PROVN OF COVERED SHED AT 97 AD GP (SP) WKSP UNDER GE NASIRABAD

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc in Hard / Dense soil complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm thick crushed stone aggregate) as in foundation, mass concrete complete all as specified and directed.

M & L for PCC 1:2:4 type D-2 (using 20 mm thick crushed stone aggregate) as in foundation, mass concrete complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 ( using 20mm graded stone aggregate ) as in lintels upto 1.5m clear span, cills, steps; seismic, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided including necessary form work complete all as specified and directed.

M & L for brick work with Fly ash bricks straight or curved on plan exceeding 6m mean radius with old size bricks, built in cement mortar 1:4 complete all as specified and directed.

M & L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed. (WPC measured and paid separately) .

M & L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed.

M & L for preparation new decorated surfaces of walls and providing two coat of cement base paint over one coat of alkali resistance priming coat of paint complete all as specified and directed.

M & L for preparation new decorated surfaces on walls and applying three coats of white wash complete all as specified and directed.

S & F for steel work in tubular trusses, purlins, rafter including special shaped washer etc, complete using ERW or induction butt welded tubes complete all as specified and directed.

S & F for plates Fe-290 (Gde-165 (plain or chequered) channels sqare cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M & L for 11 to 15 mm dia mild steel screw bolts, length 10cm and n exc 15 cm long (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed.

M & L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws fixed with L & J hooks and washers, in roofs, walls etc with grade of zink coating 275 all as specified and directed

M & L for hard core of gauge not exceeding 63mm of broken stone, deposited, spread and levelled layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Removal of excavated soil material exceeding 50m and not exc 250m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning filling in, including spreading levelling watering snf well ramming in layers biit exceeding 25cm thick with soft/loose soil complete all as specified and directed.

M & L for 75mm thick cement concrete type C-2 1:3:6 (using 20mm graded stone aggregate) in plinth protections/ hard standing finishing the surface without using extra cement complete all as specified and directed.

Shree Sai Ram Enterprises (BID ID -3243087)

M/S JAGDISH PRASAD AIRUN (BID ID -3244762)

M/s SUNIL ENTERPRISES (BID ID -3242680)

VIPRABANDHU CONSTRUCTIONS (BID ID -3244251)

M/S SHRI RAM CONSTRUCTIONS (BID ID -3244044)

GWALIOR TRADE LINK (BID ID -3244408)

M/S MAMTA CONSTRUCTIONS (BID ID -3244576)

TARA CHAND JI GOMA CONSTRUCTIONS CO. (BID ID -3244643)

V K LAKWAL CONSTRUCTION (BID ID -3244665)