PROVN OF TWO ROOMS AT ER AND SPECIAL REPAIRS TO CERTAIN BLDGS (TOILET BLOCKS AND BATHROOM BLOCKS) OF ER AT RAYANG MIL STN UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Work, Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, complete all as specified and as directed.

Taking down/ up unserviceable Soil, Waste and Ventilating Pipes 75mm/ 110mm bore (dia) with Pipes Fittings of any descriptions, fixing on Walls or laid in Floors, etc., complete all as specified and as directed.

Surface Dressing not exc. 15 Cm deep and getting out in Soft/Loose soil, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Sand Filling under Floors, Foundations, etc. Including Spreading and Levelling, etc., complete all as specified and as directed.

M&L Hardcore broken Stone or Boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc., complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) for embedding of Holdfasts or Lugs, etc. including necessary Formwork, complete all as specified and as directed.

M&L Reinforced Cement Concrete M-25 (20mm graded stone aggregate) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under reamed Piles, complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete M-25 (20mm graded stone aggregate) in Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete M-25 (20mm graded stone aggregate) in Roof Beams, Lintel Bands, Cantilevers, Bressumers, Lintels over 1.50 Metre Span, etc., complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:1½:3 (20mm graded stone aggregate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams and Similar Work; Square, rectangular or polygonal, Vertical or to batter, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides of Pillars, Posts, Struts, Piers, Columns and Stanchions, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunchings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Pre-cast Cement Concrete 1:3:6 (20mm graded stone aggregate) Block Masonry with Solid Blocks, exc. 10 Cm in width, Set in Cement Mortar 1:6, complete all as specified and as directed.

M&L Damp Proof Course 40mm thick in Cement Concrete 1:2:4 (12.5mm graded stone aggregate) to Horizotal/Vertical Surface and Applying Evenly a coat of Blown type Bitumen at the rate of 1.50 Kg per Square Metre and blinding with Clean Dry Sand @ 0.05 Cum per Square Metre including necessary Formwork, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick, Plain Colour PVC Sheet, reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with heat moulded plain color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side & gap insert for Top Rail & Bottom Rail, Paneling of plain color PVC sheet to be fitted in the Mild Steel Frame, welded/sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement, complete all as specified and as directed.

S&F Steel Ventilator with Top Hung Shutter including Hinges with Steel Peg Stays, complete without Glazing Bars, dovetailed or welded, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 150mm long, anodised, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 200mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 100mm in size, fixed to Frame, complete all as specified and as directed.

S&F Aluminium Handle 150mm long, anodised, Cast type, complete all as specified and as directed

S&F Aluminium Wire Cloth 0.45mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Aluminium Wire Staples and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Steel Pins/Clips in Square not exc. 0.50 Sqm in Each Pane to Steel Windows, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel Framed Work as in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for hanging or sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and hanging; also fastening and fixing, conforming to Fe-410-W (Gde E-250), Quality A, complete all as specified and as directed.

M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290, Gde-E-165, complete all as specified and as as directed.

M&L Steel Work in Tubular Trusses including Special Shaped Washer, etc. complete using ERW or Induction Butt Welded Tubes, conforming to IS-1161-1979 Grade St.-240, complete all as specified and as directed.

M&L Mild Steel Plates (Plain or Chequered), Channels, Square cut, or Notched forming Holes without any Attachment, etc. in Landing including welding, etc. and Similar Work, conforming to Fe-290, Gde E-250, Quality B, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) with Hexagonal or Square Heads at One End and screwed the Other, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, Length of Bolt exc 22.5 Cm but not exc. 30 Cm and Diameter of Neck 20mm, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Gl Frame Work for Seamless Ceiling comprising of Gl Perimeter Channnel 0.55mm thick with Two Unequal Flanges of 20mm and 30mm and Web of 27mm fixed to surrounding Wall using Nylon Sleeves and screws at 450mm Centre to Centre/ Intermediate Channel 0.9mm thick having Two Equal Flanges of 15mm Each and Web of 45mm suspended from Soffit at approx 900mm Centre to Centre with Gl Cleat and Steel Expansion Fasteners with and including Ceiling Section (not exc 1200mm in length) of 0.55mm thickness having Kurled Web of 50mm and Flange of 26mm Each with Lips of 10.5mm fixed to the Intermediate Channel with Connecting Clips across the Intermediate Channel at 457mm Centre to Centre, complete all as specified and as directed.

S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F Non-Asbestos Fibre Cement Building Boards 4.0mm thick, fixed or laid/ inserted to GI/ Aluminium Framework with Screws, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Floors, etc., Levelling Course to laying Tiles, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles 7mm to 8mm thick (square/ rectangular) area of Each Tile exc. 0.06 Sqm but not exc. 0.11 Sqm (1st quality) conforming to IS:13755, in Floors, jointed in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Non-skid Ceramic Coloured Tiles 7mm to 8mm thick (square/ rectangular) Joint Free, Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) conforming to IS:13755, in Floors, jointed in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Non-skid Ceramic Coloured Tiles 7mm to 8mm thick (square/ rectangular) area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) conforming to IS:13755, in Floors, jointed in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Non-skid Ceramic Coloured Tiles 7mm to 8mm thick (square/ rectangular) area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) conforming to IS:13755, in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Glazed Ceramic Coloured Tiles 300x200x6.0mm to 7.0mm thick (1st quality) conforming to IS:13753, in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Coloured Chequered Cement Concrete Tiles 300x300x20-25mm thick, Set, Jointed and Pointed in Neat Cement Slurry in Floors fixed with Gray Cement and no Pigment, laid over and including Screed or Screed Bed 20mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick on Bricks/PCC Blocks consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:6 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid saperately under appropriate Item.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L Preparing Surfaces of Non-Asbestos Fibre Cement Building Boards Ceilings and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whiting as preparatory to Distempering, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing Old Painted Asbestos Cement Panel Board Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any description, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs (as ordered), complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.

S&F Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs (as ordered), complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Straight or Angular, Brass Chromium plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule including Taking/ Lowering down unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F PTMT Ball Valve 15mm bore (dia), having weight not less than 142 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Squatting Pan of size 580x440mm, White, Vitreous China, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, Front or Back Inlet, Set in and including Lime Concrete Bedding, jointing to Trap and Flushing Pipe, Anti-syphonage Pipe etc. and including providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including Making Good to Floor/ disturbed Surfaces and Fixed-in-repairs (as ordered), complete all as specified and as directed.

M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed

S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminium anodised Hinging Device and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron/ Mild Steel Bracket or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including Flush Pipe 32mm bore (dia), Polyethylene of Low or High density and Fixed-in-repairs (as ordered), complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin of size 550x400mm, White (Flat Back) including Waste Fitting 32mm bore (dia), Chromium plated and Waste Pipe 32mm bore (dia), Polyethylene of Low or High density, a Pair of Cast Iron/ Mild Steel Bracket or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts and Fixed-in-repairs (as ordered), complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 600mm in length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed.

S&F Shower Rose 125mm in size, Brass Chromium plated, with or without Swivel Joints, complete all as specified and as directed.

S&F Soap Dish, size not less than 100mm (as approved), Brass Chromium plated and fixed to Wall, complete all as specified and as directed.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), complete all as specified and as directed.

S&F Peg Set with 6 No. of Hooks, Mild Steel, Chromium plated, complete all as specified and as directed.

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Grating, Plain including jointing to Waste Pipe with Solvent Cement, complete all as specified and as directed.

S&F Stainless Steel Grating 125mm bore (dia), Circular, Chromium plated, fixed on Trap loose or with Cement Mortar 1:3, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches/Floors, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches/Floors, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any Radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any Radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal with Access Door, etc., jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal with Access Door, etc., jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), jointing with Solvent Cement, complete all as specified and as directed.

M&L Cutting into existing Manholes for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), smooth finished and reforming Benching as required, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, but excluding Light Fittings of any description, etc., Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out unserviceable MCB Distribution Board with MCB of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out unserviceable House Service Brackets with House Service Cable/Connection including connected Items of any description, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/CEILING FAN/ EXHAUST FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. for ONE 3/5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes after Sub-main Wiring, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping shall deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT (b) Sub-main Wiring will be measured existing PVC Conduit only. Wire required for looping, etc. as ordered will deem to be included in the Quoted Unit Rate.

S&F PVC Rectangular Block of size 175x100x50mm in depth, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/out unserviceable PVC Rectangular Block, complete all as specified and as directed.

S&F PVC Rectangular Block of size 200x150x50mm in depth, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/out unserviceable PVC Rectangular Block, complete all as specified and as directed.

S&F PVC Rectangular Block of size 250x200x50mm in depth, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc., complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Socket 2/3 Pin, 6 Amp, Single Pole, Flush type and connecting up, complete all as specified and as directed.

S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm, 3 Terminals suitable for 230 Volt AC, 6 Amp and connecting up, complete all as specified and as directed.

S&F LED Light Fitting 1 Foot Composite 1x9 Watt with 2 No. LED Lamp 9 Watt, Epoxy White Powder coated CRCA Sheet Steel Housing having Clear/ Opal Acrylic Diffuser, Internally Pre-wired and connecting with and including PVC Copper Flexible Cable 23/.0076, 3 Core from Ceiling Rose to Connector Block including Taking down/out unserviceable Light Fittings, complete all as specified and as directed. MAKE : HAVELLS, Cat No. LHEXARP6PN1W009 or equivalent Model in Make : BAJAJ/ CROMPTON/ PHILIPS (as approved by GE)

S&F LED Bulk Head Luminaire 1x10 Watt, Surface mounted, made out of Aluminium Pressure Die-Cast, White Finish Housing with PMMA Diffuser, Electronic Driver (in-built), Internally Pre-wired and connecting with and including PVC Copper Flexible Cable 23/.0076, 3 Core from Ceiling Rose to Connector Block including Taking down/out unserviceable Light Fittings, complete all as specified and as directed.

S&F Decorative Ultra Slim Linear LED Lighting Fixture 18 Watt, 4' long with Extruded AI, Heat Sink, Environmental Friendly, Energy Efficient with LED Tube 18 Watt and sutable for Fitting with all Fixing Arrangement and Accessories, Internally Pre-wired and including connecting with Twin Core Twisted Flexible Copper Conductor Cable with suitable Size upto Ceiling Rose including Taking down/out unserviceable Light Fittings, complete all as specified and as directed.

S&F Exhaust Fan 300mm Sweep with Louvers, Heavy duty, 230/240 Volt, AC supply, complete with all Accessories, connecting with and including suitable size Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed.

S&F MCB Single Pole 6 to 32 Amp, 50 Hz, 10 kA, 240 Volt, 'C' Series and connecting up, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 10 Amp to 32 Amp, 50 Hz, 10 kA, 240 Volt, 'C' Series and connecting up, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 40 Amp, 50 Hz, 10 kA, 240 Volt, 'C' Series and connecting up, complete all as specified and as directed.

S&F MCB Distribution Board, Sheet Metal Enclosure, Single Door type, Factory made with Phosphotised Powder painted, SPN, 2-way 240 Volt with 200 Amp rated Neutral Bars & Earth Bar and connecting up, complete all as specified and as directed.

S&F MCB Distribution Board, Sheet Metal Enclosure, Single Door type, Factory made with Phosphotised Powder painted, SPN, 4-way 240 Volt with 200 Amp rated Neutral Bars & Earth Bar and connecting up, complete all as specified and as directed.

M&L Street Light Fitting Bracket made out from GI Pipe 32mm Bore (dia), Light Grade, not exc. 1.20 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 40x6.0mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works, complete all as specified and as directed.

S&F Street/Security LED Lighting Fitting 1x12 Watt, IP-66 protected, complete with all Accessories, Internally Pre-wired and including connecting with PVC insulated, Twisted Flexible Copper Conductor Cable of size 16/0.20mm 3 Core, from Light Fitting to OH Conductor, complete all as specified and as directed. NOTE : Street Light Fitting Bracket will be Measured and Paid saperately under appropriate Item.

M&L House Service Bracket (Hook type) complete with GI Pipe 40mm bore (dia), Medium grade, 3.0 Metre Long with 2 No. GI 40mm bore (dia) Bend 90° and reducing in Length if required by cutting, Mild Steel Hook and Stay or Guy, fixing with and including 2 No. Mild Steel Flat Iron 40x5mm Clamps of suitable Length, cut to Length, bent to Shape, drilling Holes, and Mild Steel Bolts, Nuts and Washers including applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F Aluminium Conductor Cable of size 6.0 Sqmm Twin Core, Flat or Circular 1100 Volt grade, Heavy duty, PVC insulated, served with Inner sheathing of PVC Tape and Overall PVC sheathed in Service Connections suspended by Insulating Hangers not more than 1.00 Metre apart including 4.0mm Suspension Wire, complete all as specified and as directed.

S&F Aluminium Conductor Cable of size 10 Sqmm Twin Core, Flat or Circular 1100 Volt grade, Heavy duty, PVC insulated, served with Inner sheathing of PVC Tape and Overall PVC sheathed in Service Connections suspended by Insulating Hangers not more than 1.00 Metre apart including 4.0mm Suspension Wire, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down/out unserviceable Earthing, complete, complete all as specified and as directed.

M/S A K BROTHERS