SEWAGE CLEANING, REPAIRS TO MANHOLE, PETTY REPAIR AND DAY TO DAY COMPLAINTS OF MD AND OTM ACCN OF J-1 AND J-2 LOC UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Demolition of brick work built in cement mortar complete all as specified.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 complete all as specified.

All as per description of serial item No 02 here-in-before but except bricks complete all as specified.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified.

All as per description of serial item No 4.00 here-in-before but except bricks complete all as specified.

Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls in CM 1:4 complete all as specified.

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately)

Material and labour cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs PCC as in kerbs/covet fillet complete all as specified.

Taking down of cement plaster on brick wall of any description thickness incl racking out joints, hacking for key scrubbing down with water and prepared to receive plaster complete all as specified .

Material and labour 12 mm thick plaster in cement mortar 1:6 on fair faces brick /concrete surfaces with finished even and smooth without using extra cement in patches n.exceeding 10 sqm including two coats of oil bound distemper including prepration of new surfaces complete all as specified and directed.

Material and labour 15 mm thick plaster in cement mortar 1:4 on other than fair faces brick /concrete surfaces with finished fair and even without using extra cement in patches n.exceeding 10 sqm including two coats of cement base paint including prepration of new surfaces complete all as specified and directed.

Material and labour 15 mm thick plaster in cement mortar 1:4 on other than fair faces brick /concrete surfaces with finished fair and even without using extra cement in patches n.exceeding 10 sqm including two coats of exterior emulsion paint including prepration of new surfaces complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified

Material and labour for Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 20 mm thick in CM (1:6) complete all as specified and directed.

Material and labour for Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and directed.

Material and labour for non skid ceramic tiles/ non skid tiles coloured, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including screed bed or bedding layer 20 mm thick in CM (1:6) complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

Material and labour for glazed ceramic coloured tiles of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Material and labour for makrana White Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and ointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

Material and labour 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed.

Material and labour for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.

Material and labour for coloured cement concrete chequered tiles 250x250x22 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.

Material and labour for sand cushion 25mm thick and well ramming including watering as required complete all as specified and directed.

Material and labour for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

Material and labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded aggregate) in floor patch as directed by engr-in-charge.

Material and labour 75 mm thick PCC 1:3:6 type C-2 as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete any description in any position not otherwise specifically provided for

Material and labour for 15mm thick cement plaster in CM 1:3 with water proofing compound on wall as well as sunken floor finish even and smooth using extra cement all as specified and directed

Material and labour for Bitumen primer for use in waterproofing and dam-proofing treatmemts @ the rate of 0.3 Litre / sqm

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sqm all as specified

Supply and fixing APP based polymeric membrane minimum weighing 3.60kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Material and labour PCC 1:5:10 using broken brick agg as in mass concrete for filling of sunken floor all as specified and directed

Supply and fixing GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as in spout for sunken floor

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Supply and fixing of 12 mm thick perforated particle board / tiles for insulation and acoustic purpose, 60 X 60 cm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

Supply and fixing of anodized aluminium snap grid of size 605 X 605 mm framework for false ceiling including necessary GI wire hangers 2 mm dia for securing frame work to ceiling , and also including necessary notching and prepared holes complete all as specified and directed.

Supply and fixing PVC Wall lining 5mm thick consisting Hollow section plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as spcifed and directed.

Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quaity 'A' , complete all as specified and directed.

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets as in roof coverings.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed.

Supply and fixing for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fixing 2mm thick fibre glass reinforced tranclucent corrugated sheeting with two corrugation side lap,fixed with coach screw and washer in roof,wall etc all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n. exc 1.5 Sqm, complete all as specified

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 sqm each and removal to store complete all as specified

Taking down shutters of n.exc 1.00 sqm each, complete all as specified and directed.

Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each, complete all as specified and directed.

Taking down & refixing of shutters in same opening chowkhat window of any description n exc 1 sqm each.

Easening of door exc 1sqm but not exc 2 sqm each by making ajdustment to hinges planning the sides of doors including taking down of door and refixing if required complete all as specified.

Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required complete all as specified.

Supply and fixing 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

Supply and fixing 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

Supply and fixing 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position .

Supply and fixing 35 MM thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified.

Supply and fixing 40 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels for cupboard/shelves, commercial type on both sides complete all as specified and directed.

Supply and fixing 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I ,complete all as specified and as directed.

Supply and fixing for 30mm 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.

Supply and fixing steel window/ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter:- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf. (c) MS tower bolt 150mm long- 2 Nos per leaf. (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf. (e) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf. (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grill/ flat iron and glass panes/ wire mesh shall be measured and paid separately under respective item of this BOQ.

All as per ser item No. 61.00 but gauged shutters without sash bars.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

Supply and fixing 100mm size MS butt hinges medium weight cold rolled (zinc cromate)., complete all as specified and directed.

All as per item No. 68.00 here-in-before but in repairs

Supply and fixing aluminium anodised barrel tower bolts of extruded section 100mm long, complete all as specified and directed.

All as per item No.70.00 here-in-before but in repairs

Supply and fixing aluminium anodised handles 125mm long, complete all as specified and directed.

All as per item No.72.00 here-in-before but in repairs

Supply and fixing MS barrel tower bolts stove enamelled black with bright bolt , 200mm size,complete all as specified and directed.

All as per item No.74.00 here-in-before but in repairs

Supply and fixing MS pressed handle oval type stove enamelled black 125mm in size, complete all as specified and directed.

All as per item No.76.00 here-in-before but in repairs

Supply and fixing mild steel, sliding door bolt stove enamelled 300mm long, complete all as specified and directed.

All as per item No.78.00 here-in-before but in repairs

Supply and fixing Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

All as per item No.80.00 here-in-before but in repairs

Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

All as per item No.82.00 here-in-before but in repairs

Supply & Fixed in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open complete all as specified.

Supply and fixing for 100 mm size Hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified

All as per item No.85.00 here-in-before but in repairs

Supply and fixing in repairs 40 mm dia powder coated cup board knobs fixed with nut screws and washer of mild steel bright finish powder coated complete all as specified.

Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30 mmx 40 mm long embedded in cement mortar 1:3 and two providing new side MS clips and fixed with MS screws complete, the length of pelmet not exc 1.5 m complete all as specified.

Petty repairs to cup board (kitchen) including easining of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cup board irrespectives in numbers of shutters and drawers) complete all as specified.

All as per ser item No. 89.00 here-in-before but cupboard (bedroom) excluding drawers complete all as specified.

Supply and fixing peg set of 06 Nos mild steel chromium plated 45 cm long fixed with Mild steel screws fixed in repair complete all as specified.

Taking down carefully and re-securing gents/ ladies dressing table fixed on wall including fixing of gutties completed all as specified.

Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified.

Supply and fixing in repair steel window handle MS painted with black japan left or right side complete all as specified and directed.

Material and labour in repair 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall complete all as specified.

Supply and fixing in repair 9 mm plywood, grade BWR type BB ( No. of ply 5) fixed with screw to timber frame or shutter any thickness complete all as specified.

Supply and fixing in repair 12 mm plywood, grade BWR type BB ( No. of ply 5 ) fixed with screw to timber frame or shutter any thickness complete all as specified.

Supply and fixing 0.71 mm thick aluminium sheet as in covering to doors etc with steel screws complete all as specified.

Supply and fixing in repair 19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination complete all as specified.

Supply and fixing in repair Cabinet/cupboard with frame in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required including hinges, handle and hasp & staple. All the edges shall be covered with 2 mm thick edge bonding tape or 900 edge bent finish as per make and specification mentioned as per drawing and specification approved by engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads as directed.

supply and fix sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

Supply and fix sheet glass ordinary quality 4.0 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

Supply and fixing Figured Glass 3.0 mm thick, Pin Head type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

Supply and fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

All as per item No. 105 here-in-before but in repairs

Taking down aluminium door shutter including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.

Supply and fixing for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

Material and labour for Mortice lock, vertical type, size 100mm 4 lever Brass body, complete all as specified and directed.

Supply and fixing 5 mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and directed.

Supply and fixing 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and directed.

Supply and fixing in repair 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and directed.

Supply and fixing in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Supply and fixing in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, Complete all as specifed and directed.

Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed by Engineer in charge

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge

Supply and fixing in repair, bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply and fixing in repair Body Bib Cock (Foam Flow) with Flange of MAKE : JAGUAR, CAT No. OPP-15037PM) or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Concealed Stop Cock with Adjustable Wall Flange of MAKE : JAGUAR, CAT No. OPP-15083KPM) or equivalent model of HINDWARE/MARK suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

Supply and fixing in repair angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .

Supply and fixing in repair angular stop Cock with Wall Flange of MAKE : JAGUAR, CAT No. OPP-15053PM) or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing 15 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete, fixed in repairs, all as specified.

Supply and fixing 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.) complete, fixed in repairs, all as specified.

Supply and fixing 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

Supply and fixing in repairs PVC internal fittings for low level flushing cistern complete all as specified.

Supply & fixed in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides complete all as specified.

Supply and fixing in repair brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

Supply and fixing in repair hand shower (health faucet) with 8mm dia, 1.2 mtr long flexible tube & wall hook of MAKE : JAQUAR, CAT No. ALD-573) or equivalent model of HINDWARE/MARK (as approved), suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.

Supply and fixing in repair brass chromium plated health faucet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

Supply and fixing in repair Hand Shower 105mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system MAKE : JAQUAR, CAT No. HSH-1721) or equivalent model of HINDWARE/MARK (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repairs 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified

Supply and fixing in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type WC complete all as specified.

Supply and fixing 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and directed.

Supply and fixing pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

Supply and fixing in repair Centre Hole Basin Mixer with popup waste with 450mm long Braided Hoses of MAKE : JAGUAR, CAT No. CON-169KNB) or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

Supply and fixing in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

Supply and fixing in repair, Towel Rack with Lower Hanger of MAKE : JAQUAR, CAT No. AHS-1581H) or equivalent model of HINDWARE/MARK (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

Supply and fixing for 40 mm bore size waste coupling for steel sink/WHB/urinal etc with PVC cap complete fixed in repairs all as specified.

Supply and fixing in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same complete all as specified.

Supply and fixing Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

Supply and fixing Corner glass shelf (with bracket) of MAKE : JAQUAR, CAT No. ACN-1173) or equivalent model of HINDWARE/MARK (as approved), complete all as specified and as directed.

Supply and fixing in repairs toilet cabinet made out of white acrylic sheet 1.50 mm thick of size 450 x 300 x 90 mm with looking mirror 450 x 270 mm fixed on the shutter and with suitable shelving arrangement in replacement of existing wooden cabinet/ mirror and repairing the disturbed surface to match with existing complete all as specified. Make : Commander/ Prayag.

Supply and fixing in repair of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe complete all as directed.

Supply and fixing in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm .

Supply and fixing in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified.

Supply and fixing in repairs plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified.

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified.(Make : CERA / HINDWARE / PARRYWARE )

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Make : CERA / HINDWARE / PARRYWARE )

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete complete all as specified and directed. (Make : CERA / HINDWARE / PARRYWARE )

Supply and fixing in repair, one piece closet with integrated cistern with soft close, seat cover and twin flush fittings,fixing accessories and aceessories set of any colour of MAKE: JAQUAR, CAT No. LYS-WHT-38851S300UFSMN, complete all as specified and as directed.

Supply and fixing in repair of any dia PVC waste pipe for WHB/sink/urinal, complete all as specified.

Supply and fixing for Low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sq cm.

Supply and fixing in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bendetc. complete all as specified and directed .

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Material and labour for refixing of steel old tubing 15 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified.

Material and labour for refixing of steel old tubing 20 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified.

Supply and fixing galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed

Supply and fixing galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed

Cleaning of over head tank RCC / PVC of any description and any capacity, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form to the entire satisfaction of Engineer in charge including disconnecting, opening and reconnecting GI tubing & fittings as per site requirement complete all as specified.

Supply and fixing Rotational moulded polythene water storage tank double layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Supply and fixing Rotational moulded polythene water storage tank double layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Supply and fixing Rotational moulded polythene water storage tank double layer, ISI Marked of capacity 2000 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Supply and fixing 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

Supply and fixing Viterous china wash under counter basin of size 590x420x195 mm,oval type of MAKE : JAGUAR, CAT No. CNS-WHT-705) or equivalent model of HINDWARE/MARK (as approved ) complete as all specified and as directed.

Supply and fixing in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE : JAGUAR, CAT No. FUS-29281) or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Over Head Shower 140mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system of MAKE : JAQUAR, CAT No. OHS-1769) or equivalent model of HINDWARE/MARK (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union etc suitable for 15mm bore pipe complete all as specified and directed by the Engr-in-Charge.

Supply and fixing in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union suitable for 20mm bore pipe complete all as specified and directed by the Engr-in-Charge.

Supply & fixed in repairs GI / UPVC socket, elbow, tee, nipple, union suitable for 25mm bore dia pipe all as directed & specified

Supply and fixed in repair brass spindle for pillar cock, stop cock (Concealed), angle cock, bib cock & wall mixer cock for 15mm complete all as specified

Supply and fixed in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 20mm complete all as specified

Supply and fixing stainless steel paper holder, fixed with gutties and steel screws on wall complete, fixed in repairs, all as specified.

Supply and fixing in repair Toilet roll holder with flap of MAKE : JAQUAR, CAT No. ACN-1153N) or equivalent model of HINDWARE/MARK (as approved) complete all as specified and directed.

Supply and fixing in repairs water tank cover of any capacity and description, complete all as specified.

Cleaning blockage in rain water pipe by removing the CP grating and rodding etc & removing & cleaning and refixing old CI grating in position in cement mortar 1:6 complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

Supply and fixing 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and directed

All as per item No 183 here-in-before but 75mm -ditto-

Supply and fixing 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) branch pieces (Tee) with cement joint complete all as specified and directed

All as per item No 186 here-in-before but 75mm -ditto-

Supply and fixing 110mm bore PVC(SWR) bend/shoe of any radius, with cement joint complete all as specified and directed.

All as per item No 188 here-in-before but 75mm -ditto-

Supply and fixing 75mm bore PVC (SWR) vent cowl, complete all as specified.

Material and labour for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

Cleaning/clearing of sewer line underground mechanically of any depth by removing any type of blockage including desalting, descaling and de-chocking from drain manually using roding by any means and flushing after cleaning/clearing of sewage line. The entire sludge water shall be disposed off out of Defence land for upto 200 mm bore pipe complete all as specified and directed by Engineer-in-Charge

All as per item No 192.00 here-in-before but Exceeding 200 mm bore and upto 300 mm bore pipe

Taking off manhole cover, cleaning of manholes in use by taking out complete sludge water, solids, brick bats, polythene, silt etc complete mechanically by HCV mounted suction discharge machine, removing/disposing the entire sludge outside periphery of defence land including placing the manhole cover properly after cleaning for 1st manhole n.exc 1.00 mtr depth of any size complete all as specified and directed

All as per item No 194.00 here-in-before but Exceeding 1 mtr depth but not exceeding 2 mtr depth of any Size

All as per item No 194.0 here-in-before but Exceeding 2 mtr depth but not exceeding 3 mtr depth of any size

Material and labour of cleaning of Septic tank/soakage well etc mechanically by using suction(vacuumed) machine including getting out sludge/waste and well flushing after cleaning, removing sludge/waste to low lying area clearing the inlet and outlet pipe mouth, etc of any depth, complete all as specified and directed.

Material and labour for cleaning/removal of blockage of floor traps/Nahani traps of 75mm/100mm bore in kitchen/bathroom/toilets etc up to 1st manhole including of taking down PVC/CP grating and re-fixing the same with white cement with pigment to match the surface as before or any other associated/related complaints not mentioned under this item and will be done as directed by Engineer-in-Charge. Note:- The Traps shall be measured more than one times as per site requirement/frequently blockage.

Material and labour for cleaning/removal of blockage of IWC/EWC ‘P’/’S’ Traps and making functional up to 1st manhole or any other associated/related complaints not mentioned under this item and will be done as directed by Engineer-in-Charge. Note:- The IWC/WC shall be measured more than one times as per site requirement/frequently blockage.

Material and labour for cleaning/removal of blockage of Gully traps up to 1st manhole of any size and depth including removing RCC covers and re-fixing the same as before or any other associated/related complaints not mentioned under this item and will be done as directed by Engineer-in-Charge. Note:- The Gully Traps shall be measured more than one times as per site requirement/frequently blockage.

Taking out liquid/solid content sludge etc from sump, septic tank, manhole and soak well either manually or by pumping cleaning thoroughly including disposal of liquid/solid content out side defence area complete all as specified

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundations, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil complete all as specified.

All as per item No 202.00 here-in-before but depth exc 1.5m or part thereof in depth beyong the first 1.5M

Returning, filling including levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified.

Removing surplus spoil to a distance exc 250m but not exceeding 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified

Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or reinforced concrete) set in CM complete all as specified and directed.

Demolition and breaking up drain pipes 200 mm bore (salt glazed ware, AC or reinforced concrete) set in CM complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone agg) as in bed to drain pipes including packing under and haunching against the pipes after they are laid and tested for 200 mm bore pipe complete all as specified

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone agg) as in bed to drain pipes including packing under and haunching against the pipes after they are laid and tested for 150 mm bore pipe complete all as specified

Material and labour for reinforced concrete pipe, class NP2, laid and jointed complete with spigot and socket end bore of pipe 200mm complete all as specified

Material and labour for Salt glazed stone ware drain pipes 150 mm bore laid in trenches and jointed. Complete all as specified

Material and labour for Cutting into existing manholes for connecting new drains by cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 and making good pipe, and reforming benching as required finishing even and smooth for 150 mm bore pipe complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

Material and labour for precast RCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in cover slab set in CM 1:4 including necessary form work if required complete all as specified and directed

Mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Material and labour TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

Material and labour Cement concrete 1:4:8 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed

Material and labour for rendering 15mm thick in CM 1:4 on external wall surface finished fair and even complete all as specified and directed

Supply and fixing Steel fibre RCC manhole cover, rames medium duty circular (as per IS-12592) for clear opening 600 mm complete all as specified

Supply and fixing in repairs CI Bends (any radius) diminishing pieces or tappers 75 mm dia complete all as specified.

Supply and fixing in repairs CI Bends (any radius) diminishing pieces or tappers 100mm dia complete all as specified.

Supply and fixing in repairs cast iron sand cast pipe 75 mm dia fixed to walls etc complete all as specified.

Supply and fixing in repairs cast iron sand cast pipe 100 mm dia fixed to walls etc complete all as specified.

Supply and fixing in repairs CI 'P' traps, 100 mm dia complete all as specified.

Supply and fixing in repairs cast iron oval access door plates with nut and washers suitable for 75 mm dia CI waste pipes upto four storey height complete all as specified

Supply and fixing in repairs cast iron oval access door plates with nut and washers suitable for 100 mm dia CI waste pipes upto four storey height complete all as specified

Material and labour for salt glazed stoneware gully traps, square or round mouthed 125 x 150 mm size type 'P' including cast iron cover grating and setting and jointing to drain pipe in Cement Mortar 1:1 complete all as specified and directed

Cutting of grass, growth/ vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/ manholes in any location or condition all as specified and directed by Engineer-in-Charge

R K GOYAL & COMPANY

JAGDISH KUMAR SEHGAL