SPECIAL REPAIRS TO STATION COMMUNITY HALL AT AIRFORCE STATION YELAHANKA

Amount

Dismantling of wall and ceiling boards (fibre pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.

S&F ceiling Board 12mm thick as panels in ceiling, inserted or fixed with screw as per manufacturer's instructions. Make: Amstrong or equivalent.

S&F Anodized aluminium snap grid of size 605mmx605mm frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Engineer-in charge.

Taking down chowkats or frames with shutters, without taking off shutters from the frames, n.exc 1.5 Sqm each.

Taking down chowkats or frames with shutters, without taking off shutters from the frames, exc 1.5 Sqm but n.exc 4 sqm each.

S&F Powder coated aluminium frame for doors, windows, ventilators,partition with one or more rebates including joining cleat for fixing etc above to (minimum thickness of owder coating 50 micron) . complete all as specified.

S&f Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.(Thickness or powder coating not less than 50 micron). complete all as specified.

S&f Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. complete all as specified.

S&F 12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber ,alminium frame workall as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane.

All as per item No.10 above but figured glass pin head type.

S&F Mortise lock, vertical type, size100 mm four lever .

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. Note : Rate quoted by the contractor is inclusive of rate for fixing of wire cloth in steel& wooden windows/ventilators with all as specified and directed .

S&F Aluminium grills diamond shape fixed in aluminium frame all as specified and directeted by Engr in charge.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

M&L for RCC type B1 1:2:4(Nominal mix) using 20 mm graded aggregate as in Slabs suspended on walls beams and columns in floors,roofs,landings balconies,conopies deck slabs and in shelves and the like all as specified and directed.

M&L for Form work to soffits of suspended slab such as roof slabs,floors slab landings and similar work n exc 200 mm thick.

M&L for TMT bars 10 mm dia and over ,cut to length ,bent to shape required,including cranking ,bending spirally for hooping cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed).

M&L for TMT bars 6 mm to 8 mm dia cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed).

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; etc including dismantling of old sections complete all as specified & directed by Engr-in-charge.

Preparing of New steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer zinc crane.

Demolition of brick work built in cement mortar including all quoins arches,pillars etc.

Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete

M&L for Brick works with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specifiied and directed.

M&L for Brick works with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick, built in CM 1:6, complete all as specifiied and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete sur-faces in cement mortar 1:6 for finished even and smooth without using extra cement.

M&L for rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement for finished even and smooth without using extra cement. Note:WPC will be measured and paid separately.

Supply only Integral water proofing compound.

M&L for prepration of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant cement primer over 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of exisitng treatment of old decorated surfaces of wall applying two coat of oil emulsion distemper over a coat of alkali resistant cement primer over 2mm thick wall care putty complete all as specified and directed.

M&L for Preparation of the new surfaces of walls plastered , and applying two cots of cement base paint , complete all as specified and as directed.

M&L for preparation of the old surfaces unplastred of wall complete removal of existing treatment applying two coat of cement base paint ,complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above ground level .

M&L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.

M&L for vitrified ceremic light shed tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed :in neat cemetn slurry and pointed in white or coloured cement to match.

M&L for Granite( of any size) work in cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20 mm thickness.

M&L for glazed ceramic coloured tiles (light shade) of size 350x250x7mm/450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in CM (1:4) on vertical surfaces as backing coat complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete all as specified & directed.

M&L for polishing of kotastone ,marble /terrzo floor including material all as specified and directed by engr in charge.

Taking up or down 15mm steel tubing and connections all as specified and directed.

All as per item No 47 here-in-before but 20mm bore

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge .

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed .

S&F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified.Make : Cera/Parryware/Neycer

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified.

S&F in repair Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Cera Model F3002152 or equivalent.

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed .

S&F in repair gun metal globe gate valve 20 mm bore.

S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

S&F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.

S&F in repaiers CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

S&F CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.

S&F cornor glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F in repairs CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F in repairs Stainless steel Toilet paper holder, mkae Jaguar Model AKP 35753P or equivalent all as specified and directed.

S&F stainless steel Soap dish fix to wall all as directed and specified.

S&F Corner glass shelf large, 300x300mm.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin.

Supply and Fixing of 32mm waste pipe for wash hand basin all as specified and as directed

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement

S&F PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors

PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F PVC (SWR) bends 75 mm dia in any radius with access etc.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc.

S & F PVC (SWR) branch piece single (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc.

S&F CP grating size 100mm

S&F brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.Make : Cera/Jaguar/Ess Ess

S&F aluminium powder coated drapery rod 32mm dia including suitable fancy type suitablre brackets on both ends fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

S& F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

S& F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed .

Taking down the unserviceable point wiring (light, fan,socket or power) complete with fittings such as switches, sockets ceiling roses pendent regulators, sockets etc any light points and making good distrubed surfaces of walls and floors etc.

Taking down unserviceble DBs, with MCBs and Main switches.

Taking down Ceiling fan and refixing the same after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

Suppl and fix GI tube light grade of dia 40 mm fixing at concrete pillar upto 500 mm incl finshing etc. all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross sectional area ) , single core, PVC insulated with multistranded PVC unsheathed copper conductor FR cable in and through concealed steel PVC conduit and including earth wire continuity of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following:-

(a) One light /Exhasut fan point controlled by one 5 Amps switch

(b) One ceiling fan controlled by one 5 Amps switch

(c )All as per item No 4 above but socket 5 amp on independent board.

(d)All as per item No 4 above but socket 5 amp on Same Board.

(e) All as per item No 90 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Supply and fixing PVC Round block for mounting tubelight fitting etc,

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fixing of PVC Lamp holders Angle/Batten all as specified and directed by Engr-in-Charge.

S & F Modular stepped type electronic fan regulator 2 Module, on the existing phenolic laminated sheet etc. as reqd

Supply and fix Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 1 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 2 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 4 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 8 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 1/2 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 3 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 4 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 6/8 module ISI marked complete all as specified and as directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete.

Supply and fixing LED , Tube light fitting 20 Watts with decorative box type suitable for 1x20 W LED tube surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting,including dismantling old unsv fittings all as specified and directed. Make CG Cat No : DMLN1LT8-20 and LT8-20 or Equivalent in bajaj/Philips/OSRM/Havells

Supply and Fixing 36 watts 5700 K Recess Mounting LED fittings with Control driver with efficiency 90 % with Recessed mounted direct/indirect architedtural luminaire and luminaire gives soft glare free light for voluminous office lighting suitable for POP / GYPSUM ceiling and including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : CG Cat Part No. LCTRP-36-CDL or equivalent make of bajaj/Philips/OSRM/Havells

Supply and fixing PEARL Round/Square LED 18 watts 230 volts surface mounted slim LED panel with powder coated finshed in white housing, with Control driver with efficiency 90 %,including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Crompton Greaves model No LCDSPLN-R-18-CDL or equivalent make of bajaj/Philips/OSRM/Havells

Supply and fixing LED 14 Watts 230 V, with Control driver with efficiency 90 % ,attractive type sleek LED mirror light 2 feet fitting with high output diffuser prewired inluding all accessories and connecting up with twin core twisted copper conductor with suitable size completed all as specified and directed. Make CG Cat No : LCL-14-CDL or Equivalent in bajaj/Philips/OSRM/KRIPA

Supply and fix 45 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %,with heat resistant glass and IP 65 protection with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Crompton Greaves model No LSTP-45-CDL or equivalent make of bajaj/Philips/OSRM/Havells

Supply and fixing LED-Post top 40 Watts 230 V, with control driver with efficiency 90 %, Decorative post top for 360o with high output diffuser prewired including all accessories and connecting up with twin core copper conductor with suitable size complete all as specified and directed. Make CG Cat No- LPTO-40-CDL or equivalent bajaj/Philips/OSRM/Havells

Supply and fixing on wall LED flexible rope type, IP 65 water proof ISI marked complete all as specified and as directed. Make-Sample approved by Engr-in-Charge.

Sub main wiring complete with two runs of 1.5 Sqmm single core PVC insulated heavy duty ISI Marked unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and condit accessories concealed /fixed to walls/roofs/floors etc.., and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 1.5 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge.Note:- Two Run of 1.5 Sq mm, one Run of 1.5 Sqmm And PVC conduct is measured as one Run or one Meter.

Supply and fix Sheet metal enclosure double door MCB DB SPN 16 way with 200 A rated bus bar & neutral link flushed inside the wall including flushing the DBs inside the walls and making good the disturbed surface also matching with the existing surface complete all as specified and directed by Engr in charge.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 2 way Single door flushed inside the wall without bus bar including flushing the DBs inside the walls and making good the disturbed surface also matching with the existing surface complete all as specified and directed by Engr in charge.

Taking down and Supply and Fix MCB SPN 6 to 32A, 10 KA rupturing capacity.

Taking down and Supply and Fix MCB SP 6 to 32A 10 KA rupturing capacity.

M&L earthing complete with GI earth plate electrode 600mmx600mmx6mm thick buried in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected with GI earth wire of 4 mm dia up to a length of 7.5 mtr long by means of GI bolts, nuts,washers etc and protected by GI pipe light grade 40mm bore and 20 mm dia GI tubing light grade with funnel for watering, connecting to test point, all as shown in electrical plate No.3 of SSR Part I incl necessary earth work and excavation in any type of soil, PCC(1:3:6) type C1 earth chamber with RCC cover slab 50 mm thick,with RCC 1:2:4 type B1 with 8 mm CTD bars re -inforcement both ways at 140 mm C/C with MS hook,including salt, charcoal and provn of test point complete.

Supply and fix wall mounted cabin fan 400 mm sweep,220-240 volt AC,50 Hz sigle phase with Thermal overload Protected Moto. Make.Standard,model No - SW 01 or equivalent in Bajaj/Khaitan/orient/Crompton

Supply and fix single phase Refresh air-HD Metal Industrial energy efficient heavy duty motor Exhaust Fan 380 mm sweep 1400 RPM and connecting up including provison of cabe from ceiling rose/connector to Exhaust fan all as specified and directed. Make - Standard or equivalent to Havells/Crompton/Bajaj/Khaitan

M & L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-in-charge.

Sri Maruthi Builders

Aditya Associates

Lakkaiah Rangaswamy