Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.1 LAccepted-AOC | L1 | Accepted-AOC Low Value | |
| 2 | L2₹12.2 L+₹8,949 (0.74%)Rejected-Finance | L2 | Rejected-Finance High Value |
Tender Value
₹14.5 L
EMD Value
₹14,500
Closing Date
11 Sept 2023, 3:00 pmClosed
Executive Officer,
Town panchayat Offce, 14/150 Kasthooribai Gramam., Theroor
Dismantling and Construction of Anganwadi centre at Sethulekshmi Maharanipuram in Theroor town panchayat
2023_DTP_363059_1
176/2023/A1
Open Tender
Civil Works
Works
180 days
Town Panchayat Office, Theroor
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹14,500
Yes
Town Panchayat Office, Theroor
15 Sept 2023
24 Aug 2023
11 Sept 2023
24 Aug 2023
11 Sept 2023
24 Aug 2023
31 Aug 2023
Amount
Dismantling of Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks including all labour charges etc. complete.
Dismantling of Random rubble masonry in c.m 1:5 (one cement five Sand) using best new rough and bond stones including all labour charges etc. complete.
Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification
Plain Cement Concrete 1:4:8 (One Cement, Four Sand and Eight aggregate) mix using 40mm ISS HBG metal including cost and conveyance and all labour charges etc. complete.
Random rubble masonry in c.m 1:5 (one cement five sand) using best new rough and bond stones including simultaneous pointing above ground level with the same mortor andcost of all materials and labour charges etc,complete as per SS.
Rough stone dry Packing for aprons and revetments using rough stone including cost of all materials and labour charges etc,complete as per SS. No: 217.
Supplying and errecting Steel Shuttering including necessary supports for plane sufaces in foundation and in all floors for RCC Plinth Beams , using mild steel sheets of suitable size 90cm x 60cm and 10 gauge stiffened with including all labour charges etc., complete. (Plain surface)
Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification (RCC work)
R.C.C.1:1 1/2:3 mix using 20mm ISS HBG metal including Cost and conveyance and all labour charges for mixing laying finishing and curing etc complete but excluding cost of steel & Centering charges etc., complete as per SS
Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of II class chamber bricks of size (8 3/4"x41/4"x 23/4" ) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Supply and fabricating and placing in position of steel Reinforcement using Mild steel of Ribbed tor steel rods for all RCC works as per the design given by the department officers including cost of steel and binding wire and all labour charges for cutting bending and tying and placing in position etc., complete as per SS
Special Ceiling Plastering with cm 1:3 mix (One Cement and Three Sand), 10mm thick including concrete surface cleaning, finishing, curing and all labour charges etc complete as per standard specification.
Plastering with cm 1:4 mix (One Cement and Five Sand), 12mm thick cost and conveyance of all materials finishing, curing and all labour charges etc complete as per standard specification.
Special Ceiling Plastering with cm 1:3 mix (One Cement and Three Sand), 20mm thick including concrete surface cleaning, finishing, curing and all labour charges etc complete as per standard specification.
Granolithic Floor finishing with Cement Concrete 1:2:4 (One part of cement, two parts of sand and four parts of ISS HBG metal) mix using 10mm to 12mm ISS size HBG metal to 25mm thick including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:39-F (20mm thick)
Supply and fixing of steel door, ventilator and window including cost and conveyance and all labour charges etc. complete.
Paving the floor with Plain/Design Ceramic tiles ( Colour and shade as directed ) of Vitrified Tiles of size 600 x 600 x 8mm in all floors over a base layer of cm 1:3 mix 20mm thick laid in situ and pointed with same coloured cement ( white cement mixed with colouring pigment ) neatly and fixed in position so as to make it perfectly smooth and shining,to the alignment etc.complete complying with standared specifications and as directed by the departmental officers. The sample colour and shade of the ceramic tiles should be got approved from the departmental officers before use in the works
Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)
Floor Finishing First Quality Design Ceramic tiles of All colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete
Dadooing with glazed tiles of 300mm*200mm*6mm size of approved quality and colour set in c.m 1:2mix (one cement and two sand) 10 mm thick and pointing with white cement using 0.4 kg /m2 neatly as directed -including cost of all materials and labour charges etc complete as per SS
Supplying & Fixing in position of white glazed Indian type water closet with 'P' (or) 'S' trap and Orissa slope set in brick jelly cement concrete 1:4:8 100mm thick using 20mm thick brick jelly ISS gauge and finished to sludge out any leakage and defalut including cost of WC 'P' (or) 'S' trap and foot rest etc., complete
Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works).
Supply and fixing of RCC precast slab in cement concrete 1:2:4 mix ( One cement two sand four aggregate ) using 20mm ISS metal including cost of moulding charges mixing laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but excluding cost of rein forcement (75mm thick)
Supplying and laying Cement concrete Rubber Moulded Hydraulic Pressed Paver Block M40 grade of 80mm thick high strength type confirming IS 15658-2007 of required size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers, sweeping, transporting loading and unloading of paver block as per the standard specification.
Wiring with 2x1.5 sqmm PVC unsheathed Sc. Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch in fush with wall with 3mm thick hylum sheet cover for making good of the coneal3ed portion with suitable colour for PVC concealed light point (For electronic regulator). (SD 24)
Wiring with 2 x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, wtih 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD 38)
Supply and fixing of 1200mm (48'') sweep AC ceiling fan complete with stepped electronic 300w regulator with one metre down rod on the existing clamp (SD.107)
Supply and fixing of single box type 4'40w flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting.(SD.88)
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. (SD-83)
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. (500 litre)
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable gauge M.S. conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD-42)
Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing (SD-143)
Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD-125)
White Porcelin Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe and 32mm dia C.P. waste coupling. (PWD schedule of rate 2023-2024)
Supply and delviery of following PVC / G.I pipes and specials
20mm Tap
63mm PVC pipe
63mm PVC elbow
110mm PVC pipe
110mm PVC elbow
110mm x 63mm PVC reducer
Supply and fixing of 0.5 H.P Mono block motor including fixing charges etc. complete.
Supply and fixing of Granite slabs (Super fine polished with machine cut edges) of sizes 4'x2' and above 18mm to 20mm thick. laid over a base layer of cement mortar 1:3mix 20mm thick and pointed with white cement and pigment of suit the colour of stones and polished neatly as directed by departmental officers.
Providing Letter writing and Scheme details including all labour charges etc. complete.
Provision for Drawing work & Painting pictures including cost and conveyance and all labour charges etc. complete.
CHANDRA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .