COMPREHENSIVE REPAIR AND MAINTENANCE OF JOINERY, PLUMBING, TILLING AND MISC WORK IN JCOs ORs MD ACCN UNDER AGE BR - I OF GE WEST MATHURA

Amount

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed by Engineer-in-charge.

Refixing door shutters of any description having area exc 1.00 sqm but not exc 2.00 sqm, each in the same opening including easing of door / window / cup board shutters for easy closing / opening incl tighening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed by Engineer-in-charge. Note :- Labour for taking down of shutter included in this item, nothing shall be paid extra.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 10.00 here-in-before but except brick. Note : Old serviceable brick retrieved from serial item No 2.00 of BOQ here-in-before shall be used under this item.

S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M&L for cement concrete type C-1, (1:3:6) using 20mm graded aggregate as in bed block or filling of chowkhats including necessary form work complete all as specified and directed.

M&L 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR Part-1 section 8.24 (a) complete all as specified and directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

S&F 30mm thick factory made solid PVC moulded door shutter with particle board core with 5mm thick PVC moulded sheet on the front face and 5 mm thick PVC plain colour sheet on back face complete all as specified and directed by Eng-in-charge.

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading screws Anodise aluminium fitting such as peg stays 150 mm long (1 No ), including pag stay and hinges type B-21 100 mm long (2 No) and suitable handle (1 No) complete all as specified and directed.

S & F in repairs powder coated aluminium sliding window using 63mm x 38mm x 1.6mm with or three track with 48mm x48mm x 1.6mm openable section as in shutter including ornamental aluminum grill with 0.36mm dia wirecloth/5.5mm thick glass panes of approved make with rubber beading/aluminium beading aluminium cleat for fixing glass or wire cloth and including builders hardware such as rip handle and locks and other fittings anf fixtures etc complete all as specified and directed.

M&L for aluminium grill mesh made out of 6mm dia having girth not exc 25mm both ways fixed with aluminium cleat to window frame complete all as specified and directed by Engineer-in-Charge.

S&F Sheet glass 4 mm thick in glazing to aluminium door, window & partition including pad, gasket complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-charge.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-charge.

S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repairs 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.

S&F Aluminium handles cast type anodised of size 150mm size, complete all as specified and directed.

S&F in repairs Aluminium handles cast type anodised of size 125mm size, complete all as specified and directed.

S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed by Eng-in-charge.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame and punching or drilling out old glazing pins/spring clips complete all as specified and directed by Engineer-in-charge.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified and as directed.

M&L 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified and as directed.

S & F Factory made Steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of zinc chromate primer complete all as specified & directed by Eng-in-charge.

S & F Factory made Steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of zinc chromate primer complete all as specified & directed by Eng-in-charge.

M&L for glazed ceramic tiles (coloured) 450mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) including necesary cutting as per site requirment complete all as specified and directed by Engineer-in-charge.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

All as per item No 43.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in floors finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L forming contraction (Dummy) joint 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for Shelves (veneering to wall) including 15mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on fair face of brick or concrete surface,finished even and smooth without using extra cement complete for heigh upto G+2 story building complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed.

Supply only Liquid water proofing compound of approved complete all as specified and directed.

M&L for applying rust remover @ 5-6 Sqm/ ltr, after cleaning to remove loose rust/scales/corrosion from reinforcement bars having specific Gravity 1.2-1.22. The material to be applied to the rusted metal using brush, allow it to react for 16-24 hrs & afterwards wire brushing the surface, clean with dry cloth before application of protective coating etc complete all as specified and directedby Engineer-in-Charge.

M&L for fixing welded MS wire mesh weighing not less than 1 Kg/Sqm in soffit of slab and applying using mucis protezion ferro mono primer and anticorrosive primer uncovered steel and concrete surface chemical (Single component, cementitious corrosion inhibiting primer) on uncovered steel reinforcement and wire mesh having mixed density of 2.01-02.05, adhesive on bond strength- 1 N/mm touch drying time of 10-15 minutes and applying 20 mm thick cement mortar (1:4) with using integral water proofing liquid admixture for concrete mortar and integral water proofing compound for cement based concrete and mortar chemical 100/L 1.1-1.2 gm/cc, Cont/-

Cont/- chloride content nil as per IS 2645-2003 & using acrylic polymer base bonding agent and acrylic emulsion modifier and water based concrete bonding agent chemical STD having specific gravity of 1.02) in ratio as per recommendation of manufacture total chemical not less than 8 % by weight and providing single component polymer modifier using single component thixopropic fibre reinforced polymer modified repair mortar (1:1:4) to achieve compressive strength of 15 N/mm in 1 Day, 25 N/mm in 3 days, adhesion bond strength of > 2 N/mm complete all as specified and directed by Engineer-in-Charge.

Cont/- Unrestrained expansion upto 4% pressure to restrain plastic Expansion -Approx. 0.004 N/Sqmm , before pouring it is recommended to apply granolithic E-Resin based solvent free concrete bonding agent/EP in accurate proportion with complete homogenesity.Cementitious micro concrete having mix density of 1.45 to 1.5 Kg/litre, Compressive strength(BS 6319 Part-2)-40 Mpa at 7 days, Flextural strength (BS 6319 Part-3)-25 Mpa at 7 days, Tensile strength (BS 6319 Part-7)-15Mpa at 7 days, Bond strength(ASTM C 881)-11 N/sqmm at 7 days, having an over lay time of 03 hrs at 30 C. pouring of using suitable arrangement as required using pumping device for uniform flow of ensuring proper bond between the metallic aggregates (Mixed density @27OC) Approx. 0.004N/mm2. 10 - 12 x 10-6 / OC.1.5 W/mOC2200 - 2300 K and existing concrete substrate etc. complete including all tools and tackles complete as all specified and directed.

Taking up or down 15mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note: GI tubing retrieved vide item No 55.00 shall be used under this item.

Fixing only 20mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note: GI tubing retrieved vide item No 56.00 shall be used under this item.

Disconnecting existing tanks of capacity exc 500 ltr & not exc 1000 ltr, setting aside (or lowering if required) for repairs and cleaning & removing all scale and dirt etc, from tank and from mouths of circulating pipes and hoisting and re-fixing in same or other position complete all as specified and as directed by Engineer-in-charge.

S &F for rotational moulded polythelene water tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position for 750 ltr. storage capacity including disconnecting and taking down old unserviceable tanks and ball valve complete all as specified and directed.

S&F in repairs 20mm dia PTMT ball PVC valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Eng-in-charge.

S&F 20mm dia PTMT ball PVC valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Eng-in-charge.

S&F in repair 20mm Gate valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed.

S&F in reapir PVC water tank cover for any capacity of PVC water tank fixed with suitable bolt & nuts complee as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall complete including taking down old unserviceable PVC pipe with fittings complete all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall complete including taking down old unserviceable PVC pipe with fittings complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F in repairs 32mm bore CP waste coupling fittings for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed complete all as specified and directed by Eng-in-charge.

S&F in repairs 40mm bore CP waste coupling fittings for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed complete all as specified and directed by Eng-in-charge.

S&F in repairs PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 100 mm size complete all as specified and directed by Eng-in-charge.

S&F in repair CP Jet spray butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed by Eng-in-charge.

S&F in repair 450mm long PVC connection suitable for 15 mm bore with PTMT nuts on both sides complete all as specified and directed by Engineer-in-charge.

S&F in repair 600mm long PVC connection suitable for 15 mm bore with PTMT nuts on both sides complete all as specified and directed by Engineer-in-charge.

S&F in repair 15mm bore CP angle valve, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

S&F in repair 2 way 15mm CP angle fancy type 15 mm bore high pressure screwed for iron pipe complete all as specified and directed.

S&F in repair 2 way 15mm CP bib tap fancy type 15 mm bore high pressure screwed for iron pipe complete all as specified and directed.

S & F in repair for 15mm bib tap standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge.

S & F in repair 2 way 15mm bib cock standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge.

S & F in repair for 15mm angle cock standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge.

S & F in repair for 15mm Pillar tap fancy type standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge.

S&F in repair wall mixer CP brass cromium plated hot and cold with or without telephonic shower arrangement 15 mm bore complete all as specified and directed.

S&F of washers/brass splindle in bib tap/Pillar tap/angle valve/stop cock/concealed cock of any pattern of size 15mm to 20mm bore.

S&F in repair 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan Orissa pattern, white of size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, PCC filling and connection to trap and flushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device and jet spray complete all as specified & as directed by Engineer-in-charge.

S&F in repairs PVC EWC seat cover of any type, white colour for pedestal pan complete all as specified and directed by Eng-in-charge.

S&F in repair 10 litre capacity PVC valveless symphonic action type low level flushing cistern (ISI marked) including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed by Engineer-in-charge.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F in repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair pillar taps (fancy type) swan neck with long shank, of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, overall size 915mm x 460 mm / (36" x 18") bowl size 410mm x 355mm / (16" x 14") and depth 175mm / (7") including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated 32mm bore with long screwed shanks and fly nuts including making holes in brick walls for brackets and fixed in CM (1:3) or PCC 1:2:4 type B0 complete all as specified and directed by Engineer-in-charge. Make :- Nirali model Elegance (Glossy) / Prayag model No 1128-D Gold Series (Gloss) / Silver Shine (Bluestar sanitary industries Pvt Ltd) model No SSSB-52 (Glossy) or equivalent in makes mentioned in Appendix 'A' here-in-after. Note :- Size of sink for different mafufacturer may slightly varried from size mentioned in description of item. Contractor has to provide sink as per cat No mentioned against make of sink. where cat No is not mentioned against any make, in that case sink of size mentioned in description has to provide, if exact size of sink is not available, then next higher size sink has to be provided. Nothing extra shall be paid on this account.

S&F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm including making holes in brick walls for brackets and fixed in CM (1:3) or PCC 1:2:4 type B0 complete all as specified and directed by Engineer-in-charge. Make :- Nirali model Elegance (Glossy) / Prayag Gold Series (Gloss) / Silver Shine (Bluestar sanitary industries Pvt Ltd).

S&F in repair stainless steel plate rack of size 750mm x 600mm x 254mm made out of 0.63mm thick stainless steel of first quality complete all as specified and directed by Engineer-in-Charge. Make :- Nirali model Elegance (Glossy) / Prayag Gold Series (Gloss) / Silver Shine (Bluestar sanitary industries Pvt Ltd).

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and treating oil and greasy spots and applying one coat of oil bound distemper oil emulsion white or tinted complete all as specified and directed.

M&L for complete removal of existing treatment on old internal wall surfaces of any description and preparation of old surface by mechanised sander having suction vaccume bag and after preparing the surfaces applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty on walls surfaces and smoothening the surface etc complete all as specified and directed. Note : (i) Acrylic distemper shall be done by using airless roller. The cost of the same deemed included in quoted rate. (ii) In case of places where using of mechanical equipment are not possible, Contractor may use manual scraping tools for surface preparation with prior approval of Engineer-in-Charge.

M&L for preparation of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying one coat of white wash complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint on walls for height upto G+2 story bldg complete all as specified and directed.

M&L for complete removal and preparation of old painted surfaces of wall and applying two coat of exterior emulsion paint for height upto G+2 story bldg complete all as specified and directed.

S&F in repairs curtain rod, stainless steel of 25mm dia with fixing brackets stop rollers etc fix complete all as specified and directed.

S&F in repairs mild steel Door seal for doors upto 1000mm long and thickness not less than 1mm complete all as specified and directed.

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed by Eng-in-charge.

S&F in repairs peg set of five of stainless steel bright finished, fixed complete all as specified and directed by Eng-in-charge.

M&L for bands, straps, supports or stays for rainwater, Ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and lintle hanges, large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia; 'D' type, 600mm long between flanges fixed to plug with chromium plated brass screws including wooden or plastic cleat complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC Syphon kit assembly in existing flush tank complete all as specified and directed.

S&F in repair PVC mirror cabinet size 350X450mm of standard size fixed to wall with PVC sleeves and steel screws complete all as specified and directed.

S&F in repair Glass shelf 450mm long x 100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repair corner glass shelf of size 300X300 mm including brackets fixed to wall with pvc sleeves and stainless steel screw complete all as specified and directed.

S&F in repair stainless steel grating 100mm bore size fixed with white cement complete all as specified and directed by Eng-in-charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge.

S& F 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with decorative on one side & other side balancing white fixed by drilling screws complete all as specified and directed by Engr-in-charge.

S& F 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with both side balancing white fixed by drilling screws complete all as specified and directed by Engr-in-charge.

S&F 100mm long stainless steel handles, oval type complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 30 mm Width of flaps (when open) in mm all as specified all as directed.

S&F Chrome plated stainless steel wire basket for utensils with necessary fixing clips fixed in cupboard etc .complete in all respect as specified and as directed by engineer-in-charge.

S&F Ball bearing runners 45 MM Telescopic (KTS-20) full extension load capacity 50 kgs.

S&F Auto closing hinges 35 MM of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 digree for kitchen cabinet shutters, as per sample approved by the GE.

S&F magnetic catcher of size 20mmx50mm suitable for kitchen cabinet shutters/ cupboard, complete all as specified and directed.

Taking down surface / concealed copper / aluminium point wiring (light, bell, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators, tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and directed.

M&L for Point wiring complete with 2.5 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 2.5 sqmm multi stranded FRLSH, PVC insulaedcopper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.

All as per Sl item No 134.00 above here-in-before for light point controlled by two way switch complete all as specified and directed.

All as per serial item No. 134.00 here-in-before but for One 3 pin 5 Amp socket outlet on independent board.

All as per serial item No. 134.00 here-in-before but for One 5 pin 5 Amp socket outlet on the same board with other switches.

M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.2mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.

M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick Polycarbonate based sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLS multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfacescomplete for one socket 20 Amp socket outlet controlled by one switch on independent board.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good disturbed surfaces complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good the disturbed surfaces complete all as specified and directed. Note: Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.

S&F switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.

S&F switch piano flush button single pole, one way 15 Amp 240 Volt complete all as specified and directed.

S&F switch piano flush button single pole, two way 5 Amp 240 Volt complete all as specified and directed.

S&F socket outlet 6 amps 5 pin flush type, 230 volts complete all as specified and directed.

S&F socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.

S&F in repair sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of cap 20/25 A, C series complete all as specified and directed.

S&F ceiling rose 63x30 mm three terminal, polycorbonate body complete all as specified and directed.

S&F fan regulator electronic, five step type hum free suitable control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed.

S&F Angle / batten holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

S&F LED bulb of capacity 10/12 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S&F in replacement surface and wall mounted 20 watt LED batten, PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F in replacement 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F in replacement surface and wall mounted 10 watt LED batten, PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F in repair building security light of 30 Watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver including all fixing arrangements complete all as specified and directed.

Supply & fixing in replacement ceiling light with 36W Watt, 6000 K, slim LED panel 2' x 2' LED panel for recessed on ceiling) dust-free installation with high brightness LEDs for glare-free homogenous illumination with driver and all other connected accessories complete all as specified and directed.

Supply & fixing in replacement sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & fixing in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & fixing in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & Fixing in replacment MCB Triple Pole Neutral, 240 volts, 63 Amps breaking capacity 10 KA (type C) complete all as specified and directed.

Supply & Fixing in replacment MCB SPN, 240 Volts, 32 Amps breaking capacity 10 KA, 'C' curve complete all as specified and directed.

Supply & Fixing in replacment MCB SPN, 240 Volts, 63 Amps breaking capacity 10 KA (type B curve) complete all as specified and directed.

Supply & fixing in replacement of MCB single pole 240 volt any rating from 6 to 32 amps, B series with rupturing capacity 10 KA complete all as specified and directed.

S & F in replacement of worn out MCCB with MCCB 160 Amp 36 KA ,4 pole, Ics=100% Icu,thermal adjustable-0.8 to 1 In,Magnetc Adjustment 5 to 10 In, Adjustable sensitivity :0.03-0.3-1-3 A, Adjustable tripping: 0-0.3-1-3s.-02 Each complete all as specified and directed.

Supply & Fixing in replacement of worn out MCB 100 Amp 4 Pole with MCB 100 Amp 4 Pole Breaking capacity 10 KA, 'C' curve all as specified and directed by Engr In Charge.

S&F in replacement of worn out fan capacitor with capacitor of capacity 2.5 MFD 440 volt complete all as specified and directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 4" x 4" including screws for fixing complete all as directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 7" x 4" including screws for fixing complete all as directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 8" x 10" including screws for fixing complete all as directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 11" x 5" including screws for fixing complete all as directed.

S & F in replacement of worn out sunkan box with Sunkan Box GI 1.22 mm thick of size 4" x 4" duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint including cutting chasing and PCC work, plastering and making good the disturbed surface and matching with existing by white wash/distemper complete all as directed.

S & F in replacement of worn out sunkan box with Sunkan Box GI 1.22 mm thick of size 7" x 4" duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint including cutting chasing and PCC work, plastering and making good the disturbed surface and matching with existing by white wash/distemper complete all as directed.

S & F in replacement of worn out sunkan box with Sunkan Box GI 1.22 mm thick of size 8" x 10" duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint including cutting chasing and PCC work, plastering and making good the disturbed surface and matching with existing by white wash/distemper complete all as directed.

S & F in replacement of worn out flexible wire with twin core flexible wire of size 40/0.0076 all as specified and directed.

S & F in replacement of worn out flexible wire with twin core flexible wire of size 23/0.0076 all as specified and directed.

S & F in replacement of worn out copper cable with PVC insulated, FRLS, unsheathed single core, multistranded copper conductor industrial cable 1.5 Sqmm all as specified and directed.

S & F in replacement of worn out copper cable with PVC insulated, FRLS, unsheathed single core, multistranded copper conductor industrial cable 2.5 Sqmm all as specified and directed.

iswar enterprises (BID ID -3102720)

MISHRA CONSTRUCTIONS (BID ID -3105021)

VANI CONSTRUCTION (BID ID -3102190)

Ahmed constructions (BID ID -3116787)