety transformer with fixing frame and required hardware and termination of cables as per ICF Specification.

Supply and Erection of plug and socket box with 3 no's of 24 volts butt type BCH plug and socket controlled with 1 no of 16 A Double pole MCB and 3 no's of 10Amps Double pole MCB in sheet steel enclosure as ICF drawing and as per ICF Specification.

Supply and Erection of 7.5KVA 415/110V Transformer with 32 A DP MCB as Incomer & 125A DP SFU as outgoing mounted in a sheet steel enclosure of 2mm thickness along with fixing stand as per ICF Specification.

Supply of 2 core 16 sq.mm armoured copper cable for incoming to 7.5 KVA transformer as per ICF specification.

Supply of 110 V AC Plug and Socket in Distribution board completely wired and with all accessories similar to KAEDRS Distribution system of M/s. Schnider Electric consisting of the 40 following to ICF Specification:- a)Kaedra Distribution Board similar to Cat No. 13176-1 No. b) Wander Plug 16A, 2P+E, PK ,IP44 similar to Cat No.PKE 16M413-----2Nos. c) Panel Socket 16A, 2P+E, PK,IP67, similar to Cat No.PKF16F413----2Nos d) C60N, 16A, 2P MCB 'C'Curve ----2 Nos. The Cat Nos. referred are of M/s. Schnider Electric as per specification.

Erection of 110V AC plug and socket box as per ICF Specification.

Supply of Control panel for air circulator to ICF drawing no. ICF/EL/1513 Alt 'b' and as per ICF Specification.

Erection of Control panel for Air circulators and as per ICF Specification.

Supply of BLDC Heavy Duty Wall mounting Air circulators of Sweep 24" (600mm) dia as per ICF Specification.

Erection of 600 mm sweep Air circulator with proper framework and termination with 1.5 Sq.mm PVC flexible copper cable run from the control panel as per ICF Specification.

Supply of 18 W (4 feet) LED Tube Light & Batten as per ICF Specification.

Fixing of 18 W LED Tube Light Luminaire & Batten as per ICF Specification.

Supply of 10 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF Specification.

Supply of 150 W LED High Bay Industrial Luminaire Fitting with IP-66 (min) Protection powder coated die - cast aluminum housing with weatherproof gasket for lamp and control gear for Industrial application. (Scope Includes all Accessories as per ICF Specification).

Fixing Testing and Commissioning of 150W LED High Bay Light Fitting in roof with supply and fabrication of suitable bracket in necessary fixing hardware as per ICF Specification.

Supply & erection of 230V AC Socket Box consisting of 2P, MCB 1 No & RCCB (30mA sensitivity) 1 No with 16A Socket as per ICF Specification.

Supply and Erection of Battery Charger with output of 110V DC, 200 amps suitable for working with 415 V, 3 phase Incoming supply as per ICF specification.

Supply and erection of 110 V, DC Plug and Socket in distribution board completely 53 wired and with all accessories consisting of a). 1 no. of Plug & Socket box with SP MCB Cut out (Make BCH: SSEU303-SSC-MCB 1P) b). 1 No of Panel mounting socket (make BCH: 2415B) c). 1 No of Plug with included Handle 9 Make BCH: 215B) d). 1 No of 32 A, SP MCB as per ICF specification.

Supply and Erection of 8"x 4" MS Junction Box with 5 Terminal SMC pad consisting of 5 nos of 6mm studded terminal suitable for 32A amps DC rating as per ICF Specification

Supply and Installation of 2-way Roof Mounted Over Headline Supply indication light Box as per the enclosed ICF specification.

Supply and Running Of 3 runs of PVC, FRLS 1.5 sq.mm copper cable (Red, Black, Green) in 1" PVC conduit/Casing Capping and accessories duly fixing the conduit in wall using hardware. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per specification (One span shall consist of one meter length of 3 runs of single core 1.5 sq.mm cable, PVC pipe, PVC accessories and Hardware etc.,) as per ICF Specification.

Supply and Running Of 2 no's of 2.5 sq.mm PVC, FRLS copper cable and 1 no. of 1.5 sq.mm PVC copper cable in 1" PVC conduit/Casing Capping and accessories duly fixing the conduit in 57 wall using hardware. Contractor scope of supply includes PVC conduit, PVC cable, pvc accessories, hardware etc., as per specification. (One span shall consist of one meter length of 2 runs of single core 2.5 sq.mm & 1 run of 1.5 sq.mm cable, PVC pipe, PVC accessories and Hardware etc.,) as per ICF Specification.

Supply of 45W LED Street light fitting with IP protection as per ICF Specification.

Fixing, Testing & Commissioning of 45W LED Street light fitting as per ICF Specification.

Breaking & Redoing of concrete portion using contractors own materials as per ICF Specification.

Supply, Erection, Testing and Commissioning of Earthing Electrode to Drg No.ICF/EL/1289 inclusive of supply of all reqd. materials like 50 mm dia pipe, copper strip of size 25 x 3 mm, all reqd. hardware and all other materials etc., as per ICF Specification

Supply of 25 x 3 mm GI strip for earthing as per enclosed ICF Specification.

Fixing/Laying of GI strip of size upto 50x6 mm in the trays/ pillars with required GI brackets and GI hardware as per ICF Specification. Brackets and hardware forms contractors' scope of supply.

Supply and laying of 8 SWG Copper wire as per ICF Specification.

Supply of 2 HP Single Phase submersible dewatering pump for pit line as per ICF Specification

Installation of upto 2 HP single phase submersible dewatering pump for pit line as per ICF Specification

Supply of 300 sq.mm 3 core XLPE HT (UE) 11kV, AL, Armoured cable conforming to IS: 7098(latest) as per ICF Specification.

Laying of HT cable up to 300 sq.mm duly excavating and re-filling the trench including supply and filling of coarse river sand with excavated earth as per ICF specification.

Laying of HT XLPE AL cables upto 300 sq.mm in cable trays/ fixing in wall as per ICF specification.

Supply and laying of straight through jointing kits heat shrinkable type suitable for 11kV(UE) 3x300 sq.mm HT cable as per ICF specification.

Supply, erection of outdoor end termination kits suitable for 11kV (UE) 3x300 sq.mm HT XLPE cable as per ICF specification.

Supply of 50 Pair Polythene insulated, Polythene Sheathed, Jelly Filled Armored U.G. 72 Telephone Cable confirming to Specification No. TEC GR NO. GR/CUG -01/ 03. Aug 2003 or Latest. The Cable Shall be of Minimum 500 Mtrs . Of continuous length of and wound on a wooden drum confirming to Specification No. TEC GR. No. G /CBD - 01/ 02 Nov 94.

Supply and mounting of KRONE make 50 pair outdoor connection box with 10 pair LSA Disconnection modules, back mounting frame, lable holder (complete set) as per ICF Specification.

Laying of 50 pair, Armored U.G. Telephone Cable in open trench as per ICF Specification.

Laying of 50 pair, Armored U.G. Telephone Cable in tray as per ICF Specification.

Supply of 5 Pair PVC Switch Board Cable with 0.5mm dia Copper Conductor Conforming to latest TEC Spec. TEC Specn. No.G/WIR-06/02 OF MAY'1994 or latest.

Supply of 6 UTP Cable as per ICF specification.

Supply & installation of 1" Rigid PVC Conduit with all accessories duly inserting the telephone & Cat 6 cable as per ICF Specification.

Supply & installation of Dual I/O Face plate with IO Jack CAT6 as per ICF Specification.

C-Construction of 60x20 M Stores Shed at ICF.

Supply & Erection of 8 way SMDB with incomer of 400A TPN MCCB & Outgoing of 63A-100A TP MCCB with incomer as 400A TPN 36KA Thermal magnetic release MCCB and outgoing 1 as 100A TP 25KA MCCBs along with required metering box fitted with 3 nos 96 x 96 Digital Ammeter for individual phases and 1 no 96x96mm 3 phase Digital Volt meter and 1 No Selector switch and provision of left & right side cable end boxes & 4 nos corner filler boxes and base mounting assembly to be provided at bottom and RYB indication with required CTs and necessary wiring for Meters, Lamps, CTs, Complete set as per ICF specification.

Supply of Two bay lighting and ventilation control cubicle panel including all components like four knife switch isolators, contactors, timer etc., as per ICF drawing ICF/EL-1550 (3 Sheets) and as per ICF specification.

Installation, Testing and commissioning of lighting and ventilation panel with MS channel, grouting bolts and other masonry materials as per ICF Specification.

Supply of outdoor 7way SDB with 250A incomer - 2 Nos. & 125 A outgoing -5 Nos. with DIN type Fuse units as per ICF specification.

Erection of MDB/ SDB on the brick pedestals duly constructing the brick pedestal & connecting all incoming and outgoing U/G cables using proper cable gland, Cr.tmls. & sockets as per ICF specification. (incl. of supply of all Cr. Tml sockets & required hardware etc.,).

Supply of 185 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 35 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification.

Supply of 16 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification

Laying of LT XLPE Aluminium and Copper cables upto 300sq.mm, in cable trays/trenches as per ICF specification.

Supply & laying of 4 core, 10 Sq.mm armoured Copper cable as per ICF Specification.

Supply & Erection of End termination of UG Al cable 3.5/4 core, upto 50 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification.

Supply of Single Phase, Two Circuits (4 Live conductors) Lighting Bus way 40 Amps, Straight length with Tap-off provision along with blanking plate as per ICF Specification. (Quote for 1 mtr length)

Supply of End Feed units with cover suitable for Lighting Bus Bay 40 amps (4 Conductors) as per ICF specification.

Erection (laying, Fixing, suspension), Testing and Commissioning of Lighting Bus way 40 Amps of Straight length with all accessories like, End feed unit, fixing bracket, Tap-off units, 12mm threaded rod and all other accessories as per ICF Specification.

Supply, Fabrication, Painting and Erection of ISMC 150mm x 75mm, angles and flats of various sizes as per ICF Specification.

Supply of 16 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF specification.

Supply of 10 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF Specification.

Supply and Erection of 8"x 4" MS Junction Box with 5 Terminal SMC pad consisting of 5 no's of 6mm studded terminal suitable for 32A amps DC rating as per ICF Specification.

Supply of Control panel for air circulator to ICF drawing no. ICF/EL/1513 Alt 'b' and as per ICF Specification.

Erection of Control panel for Air circulators and as per ICF specification.

Supply of BLDC Heavy Duty Wall mounting Air circulators of Sweep 24" (600mm) dia as per IUCF specification.

Erection of 600 mm sweep Air circulator with proper framework and termination with 1.5 Sq.mm PVC flexible copper cable run from the control panel as per ICF specification.

Supply of 150 W LED High Bay Industrial Luminaire Fitting with IP-66 (min) Protection powder coated die - cast aluminium housing with weatherproof gasket for lamp and control gear for Industrial application. (Scope Includes all Accessories as per ICF Specification).

Fixing Testing and Commissioning of 150W LED High Bay Light Fitting in roof with supply and fabrication of suitable bracket in necessary fixing hardware as per ICF Specification.

Supply of 18 W (4 feet) LED Tube Light & Batten as per ICF Specification.

Fixing of 18 W LED Tube Light Luminaire & Batten as per ICF Specification.

Supply and erection of 36W, 2x2 feet LED slim type square light fitting with all required fixing materials as per ICF Specification.

Supply of 45W LED Street light fitting with IP protection as per ICF Specification.

Fixing, Testing & Commissioning of 45W LED Street light fitting as per ICF Specification.

Supply, Erection, Testing and Commissioning of Earthing Electrode to Drg No.ICF/EL/1289 inclusive of supply of all reqd. materials like 50 mm dia pipe, copper strip of size 25 x 3 mm, all reqd. hardware and all other materials etc., as per ICF Specification

Supply and laying of 8 SWG Copper wire as per ICF Specification.

Supply of 50 Pair Polythene insulated , Polythene Sheathed , Jelly Filled Armored U.G. Telephone Cable confirming to Specification No. TEC GR NO. GR/CUG -01/ 03. Aug 2003 or Latest . The Cable Shall be of Minimum 500 Mtrs . Of continuous length of and wound on a wooden drum confirming to Specification No. TEC GR .No. G /CBD - 01/ 02 Nov 94.

Supply and mounting of KRONE make 50 pair outdoor connection box with 10 pair LSA Disconnection modules, back mounting frame, lable holder (complete set) as per ICF Specification.

Laying of 50 pair, Armored U.G. Telephone Cable in tray as per ICF Specification.

Supply of 5 Pair PVC Switch Board Cable with 0.5mm dia Copper Conductor Conforming to latest TEC Spec. TEC Specn.No.G/WIR-06/02 OF MAY'1994 or latest.

Supply of 6 UTP Cable as per ICF Specification.

Supply & installation of 1" Rigid PVC Conduit with all accessories duly inserting the telephone & Cat 6 cable as per ICF Specification.

Supply & installation of Dual I/O Face plate with IO Jack CAT6 as per ICF Specification.