Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC GROUND FLOOR 66A BLOCK F GALI NO 4 HARI NAGAR EXTN PART 2 66A BADARPUR BADARPUR SOUTH EAST DELHI SOUTH DELHI DELHI 110044 | SOUTH EAST DELHI | DELHI | 110044 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹13.3 L+₹92,283.50 (7.48%)Rejected-Finance NO 650 3RD CROSS MATHIKERE BANGALORE 560 054 | BENGALURU URBAN | KARNATAKA | 560054 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹32,000
Closing Date
30 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8708REPAIR TO CERTAIN PERMANENT TEMP BUILDING AND PERIODICAL SERVICES AND MISC WORKS AT AFTC UNDER AGE B R WEST OF GE M AF JALAHALLI BANGALORE
2022_MES_549615_1
8708/E8
Open Tender
Civil Works
Item Rate
333 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹32,000
18 Jan 2023
2 Sept 2022
3 Oct 2022
2 Sept 2022
30 Sept 2022
17 Sept 2022
2 Sept 2022 - 9 Sept 2022
Amount
Demolition of brick work built in cement mortar or cement lime mortar and archor pillars etc but excluding ashlar facings dressed stone work and pre cast concrete articles.
Material and labour PCC block masonry with solid blocks 1:3:6 type C1 using 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 complete.
Taking down and re-fixing the same Alumuinium window/ ventilator shutters, (each shutter area n.exc 1sqm) after carrying out repairs as required including removing the existing beading and fixing new rubber beading of suitable size with adhesive, complete all as directed by Engineer in Charge .
Taking down and re-fixing the same existing Aluminium door (each shutter area n. exc 4sqm) after carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling complete all as required and as directed by Engineer in Charge
Supply and Fix in repairs double action floor springs aluminium body hydraulically regulated made up of minimum 1.2 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MA heavy duty universal type conforming to relevant IS complete all as directed by Engineer in Charge .
Supply and Fix in repairs 4 levers Brass Mortice lock, vertical type,of Size 100 mm all as specified in SSR Part-I and as directed by Engineer in Charge .
Supply and Fix in repairs 4 levers Brass Mortice lock, vertical type,of Size 75 mm all as specified in SSR Part-I and as directed by Engineer in Charge .
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets all as directed by Engineer in Charge ..
Supply and fixing GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre.
Supply and fixing Hangers 4 to 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia, 40mm long complete all as specified.
Material and labour for pre- painted Gypsum board/tiles 12 mm thick in ceiling insulation and acoustic purposes, 600 x 600 mm in size, fixed with screws to aluminium / GI frame work or with staples on snap grid in ceiling all as per manufacturers instructions and as directed by Engineer in charge.
Demolition of Cement concrete (unreinforced) in ground floor and pavings not exc. 15 cm thickness (below or above GL).
Material and labour for 75 mm thick PCC 1:3:6 type C-2(using 40 mm graded mechanically crushed stone aggregate )as in subbase , paving and plinth protection finished even and smooth without using extra cement.
Material and labour for 40 mm thick PCC 1:2:4 type B-1(using 20 mm graded mechanically crushed stone aggregate )as in flooring finished even and smooth using extra cement.
Demolition of re inforced cement concrete of any description and in any position not otherwise specifically provided.
Material and labour Pre-cast RCC cover slab in 1:2:4 type B-1 using 20mm graded stone aggregate and set in cement mortar 1:4 including necessary form work. Note : Reinforcement shall be measured and paid separately.
Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Material and labour for Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Material and labour Preparing the projected bolt surfaces over the CGI/PPGL sheets using wire brush /coir brushes to ensure dust free surface filling tar plastic and ensure free from dust particles before filling tar Plastic with the existing dia of a hole over the roof sheet before covering and sticking with a size of 50 mm x 50 mm Square UV resistant self adhesive flashing Bituminous tape (Super flash strip) to the existing self tapping screws over the roof sheet , and finally apply a coat of Shaliurethane compound (BTD) with Paint brush or suitable material to cover the surface as in repairs.
Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc.
Material and labour 15mm thick rendering in CM (1:4) on brick or concrete wall surface finished even & fair without using extra cement as in Wall with water proofing compound (Water proofing compound measured and paid separately).
Material and labour 15mm thick rendering in CM (1:3) on brick or concrete wall surface finished even & fair without using extra cement as in Wall with water proofing compound (Water proofing compound measured and paid separately).
Supply only approved integral water proofing compound, Make : complast x 421 IC, of M/s Fosroc Chemical (Inida) Ltd or equivalent
Material and labour 10mm thick rendering in CM (1:6) on brick or concrete wall surface finished even & fair without using extra cement as in Wall.
Material and labour three coats of white washing on walls including preparation of new plastered surface.
Material and labour three coats of white washing on ceiling including preparation of new plastered surface.
Material and labour two coats of distempering on new plastered surface including preparation of new surface.
Material and labour two coats of cement based paint on new plastered surface including preparation of new surface.
Supply and fixing continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Material and labour for MS tubular medium grade as in posts, purlins including distance pieces, cleats etc induction butt welded tubes conforming to IS 1161-1998 grade St-240
Dismantling of AC or corugated, semi corugated,etc. Sheet roof coverings
Supply and fixing 6 mm thick asbestos cement, corugated or semi corugated sheets in roofs, walls etc. fixed with L type or J type or cank hook bolts.
Supply and fixing Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or crank hook bolts.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to roof covering/cladding to wall, fixed with self tapping screws as specified.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Material and labour Preparation of new steel and iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.
Taking down wooden Shutters of any description n exc 1 sqm each and refixing same opening.
Taking down wooden shutters of any description exc. 1 Sqm and n. exc 2 sqm and refixing same opening.
Taking down wooden Shutters of any description n exc 1 sqm each
Taking down wooden shutters of any description exc. 1 Sqm and n. exc 2 sqm
Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqm and n.exc 4 sqm each and removing from the site
Taking down wooden chowkats or frames with shutters area n exc. 1.5 Sqm each and removing from the site
Taking down wooden chowkats or frames area n exc. 1.5 Sqm each and removing from the site
Taking down wooden chowkats or frames area exc. 1.5 Sqm and n.exc 4 sqm each and removing from the site
Supply and fixing second class hardwood of Plain fillets n.exc 3 Sqcm of square, rectangular or triangular in section, clean sawn, secured with nails or brads,
Supply and fixing in repair 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items including beading complete all as specified and as directed.
Dismantling of stone slab and tiles of any description of thickness in in floors, aprons laid bedded and pointed in any mortor.
Material and labour 18-20 mm thick granite(of any type) machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding grinding and polishing complete incl 15mm thick screed bed in CM 1:4.
Material and labour for 2nd class HW Plain,solid,straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
Supply and fixing for 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick reneered commercial plywood kilnseasoned chemically treated with 15 x 6 mm twedging all around the panels.
Supply and fixing for Glazed and skeleton shutters of 2nd class hard wood 30 mm thick shuttrs, open rebated and prepared (receive glass, gauze etc (without sash bars) edges of framing plane, chamfered or rounded, fitted with cut and miltered beeds for securing glass etc, size of members of shutters as specified in SSR Part I Section 8 Clause 8.20 (a) supplied and fitted to chowkhats.
Ditto all as per item No 54 above but divided into squares and rebated sash bars any numbers.
Material and labour preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth not otherwised described and treated with tar or coal tar black paint.
Supply and fixing mild steel hold fasts conforming to Fe 290 grade -E--165.
Supply and fixing Factory made PVC chowkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete as per manufacture’s specification
Supply and fixing Factory mode 30 mm thick PVC panelled door shutter, manufactured by M/S rajshree or equivalent ,made from MS tube of 19 gauge x 19 mm x 19mm for styles and 15mm x for top & bottom rails, covered with heat molded PVC channel of 5mm thick sheet and 30x 50mm wide to from styles and 5mm thick x 75 mm wide PVC sheet for top rail and lock rail on either side and 5mm thick x200mm wide crass PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted with MS frames welded/sealed to styles and rails with PVC sheet beading either side jointed together
Supply and fixing MS butt hinges medium weight cold rolled 100 mm size
Supply and fixing for 75mm long butt hinge.
Supply and fixingAlu anoldised handle 150 mm long.
Supply and fixingAlu anoldised handle 125 mm long.
Supply and fixing Alu anoldised barrel tower bolt 200 mm long.
Supply and fixing Alu anoldised barrel tower bolt 125 mm long.
Supply and fixing of 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
Material and labour two coats of synthetic enamel paint over a priming coat of pink primer incl preparation untreated surfaces of wood or wood based material exc 10 cm width or girth
Shutters of any description n exc 1 sqm each Resecuring or easing & adjusting, without taking down
All as per item No 69 above but exc 1 sqm and n exc 2 sqm each
Supply and fixing in rep 300 mm size mild steel helical door spring including roller and roller plate fixed to wooden/steel choukhat or frame with screw/welding complete fixed in repairs.
Supply and fixing in repairs 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21
Supply and fixing of 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed as in repairs
Supply and fixing of 125 mm Extruded aluminium alloy handles, fabricated type., anodised as in repairs.
Supply and fixing in rep 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
Supply and fixing in repairs galavanised SS wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm .
Material and labour for Running welding in repairs not exceeding 6mm thick metal exc 2.5cm but n exc 5cm in length complete all as directed.
Hacking out old broken glass pane any thickness any size from wooden/steel window frames
Supply and fixing for sheet glass 4 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane
Dismantling of timber scantling 40 Sq cm and over in section in any position in framed work
Material and labour for Second class hard-wood in scantlings clean sawn fixed to RCC, wooden post and wooden purlins incl drilling for nut and bolt
Material and labour preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwised described and treated with creosote oil .
Supply and fixing in repairs Aluminium (extruded section ) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.
Demolition and bracking up drain pipes of in any dia (salt glazed ware, AC or PVC, reinforced concrete) set in cement mortar incl bend and dimension piece etc. Complete.
Supply and fixing 110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.
Supply and fixing 75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.
Supply and fixing for PVC (SWR) bend 110 mm dia with access door
Supply and fixing for PVC (SWR) bend 75 mm dia with access door
Supply and fixing 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door
Supply and fixing 75 mm PVC (SWR) junction single, (Single T) equal or unequal with access door
Supply and fixing 110mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door
Supply and fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door
Dismantling floor hearth or wall tiling including cement mortar bedding but incl screed bed and plaster.
Supply and fixing Non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding .11 sqm but not exc. 0.18 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes
All as per item No 94 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4
Material and labour for Non skid tiles 7 to 8mm thick colour tiles (square/rectangular) area of each tiles exceeding 0.06 sqm but not exc. 0.11 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes
Material and labour glazed ceramic coloured tiles of size 350 X250x7mm /450x350x7mm thick as in vertical surface such as skirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match colour of tiles incl 10 mm thick plaster in CM 1:4 complete all as specified & directed
Material and labour glazed ceramic coloured tiles of size 300 X 200 X 7 mm thick as in vertical surface such as skirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match colour of tiles incl 10 mm thick plaster in CM 1:4 complete all as specified & directed
Supply and fixing for Vitrified ceramic tiles 10mm thick light shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes
All as per item No 99 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4
Supply and fixing for kota stone slab 20 to 25 of size 600 x 600 mm thick (Pre grinded and polished) bedded, jointed and painted with grey cement slury incl cutting and grinding/polishing incl 15 mm th 1:6 CM bedding layer incl dismantling.
Supply and fixing for Cement concrete chequered pre polished any coloured tiles 30cm x 30xm x20mm to25 mm thick, machine pressed; set, jointed and pointed in net coloured pigment in floors,incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes incl dismantling.
Supply and fixing in repairs for Fancy type powder coated curtain rod 20 mm dia fixed with brackets.
Taking up or down steel tubing and connector 15 mm bore in new or old position (wall ceiling floor etc)
Taking up or down steel tubing and connector 20 mm bore in new or old position (wall ceiling floor etc)
Taking up or down steel tubing and connector 25 mm bore in new or old position (wall ceiling floor etc)
Re-fixing only steel water tubing 15mm bore.
Re-fixing only steel water tubing 20mm bore.
Re-fixing only steel water tubing 25mm bore.
Supply and fixing GI tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.
Supply and fixing GI tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.
Supply and fixing GI tubing 25 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.
Supply and fixing in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))
Supply and fixing in rep 15mm bore stop valve of PTMT of any colour screwed for iron pipe comp.
Supply and fixing in rep 15mm bore stop valves cast copper alloy fancy type chromium plate with long shank & cup (concealed type).
Supply and fixing in repairs CP fancy type Bib cock 15 mm dia bore pipe .
Supply and fixing in repairs PVC connections 450mm long incl 15 mm bore fly nuts on both ends complete
Supply and fixing in repairs PVC connections 600mm long incl 15 mm bore fly nuts on both ends complete
Supply and fixing in repairs Pvc flexible Waste pipe/Urinal pipe of 32mm dia
Supply and fixing in rep Pvc flexible Waste pipe/Urinal pipe of 40 mm dia
Supply and fixing in repairs taking down high/low level cistern with brackets flush pipe etc complete and supply and fixing PVC low level cistern syphonic action type including inlet ball valve float and handle including brackets of approved make including all connectionSupply and fixinglush pipes for EWC & indian type WC.
Supply and fixing in repairs of Hot and cold wall mixer fancy type
Supply and fixing in repair 125 mm dia CP grating (With hole or without hole) complete for nanhi/Floor traps complete all as specified and directed by Engr in Charge.
Supply and fixingin repairs Brass chromium plated shower rose 125mm size, including fixing to steel pipe or union
Supply and fixing in repair viterious china white wash hand basin flat back white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brakets 2 Nos embedded in CM 1:4 type B-1 size 30 xm x 20 cm x 20 cm complete.
Supply and fix in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed.
Supply and fixing in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc incl provisioning of lime concretes
Supply and fixing in repair vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing.
Supply and fixing in rep for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Self-closing taps, cast copper alloy, chromium plated, screwed for iron pipe and fixed waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms)
Supply and fixing in rep 75mm PVC SWR floor trap with grating including jointing with solvent cement
Supply and fixingin repairs Health faucet CP for 15 mm bore with all accessories complete.
Supply and fixing in repairs plastic water closet seat cover, black/white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
Material and labour for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .
Material and labour for 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .
Material and labour for Providing, cement concrete 1:3:6 type C1( using 20 mm graded stone aggt) in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match inclucing ncessary form work.
Material and labour for water proofing treatment on horisontal and vertical surfaces with applying of oil bound bituminous primer @0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.00 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure on note No 6 of TD drawing No AFB/TD/260/06 sheet No 1/1(R) and applying a coat of blown grade @1.2 kg per sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bituminous aluminium paint/primer @0.1 Kg per sqm all as specified and as directed including Removing complete existing treatment on roof surfaces surfaces by picking , sweeping clean and washig down with water to remove dust, etc.
Material and labour for preparation of old decorated wall surfaces and applying one coat of white wash all as specified.
Material and labour for preparation of old decorated wall surfaces and applying one coat of white ceiling all as specified.
Material and labour for washing, rubbing down and stopping of distempered surfaces of walls and applying one coat of distemper oil emulsion all as specified
Material and labour for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint all as specified
Material and labour for applying one coat of Plastic emulsion paint including preparation of old painted surfaces all as spd and directed
Material and labour for preparation of old painted wall surfaces and applying one coat weather proof paint all as specified and directed
Material and labour for preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed
All as per item No 145 here inbefore but on steel surfaces.
Maruthi constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .