Cha/AD19-20/07 Construction of approach road to Chalapather Shyam Gaon Buddhist Monastery (Ch.5950.00 m to Ch.6710.00 m)

Amount

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thick ness as per Technical Specification Clause 201.0 i) By Manual Means A) In area of non-thorny jungle

Scarifying Existing Bituminous Surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 m as per technical specification clause 305.4.3

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compaction to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5. (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compaction with smooth wheel roller to achieve the desired density, complete as per technical Specification Clause 401. ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compaction to the required density as per Technical Specification Clause 405. B) With Gr. III metal

Providing & laying inter locking concrete block pavement( M-30) having thickness 80 mm including construction of edge restrain as per technical specification clouse 1504.

Providing & laying inter locking concrete block pavement( M-30) having thickness 80 mm including construction of edge restrain as per technical specification clouse 1504. (Coloured Paver Block)

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. II) Ordinary Kilometer stone (Precast)

III) Hectometer stone (Precast)

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 ii) 60cm equilateral traingle

iii) 60cm circular

v) 80cmm x 60 cm rectangular

Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos. firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand)

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Providing of 15 Nos. Rumble(for cach location) strips covered with premix bituminous carpet 15.2 mm high at centre ,250mm wide placed at 1.00m centre to centre at approved location to control speed marked with white strips of road marker paint.

Providing and fixing of Guard Post

Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for three year.

Covered waiting Shade at bus stopage Earthwork in excavation for foundation trenches of walls, retaining walls, footing of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling dressing watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classificatrion of soils including bailing out water where necessary as directed and specified (A) Up to a depth of 2.00 m below the existingground soil (a) In ordinary soil Footing

Providing soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete (a) Brick on flat soling

PLAIN CEMENT CONCRETE WORKS Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately) In prop 1 cement 3 sand 6 coarse aggregate by volume

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work /R.B. walling including straightening, clearing, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (No extra measurement for lap, hook, chair anchor etc. will be entertained in the measurement as they are included in the rate) Upo to 1st floor level) a) From Primary Producer TATA/SAIL/Esser Steel/jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement

Providing from work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation, footing bases of colums pile cap, raft and mass concrete works etc. (b) Using 25 mm thick plank

Sides of tie beams, grade beams etc. at or below ground level (b) Using 25mm thick plank For Tie Beam

Columns, Pillars, Posts & Strut

Flate Surfaces such as soffits of suspended floors, roofs, landings, canteeleveer slabs, chajjas, balconies and the like (a) Floors etc. upto 200 mm in thickness (ii) Using 25 mm thick plank

REINFORCED CEMENT CONCRETE WORKS Plain/reinforced cement concrete worsk cement coarse sand & 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of forms work and reinforcedment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to Plinth level Without using admixture, plasticiser M20 grade concrete or prop.1:1:5:3 Tie Beam

(B) In super structure from plinth level up to 1st floor level ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill ban beam girder bressumer, cantilever, staircase (except spiral staircase and landing) including pereparing the top surface and finshing of nosing N) Without using admixture, plasticiser B) M 20 grade concrete or Prop. 1:1:5:3

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties ans taxes as may be necessary (c) With river sand or silt (Predominantly non plastic) by truck carriage including loading and unloading

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1:5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed (I) In Sub-structure upto plinth level including dewatering if necessary (b) In Proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (Protruding MS rod/Tor steel---------- (A) 112 mm thick brick wall (a) In cement mortar in proportion 1:4 (1 cement: 4 sand)

Providing wood work in frame (Chowkaths) of doors, windows clerestory windows and other similar works wrought, framed and fixed in position in contact with CC or brick masonry wall including supplying fitting and fixing with MS hold fast (40 mm x 3mm x 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with coats of kircide oiling to the timber faces in contact with C.C. and nasonry as directed (b) With 1st class timber (Bonsum/Sundi)

10mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80 mm girth and finished even and smooth including curing complete as directed b) In cement mortar 1:4 celling for GF and FF

15 m thick cement plaster in single coat on single or half brick wall for interiror plastering up to 1st floor levels including ariese, internal rounded angles, not exceeding 80 mm girth and finished aven and smooth including curing complete as directed A) On rough side b) In cement mortar 1:4

B) On fair side b) In cement mortar 1:4

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. Of size 13 mm ton 32mm including dewatering if necessary, and curing etc. complete b) 50 mm thick

providing vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1 cement :3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department c) Delux range Somany/Orient/Nitco/Varmora/VITA/Marbito/Make ii) of Size 1200 mm x 1600mm and above

Providing and laying machine made clay roof tiles on sloping roof and Chajjas over roof tiles on sloping roof and chajjas over 20 mm thick base of cement mortar 1:3 and joined with grey cement slurry and joints flush with mortar 1:3 complete

Cheqered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster inproportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shaders (a) Using white Apron

CEMENT PAINT &PRIMER A) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth

SPECIAL WATHER PROOF COLOURING Finishing old/new wall with water proofing weather coat smooth antifungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two Coats)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J & N paint/Nerolac) to give ab even shade including cleaning the surface of all dirt, dustr and other foreign matter sand papering and stopping (i) Surface over 100 mm in width or girth

Providing fitting and fixing M.S round bars with M.S flat stiffeners at required spacing in wooden frames of windows and clerestory windows © Fixed to Brickwork/PCC/RCC

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved manufacture (Asian paint/Berger paint/ICI paint/N & N paint Nerolac) to give and even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surface over 100 mm in width or girth a) General Purpose (Asian paint/Berger paint/ICI paint/J7N paint /Nerolac) Grill Place

Cost for foundation stome laying and Inauguration ceremony Earth work in excavation for structures as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, remocal of stumps and other deleterious mateial and disposal upto a lead of 50 m dressing of sides and bottom and backfilling in trenches with excavated suitable material I. In odinary soil, depth upto 3.0 m

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 A. With crushed stone I. PCC nominal Mix 1:3:6 (Hand mixing)

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 ii) Brick masonry in 1:4 cement mortar

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 ii) Brick masonry in 1:4 cement mortar

Painting on concrete surface (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. )

Providing black colour granite plate of size 1067 mm x 762 mm (3'6" x2'6") with golden coloured lettering, boundary and logo of required size and numbers in grove as desired by the department.

Providing pandel of size 60' x 40' with dias arrangement of table & VIP chair 10 (ten) nos. and plastic chair 200nos. Electric generator temporary arrangement of fan and lighting, sond system etc. as desired by the department required for Foundation stone Laying Ceremony By VIP within the Charaideo district

Supplying sweets, snacks in packet and tea, packaged drinking water with necessary arrangement of cups, plates, glasses etc.

Internal electrification works (CiviL) Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.Short point up to 3.00 metre. length.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point up to 3.00 metre. length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 12 way SPN single door

Routine Maintenance after completion of the work for the work for 1st year

Routine Maintenance after completion of the work for the work for 2nd year

Routine Maintenance after completion of the work for the work for 3rd year

Prosanta Boruah

RITUPON BOKAL