REPAIR AND MAINTENANCE OF PROTECTIVE WORKS AND ALLIED WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

Demoltion of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars, etc, excluding ashlar facing dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) but except bricks i.e. using serviceable bricks obtained from Ser item No 3.00 here-in-before complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on brick or concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping of drain complete all as specified and as directed.

Demolition of cement concrete (RCC) of any description and in any position not otherwise specifically provided for and removing the debris below or above ground level (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition of cement concrete in ground floor any thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair complete all as specified and as directed.

Material and labour fot TMT bars 10mm dia, cut to length, bend to shape required including cranking and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed.

Material and labour for precast cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in landings cover slabs (for drain cover etc) chullah hoods, chajjas water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

Material and labour 75mm thick for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in floor as sub base complete all as specified and as directed.

Material and labour for precast cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) louvers and jallies, 45mm thick (measured solid) including moulding set in cement mortar (1:4) complete all as specified and as directed.

Material and labour for chequered tiles of size 300 X 300 X 20mm thick, screed bed or bedding layer of mortar 15mm thick for finishes in cement mortar (1:4) set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 20mm graded crushed stone aggregate) as in getting proper slope / covering complete all as specified and as directed. (average thickness 50mm).

Taking down cement plaster of any description on bricks or stone walls or from concrete surfaces including racking out joints, hacking for key, scrubbing complete all as specified and as directed.

Material and labour for applying two coats of cement based paint including preparation of new plastered surfaces over one coat of primer complete all as specified and as directed.

Material and labour for preparing plastered new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M/S PRITHIVI RAJ AND SONS (BID ID -3180682)

THAPA TRADERS (BID ID -3172387)

M/S VED PAUL MAHAJAN (BID ID -3173370)

M/S Sukhmani Construction Co. (BID ID -3178370)

M/S TRIKUTA BUILDERS (BID ID -3180542)