Provn of cattle fencing compound wall, boundary pillars and rain shed at AF Stn Bihta under GE (AF) Bihta

Amount

Excavation in post holes or similar holes in soft/loose soil each not exc 0.5 cum and getting out, retuning, filling in and ramming earth broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and directed.

Excavation in trenches, n, exc. 1.5m wide and n, exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for cement concrete type D- 2, 1: 4: 8 ( using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed .

Supply and fixing mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc flats iron fillets (for securing wire mesh etc ) including all necessary drilling,bolting or welding etc, and similar work confirming to Fe-290 Gde E -165 all as specified and directed.

Material and labour for mild steel round bars 10 mm dia and over cut to length, bent to shape for supporting chain link fencing complete all as specified and directed.

Supply only 4 mm dia galvanised iron chain link fencing n,exc 4.00 kg/sqm of approved mesh size including line wire etc complete all as specified and directed.

Fixing only chain link fencing including line wireof any mesh,size and type to MS angle iron post and struts by srtaining bolts, etc including provision binding wire etc complete all as specified and directed.( Note:- Chain link,link wire shall be mesured and paid separately)

Supply and fixing mild steel screws ( machine made)12mm dia with hexagonal or squre heads at one end and screwd the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm but not exc 15 cm long etc complete all as specified and directed.

Material and labour for brick work using sub class B bricks (using old size bricks) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even & fair complete all as specified and directed.

Material and labour 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for prepration of new plaster surface of walls and applying three coat of white wash complete all as specified and directed.

Material and labour for prepration of new plaster surface of walls and applying applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for cement concrete type B-0,1:2:4 ( using 12.5 mm graded crushed stone aggregate) as in coping and the like including weathering, slightly rounded or chamfered angles with & including necessary use and waste of form work for fair finished surface off concrete complete all as specified and directed.

Material and labour for prepartion of new steel surface of any description n exc10cm in width or girth and applaying two coats of synthetic enamail paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for prepartion of new steel surface of any description exc10cm in width or girth and applaying two coats of synthetic enamail paint over a coat of red oxide primer complete all as specified and directed.

Material and labour formild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends & binding with & including mild steel wire ( annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed..

All as per serial item no.19 here -in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

Material and labour for providing reinforced cement concrete type B-1, 1:2:4 ( using 20 mm graded crushed stone aggregates) in precast posts, fencing posts , straining or terminal posts , struts etc. for fencing ,average sectional area n exc 100 sqcm ,with or without chamfered angles and flat, splayerd ,rounded or mitred tops as directed and fixed complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately

Material and labour for prepartion of newly concrete surfaces of any description over 10cm girth or width and applying two coat of synthetic enamel paint over a coat of primer paint complete all as specified and directed.

Supply and fixing mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheetiing or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

Supply and fixing Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Material and labour for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets confirming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screwscomplete all as specified and directed.

VISHNUDEO CONSTRUCTION

TRIBENI SINGH AND SONS

M/S Rohit Enterprises