PROPOSED CONSTRUCTION OF VEGETABLE MARKET (SANNA MARKET) AT BALLARY CITY

PROPOSED CONSTRUCTION OF VEGETABLE MARKET (SANNA MARKET) AT BALLARY CITY

Earth work in surface excavation by mechanical means for lowering leveling the ground for all works other than foundation in all kinds of soils upto depth not exceeding 300mm as per drawing and tech...

Providing and injecting chemical emulsion for Preconstructional AntiTermite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top surfa...

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights in...

Provding and filling in plinth with granite trap broken metal 100mm and down size with aprroved sand including hand packing watering including cost of all materials and Labour with all lead and lift ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing Coursed rubble masonry first sort with hard stone in foundation and plinth with Cement mortar 16 1 cement 6 coarse sand CSR 202324 Volume2 sl.no5.2 P.no 9

Providing Size Stone masonry with hard stone in foundation plinth with Cement mortar 16 1 cement 6 coarse sandCSR 202324 Volume2 sl.no5.4

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by rammin...

Construction of Embankment by excavating the available approved GravelMurrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading gr...

FootingProviding and laying in position Reinforced cement concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...

Additionalities for Formwork Centering Scaffolding 8 for footings CSR 202324 Addendum I P no 111

ColumnsProviding and laying in position Reinforced cement concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...

Additionalities for Formwork Centering Scaffolding 70 for Columns CSR 202324 Addendum I P no 111

Plinth BeamProviding and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc. The granitetrapbasalt crushed graded coarse aggr...

Additionalities for Formwork Centering Scaffolding 50 for Beam CSR 202324 Addendum I P no 111

Columns Above PlinthProviding and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works super structure works of bridges upto 3.5...

Additionalities for Formwork Centering Scaffolding 70 for Columns CSR 202324 Addendum I P no 111

BeamLintel RoofProviding and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works super structure works of bridges upto 3.50 m ...

Additionalities for Formwork Centering Scaffolding 60 for Beam Lintel CSR 202324 Addendum I P no 111

Additionalities for Formwork Centering Scaffolding 50 for Roof slab Staircase CSR 202324 Addendum I P no 111

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Additionalities for Formwork Centering Scaffolding 60 for Beam Lintel CSR 202324 Addendum I P no 111

Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bindi...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 16 1 cement 6 coarse sand includi...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 13 1 cement 3 coarse sand including cost of all materials la...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of Tiron 40x40x6 mm with 40 mm ...

Supplying and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on special...

Extra for providing Manually operated Bevel Gear Box for operating rolling

shutters including cost of materials labour usage charges of machinery

complete as per specifications and as per directions o...

Providing fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel ...

Providing 12 mm cement plaster with cement mortar 16 1 cement 6 fine sand including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materia...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar ...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 16 1 cement 6 fine sand including rounding off corners wherever required smooth rendering providing and removing sc...

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer after thoro...

Finishing walls with water proofing cement paint of required shade New work Two coats applied @ 4.84 kg10 m² to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar...

Finishing walls with textured exterior paint of required shade New work Two coats applied @ 3.28 ltr10 m² over and including priming coat of exterior primer applied @ 2.20kg10 m² to give an even sha...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and foreig...

Providing and laying Polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm...

Providing edge moulding to 18mm thick Granite stone counters vanitiesetc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerincharge CSR 2023...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural dr...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 124 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal siz...

Providing skirting dadooing rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 13 and jointed with white cement slurry over existing rough plaster surface using glazed tiles...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing balcony railing staircase railing and similar works including applying priming coat of approved steel primer. M....

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights in...

Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m. ...

Providing and fixing brass bib cock of approved quality 20 mm nominal bore Common 20232024 PWD SR Vol2 Sl No. 13.32.2 P.No117

Providing and fixing PTMT push cock of approved quality and colour. 15 mm nominal bore 80 mm long weighing not less than 46 g Common 20232024 PWD SR Vol2 Sl No. 13.21.2 P.No120

Providing and fixing brass stop cock of approved quality 20mm dia nominal Common 20232024 PWD SR Vol2 Sl No. 13.3.2 P.No117

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 40mm dia nominalCommon 20232024 PWD SR Vol2 Sl No. 13.4.3 P.No117

PROPOSED CONSTRUCTION OF VEGETABLE MARKET (SANNA MARKET) AT BALLARY CITY

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 50mm dia nominalCommon 20232024 PWD SR Vol2 Sl No. 13.4.4 P.No118

Providing and fixing ball valve brass of approved quality High or low pressure with plastic floats complete Common 20232024 PWD SR Vol2 Sl No. 13.5.2 P.No11720mm dia nominal

Providing and fixing ball valve brass of approved quality High or low pressure with plastic floats complete Common 20232024 PWD SR Vol2 Sl No. 13.5.3 P.No11725mm dia nominal

Providing and fixing gun metal non return valve of approved quality screwed end Common 20232024 PWD SR Vol2 Sl No. 13.6.1.1 P.No11725mm dia nominal

Providing and fixing gun metal non return valve of approved quality screwed end Common 20232024 PWD SR Vol2 Sl No. 13.6.2.1 P.No11832mm dia nominal

Providing and fixing unplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore Common 20232024 PWD SR Vol2 Sl No. 13.8.1.1 P.No118

Providing and fixing chorinated poly veny chloride CPVC pipes having therminal stability for hot cold water supply including all cPVC plain and brass threaded fittings ic fixing the pipe with clamps...

Providing and fixing chorinated poly veny chloride CPVC pipes having therminal stability for hot cold water supply including all cPVC plain and brass threaded fittings ic fixing the pipe with clamps...

Providing and fixing chorinated poly veny chloride CPVC pipes having therminal stability for hot cold water supply including all cPVC plain and brass threaded fittings ic fixing the pipe with clamps...

Providing and fixing chorinated poly veny chloride CPVC pipes having therminal stability for hot cold water supply including all cPVC plain and brass threaded fittings including fixing the pipe with...

Providing and fixing chorinated poly veny chloride CPVC pipes having therminal stability for hot cold water supply including all cPVC plain and brass threaded fittings including fixing the pipe with...

Providing and fixing chorinated poly veny chloride CPVC pipes having therminal stability for hot cold water supply including all cPVC plain and brass threaded fittings. This includes jointing of pip...

Providing and fixing M.S. clamp of required dia to the top of casing housing pipe of tubewell as per IS 2800 part I including necessary bolts nuts of required size complete.Building 20232024 PWD SR...

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointimg with seal ring conforming to IS 5382 leaving 10mm gap for termal expansion i...

Supplying laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ro...

Supplying laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ro...

Supplying lowering laying jointing testing and commissioning of Glazed Stone Ware Pipes of following dia conforming to IS 6511992 IS 4127 with latest amendments including conveying to work site caulki...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 14 1 cement 4 coarse sand C.I. cover with frame light duty 455x610 mm internal dimens...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 14 1 cement 4 coarse sand C.I. cover with frame light duty 500X700 mm internal dimens...

Construction of RCC Machinehole chambers of 11.53 proportion or approved type Castinsitu Precast RCC Machinehole chambers constructed using form vibrators of standard type with barricading danger lig...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ro...

CI Nahani trap Building 20232024 PWD SR Vol2 Sl No.547 P.No.A28

Providing and placing on terraceat all floor levels polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S by vertical electrical sounding by adopting Venner ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and cap...

Supplying PVC ringtite pipes conforming to IS 49852000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints t...

Providing and fixing MS casing collars as per IS 1239 partII 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum. The dimensions o...

Providing and laying at site of work MS casing caps as per IS 1239 partII 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum. Th...

Providingsupplying to work site Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 80342000;3Phase SS Bowl Impeller with Low volt Motor as per specificationsas per necessar...

Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Voltm...

Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...

Supply and delivery at site wrought middle steel galvanized GI elbow confirming to IS 1239II 1991 with latest amendments if any forFor 40 mm dia GI elbow. CSR 20232024 Vol5 Sl No.11.7.5 P no 129

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to1381301984 and virgin ...

Labour charges for Erection Electrification and commissioning of Pumpsets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps c...

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. CSR 20232024 Vol...

Labour charges for erection of indoor type panel board and meter boardunits with all necessary materials and labour tools and equipments including cement concrete for foundationbed etccomplete as per...

Earthing Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bendsmetalPVC junction boxes adhesive paste etc. and running before concreting the slab. The conduit...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bendsmetalPVC junction boxes adhesive paste etc. and running before concreting the slab. The conduit ...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bendsmetalPVC junction boxes adhesive paste etc. and running before concreting the slab. The conduit ...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bendsmetalPVC junction boxes adhesive paste etc. and running before concreting the slab. The conduit ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc. 75x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc. 100x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc. 135x75x65 mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc. 180X90X65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc. 200x90x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc. 200x200x65mm

PROPOSED CONSTRUCTION OF VEGETABLE MARKET (SANNA MARKET) AT BALLARY CITY

Supplying and fixing PVC/metal conduit Deep junction box 25mm Deep Junction Box 19/20mm Deep Junction Box

Supplying and fixing PVC/metal conduit Deep junction box 25mm Deep Junction 25mm Deep Junction Box

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm Conduit in Brick Walls upto 50m...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. ...

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. ...

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket 6A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket 6Amps two way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket 6Amps SOKET

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket 16Amps one way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket 32Amps DP switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket 6/16Amps universal socket

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts,50Hz AC supply & completely wired on existing box.

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with I...

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit s...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 sqmm to 75 sqmm

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Refilling available earth around trenches/pipelines, cables in layers not

exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5 ...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm Up to 4C x 50 Sqmm

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C.

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 250A

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 115A

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breakingcap...