Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹31.0 Laccepted-finance | ₹31.0 L | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹62,710
Closing Date
18 May 2026, 9:30 pmClosed
Bangalore Electricity Supply Company Limited
Kavitha R
Providing Interior works with connected electrical work by dismantling existing wall panelling & ceiling at Ground floor of Block-I building corporate office BESCOM
BESCOM/2026-27/BD/WORK_INDENT1080
BESCOM/2026-27/BD/WORK_INDENT1080
Open
Buildings
Two Tender Document System(Two Cover)
BESCOM Corporate Office Civil Section Bengaluru
8 documents required · 7 mandatory · 1 optional
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
The bidders shall upload the work done certificate for having executed One building renovation work of value not less than Rs. 15.68 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., F/Y 2021-22 to 2025-26). Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent. (Note: Work done amount will be updated to the FY 2026-27 in which the tenders are invited. The value of the completed works will be given a weight of 10% per year to bring them to the price level of the FY 2026-27 in which the tenders are invited)
The bidders shall upload a valid registered KPWD Civil contractor Licence of Class III and above.
The bidders shall achieved turnover for an amount not less than Rs.31.36 lakhs achieved in any two financial years in the past 5 years (i.e. F/Y 2021-22 to 2025-26) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e. F/Y 2021-22 to 2025-26) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN and UDIN number must be mentioned failing which bid will be considered as Non-Responsive) should be uploaded. (Note: The turnover amount will be updated to the FY 2026-27 in which the tenders are invited. The Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2026-27 in which the tenders are invited).
The bidder/tenderer or his identified Sub contractor should upload required valid electrical licence along with consent / undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs.3.34 lakhs in any one year in the last 5 years, (i.e. F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Electrical works.
The banker certificate pertaining to Liquid Assets for availability of fund requirement for the work not less Rs.31.36 Lakhs issued by Nationalised / Scheduled Bank for the subject work addressed to General Manager (Civil), Corporate office, BESCOM after 30.04.2026 in the enclosed format.
Bidder shall upload the self-declaration affidavit as per the enclosed format on the stamp paper of value not less than Rs. 500/- duly notarized stating that a.Not made any misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements. b. Not made any Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion or financial failures etc. c. Not participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. d. No Litigation History or arbitration arising out of contracts completed or under execution by it over the preceding five years.
Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder should calculate and upload available tender capacity as per the formula : Assessed available tender capacity equals (AXNX2.5-B)
₹790
₹62,710
8 May 2026
8 May 2026
19 May 2026
13 May 2026
Providing Interior works with connected electrical work by dismantling existing wall panelling & ceiling at Ground floor of Block-I building corporate office BESCOM
Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of sec...
Dismantling tile work in floors and roofs laid in cement mortar include ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles above 25 m...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...
Providing and Fixing Vox 12 mm thick Louvered Panel cladding with 12 mmm ply back supports
Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over...
Providing and Fixing wall paper with addesive backing including finishing of wall with one coat primer as per engineer in charge in site
Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
STORAGE UNITS.Providing and fixing storage unit made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Approved make and s...
Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System bin module size of 600 x 600 x 16mm with Exposed Grid for Hospitals, bShopping malls, Commercial establishments and office compl...
Providing and fixing Baffle ceiling including cost of materials, labor, usage charges of machinery complete as per the directions of the Engineer in charge
GYPSUM CEILING.Providing and fixing Gypsum false ceiling as per India Gypsum specification for ceiling with drops as per drawing including of providing and fixing G.I. Frame work as per specification ...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing Toughened glass 12 mm thickness with hole partition of approved brand and manufacture including cost of materials, labour, usage charges of machinery complete as per engineer In charge.
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...
Providing and fixing the Toughned glass door lock at the bottom of the Door including materials, labour and any other material required to provide locking arrangement
Providing and fixing the Toughned glass door handle set with vertical tube 0.60m height with horizontal tube fixed to glass door including materials, labour and any other material
Providing and laying Gypsum panel partitions 100 mm thick with waterproof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plast...
Aluminium fluted strips 3.15 mm thick.150 mm wide.
Providing and Laying Froasted sticker and windows including cost of materials, labour, usage charges of machinery complete as per engineer In charge.
Providing and Laying LG Stickers on the glass door including cost of materials, labour, usage charges of machinery complete as per engineer In charge.
Providing and laying the line daigram of required photo glass doors including cost of materials, labour, usage charges of machinery complete as per engineer In charge.
Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS 2509 with suitable size bends ,junction boxes, adhesive paste etc, and fixing using inverted wood plugs incase of RCC c...
B)25 mm dia 2 mm thick.
Supplying PVC/GI flexible conduit pipe....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using ...
Point wiring using copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.55qmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi st...
B) Medium point above 3 Mtr upto 6 Mtr from tapping point to out let via switch.
C) Long point above 6 Mtr upto 10 Mtr from tapping point toout let via switch.
Wiring for lighting / power circuit using one of FRLS PVC insulated 1100Vgrade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary rawl plugs Machine/ NF...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.complete on the existing met...
C) 10-12 Module.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One Way Switch.
B)6/16A Universal Socket.
2mm thick perforated cable GI tray with on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required.450 x 50 mm.
2mm thick perforated cable GI tray with on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required. 150 x 50 mm.
Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the eart...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip.
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439-3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitabl...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15 inch Sweep (450 mm).
Supplying and drawing UTP-CAT 6E LAN cable.
Supplying & fixing of I/O socket with back box. Single I/O.
Supplying fixing of Network Switches. 24 port 10/100/1000 Switch.
Supplying fixing of Network Switches. 8 port 10/100 Switch.
Supplying & Fixing of switch mounting rack with power manager & Cable manager. 9U with 450mm dept.
Supplying & Fixing of Patch panel for LAN cabling.24 Port 10/100/1000 patch panel.
Supplying & Fixing of... ms Cat 6 Patch Cable. 1 m.
Supplying & Fixing of Power strip.
Supplying & Fixing of Fan.
Supply of round/square recess/surface mounted rolling type LED Down light with......W GU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated pre wired to mains connector & has sw...
Supplying of recess mounting non integral type LED W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps Power LED swith CCT 6500 degree K, CRI ...
Supplying & fixing flexible LED Strip Light W Power consumption in 5 mis length CCT6500 degree K. CRIgreater than 70%, efficacy greater than80 lumen per W, life 25000 burning hours and Compliance to I...
Fixing all types and all capacities of fluorescent/falsec on the eiling/spotlight/CFL/LED fittings indoor wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos o...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A. Ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
Supply, Installation & Commissioning of lighting control automation Single switch plate with built in wireless communication Product Features
Smart switches will be available to fit into standard 2mod...
Supply, Installation & Commissioning of lighting control automation Single switch plate with built in wireless communication Product Features
Smart switches will be available to fit into standard 2mod...
Supply,Installation & Commissioning of lighting control automation Wired PIR Motion Sensor PI R sensors shall be deployed for on demand lighting/electric requirement PIR sensor directly activates/deac...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Banker Certificate Format.pdf
Others - Banker Certificate format • 0.02 MB
KW2 Block I Renovation.docx
Tender Document • 0.54 MB
Self declaration format.docx
Others - Self declaration format • 0.01 MB
NIT Block I renovation.docx
Instructions to Tenderers • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .