CA NO. GE AF NO.1/GUR-56/2023-24 REPAIR TO DOORS WINDOWS, KITCHEN CUPBOARD, MS RAILING, INTERNAL WATER SUPPLY AND SANITARY FITTING TO CERTAIN BUILDING OF SEKHON VIHAR AREA AT AF STN PALAM UNDER GE ( AF) GURGAON NO 1.

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed.

Ditto but exceeding 1.50 sqm each and n.exc. 4 Sqm each complete all as specified and as directed.

Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed.

S&F 25 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both the faces complete all as specified and as directed.

S&F 35mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both the faces complete all as specified and as directed.

S&F anodised aluminium window in repairs with sliding shutters /fixed type with section of 16 guage including necessary jointing cleats, glazing clips, rubbers packing anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete all as specified and directed by Engineer-in-Charge.

S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members,Make:-Rajshri,Sintex or Equivalent.

S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.

S&F in repair 18/19 mm thick prelaminated particle board interior gde prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed.

S&F 2nd class hard wood plain fillets not exc 3 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails complete all as specified and as directed.

S&F in repairs 100 mm long,designer pattern ss handles for fixing in cupboards all as directed and as specified by Engr-in Charge

S&F in repair, Magnet catch for fixing in cup board complete all as specified and as directed.

S&F in repairs, 75 mm long aluminium alloy butt hinges complete all as specified and as directed by Engr-in-Charge

Taking down old Aluminum windows of any description size not exc. 2.50 sqm and M&L for complete overhauling of the glass pane/rubber beeding/aluminum glazing clip if necessary/locking system incl.necessary roiling and adjustment etc and refixing in same location complete all asspecified and directed. Note :- Glass Pane/rubberbeeding/aluminum beeding will be measured and paid separately under subsequent items.

S & F in repair rubber beeding to be fixed over glass panes in Aluminum widows complete all as specified and as directed.

S&F in repair, aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete all as specified and as directed.

Dismantling structural steel work incl. steel door,gate,window guard bars,grills etc. complete all as specified and as directed.

M&L fabricated MS frame work as in doors of gate of angle iron or other section with gusset plate rails, braces etc. complete drilled for fixing steel sheeting or other covering door etc to be prepared for hanging with and including hinges complete all as specified and as directed.

M&L for mild steel works as in grills and railing of Fe-410-0or Fe 310-0, complete all as specified and as directed by Engr-in-charge

M&L PCC for 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching & for fixing railing, holdfast etc complete all as specified and as directed.

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and as directed.

S&F Sheet Glass ordinary 4.0mm thick, fixing to Aluminium Sections as in Panel of Doors, Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc., as required/ordered at Site(s), complete and fixed repairs complete all as specified and as directed.

S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/woodem/steel beads complete all as specified and as directed.

S&F MS medium weight cold rolled butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and as directed.

S&F in repairs, MS Helical door spring 300 mm long complete all as specified and as directed by Engr in Charge(Note:-Helical spring will be fixed by welding)

S&F stainless steel medium weight butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and as directed.

S&F extruded anodised aluminum alloy handle 150mm long fabricated type complete all as specified and as directed.

S&F anodised aluminum barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section and all as specified

S&F in repair telescopic drawer channel 18" long complete all as specified and directed by Engr in charge

S & F in repair floor door stopper of size 75/140 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to door complete all as specified and as directed.

S&F in repairs 25mm dia stainless steel curtain rods including cutting and fixing complete all as specified and as directed by Engr-in-Charge

S& F in repairs designer pattern wall bracket suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge

S& F in repairs designer pattern side knobs suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge

M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified.

M&L preparation of new or previously steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and as directed.

S&F in repairs aluminum door seal fixed to bottom of door shutters complete all as specified and as directed.

S&F in repair (HDPE) water storage LOFT Tank 200 Ltrs capacity in kitchen, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unservicable Water Storage Tank with Float valve of any description complete all as specified and as directed by Engineer-in-Charge (Make Sintex)

S&F repairs brass phase with washer including removing old unserviceable phase complete suitable for 15mm bore bib tab/stop cock complete all as specified and as directed.

S&F repairs brass phase with washer including removing old unserviceable phase complete suitable for 15mm bore Piller tab/Mixer Valves complete all as specified and as directed..

S&F in repair health fauset with double lock 1 meter brass plated stasinless steel flexible hose and wall hook complete all as sspecified and as directed. Make Jaquar, Cat Part No 563 or equivalent out of make specified in list of make.

S&F in repair, High pressure connection pipes 18" long with chrome plated Checknut, all as specified and directed by Engr-in-charge. Cat No-AE-06 of Make-nixo/Shakti or equivalent out of makes specified in list of makes.

S&F in repair, High pressure connection pipes 24" long with chrome plated checknut, all as specified and directed by Engr-in-charge. Cat No-AE-06 of Make-nixo/Shakti or equivalent out of makes specified in list of makes.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc., complete all as specified and as directed.

S&F of SDR-11 CPVC pipe 20 mm dia fixed to concealed in wall ceilling,laid in floor etc incl all fittings and jointing with solvant and brass threaded fittings for fixing taps and valves etc and other situation including Taking up or down unserviceable Steel Water Tubing 15mm bore with Fittings and Connections, etc., complete all as specified and as directed.

S&F for Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore and fixed as in repair complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Gun metal globe or gate valves with half turn lever, screwed both ends for iron pipe 20 mm bore and fixed complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Gun metal globe or gate valves with half turn lever, screwed both ends for iron pipe 25 mm bore and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Gun metal globe or gate valves with half turn lever, screwed both ends for iron pipe 32 mm bore and fixed complete all as specified and directed by Engineer-in-Charge.

Taking down up to 100mm dia PVC pipe and fitting from wall and floor of any description complete all as specified and as directed.

S&F 110mm dia PVC SWR pipe laid to floor/ fixed to wall with rubber washer complete and fixed to clamp complete all as specified and as directed.

S&F 75/80mm dia PVC SWR pipe laid to floor/ fixed to wall with rubber washer and fixed to clamp complete all as specified and as directed.

S&F in repair 75 mm dia out let floor trap and fixed in floor complete including fixing with concrete and making good,

S&F 110mm PVC SWR Bend including fixing with rubber washer complete all as specified and as directed.

S&F 75/80 mm dia PVC SWR Bend including fixing with rubber washer complete all as specified and as directed.

S&F 110mm dia PVC SWR Single branch/Tee with access door including fixing with rubber washer complete all as specified and as directed.

S&F 110mm dia PVC SWR WC connector with lip ring/bent type complete all as specified and as directed.

S&F in repair 75/80 mm dia PVC SWR Single branch/Tee with access door including fixing with rubber washer complete all as specified and as directed.

S&F 32mm dia PVC LDPE pipe with fitting such as elbow/socket of pressure rating 6kgf/sqcm laid in wall and floor including cutting chase and fixing in complete and making good complete

S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 75 mm dia pipe and fixed to wall complete all as specified and as directed.

S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 110/100 mm dia pipe and fixed to wall complete all as specified and as directed.

Dismantling of floor, hearth, or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

S & F vitrified tiles tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor fineshes all as specified .

M&L Glazed Ceramic Coloured Tiles, 300X200X7mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Dismaintling of Stone slabs and tiles of any description or thickness in floor orwall, aprons and laid badded and pointed in any mortar. Etc complete all as specified and as directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished, rounded and chamfered ) in steps, jambs, pillars, window- cills, cooking platforms in full length upto 2.50 mtr and laid over and including 10 to 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required complete all as specified and as directed.

Taking down and refixing of old serviceable water closet pedestal pattern after completion of Tile or other work with 75mm long Brass screw fixed in floor including pointing and making good complete all as specified and as directed.

M&L Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) with white Plastic Seat cover, with Recessed Bottom closed pattern and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair PVC dual flushing cistern low level of 10 Ltr capacity valveless, symphonic action type (white colour) with inlet, balll valve, float end handle including flush pipe of 32 mm bore MS chromium plated and connection to pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP brass Bib Tap with Capston head complete all as specified and directed by Engr in charge. Cat part No: MMO-1020A of Make-marc or equivalent out of makes specified in list of makes.

S&F in repair, CP brass angle cock with Capston head complete all as specified and directed by Engr in charge. Cat No-MOR-1060A of Make-Marc/Prima or equivalent out of makes specified in list of makes.

S&F stop valve CP 15mm bore(Concealed type), cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed. Make :- Cera, Johnsen, jaugar, Marc.

S&F in repair, brass CP mixer any type suitable for sink with swivel spout complete all as specified and directed by Engr in charge. Cat part No :MCR-204 of Make-Marc or equivalent out of makes specified in list of makes.

S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge.

Taking down and refixing of old Mixer Valve (Wall Mixer/Wash Basin Mixer/Kitchen Mixer) after repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

Taking down and refixing of old bib cock / angle cock/ stop cockafter repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

S&F centre hole Brass CP mixer for mixing hot & cold WHB Mixer 15mm Bore (dia) screwed down for iron pipe and fixed including Taking down unserviceable WHB Mixer of any description, complete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

S&F Wall Mixer 15mm Bore (dia) brass chromium plated without hand shower for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for preparing new plastered surfaces plastered on walls including cornices plasters and applying two coat of oil bound distemper over a coat of primer complete and over 1 to 2 mm thick birla putty punning complete all as specified.

S&F in repairs aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per spd. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent. (h) Six lever mortice lock brass on in each door. (j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Colour) 5mm thick.

S&F in repairs aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per spd. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per spd. (f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment.

S&F in repairs aluminium powder coated Ventilator with Top Hung shutters /fixed type with section of 16 guage including necessary jointing cleats, glazing clips, rubbers gasket, anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete all as specified and directed by Engineer-in-Charge.

S&F as in repair over head shower 120 mm dia/150mm square size cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge .

S&F in repair grating round /circular with waste hole or without waste hole of dia 75mm/ 100mm size of stainless steel complete all as specified and as directed by the Engineer in Charge.

S&F in repair, CP brass soap dish, complete all as specified and directed by Engr in charge. Cat No-AT03 of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

S&F in repair 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap complete all as specified and as directed by Engineer-in-Charge.

S&F SS Chromium Plated Towel Rail 600mm Long and 20mm dia, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete as all specified and directed.

Removal of debris/malwa to a distance exc 10 Km but n exc 15.00 Km out side MD land and filling in low lying area complete all as specified and as directed.

Note :- The amount of Rs 98770/- against Schedule of Credit on Srl Page 144 shall be deducted from the total amount quoted against Sch 'A'

M/S Parshant Associates

Sumit Enterprises