PROVISION OF UNIT RUN CANTEEN URC AT 05 ACRES LAND UNDER CGAE BHUBANESWAR

Amount

Surface dressing not exc 15 cm deep in any type of soil complete all as specified and directed.

Excavating over areas, n exc1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, exc1.5 m deep but n.exc 3.0 mtr and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for Plain Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC M-30 DESIGN MIX as in Foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed pilesand mass concrete complete all as specified and directed.

M&L for RCC M-30 DESIGN MIX as in Beams, cantilevers, bressummers, lintels over1.5m span complete all as specified and directed.

M&L for RCC M-30 DESIGN MIX as in Columns, pillars, piers,posts and struts complete all as specified and directed.

M&L for RCC M30 DESIGN MIX as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M30 Design mix as in Chajjas, shelves complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter flat rough finished surface complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal rough finished surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressummers,lintels, cantilevers, shelvesincluding sup- ports, overhangs,etc. also splays between floors andbeams, etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surface complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items, shelves including edges flat rough finished surface complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto, all as per item No-17 hereinbefore but 5mm dia and over upto and including 10mm diain stirrups, spacers and binders complete all as specified and directed.

M&L for Brick work with fly ash bricks in one brick thick wall, straight or curvedon plan exc 6m meanradius, built in CM 1:6 complete all as specified and directed.

M&L for Brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and directed.

M&L for Rendering 15mm thick in two layer 5mm thick in CM (1:4) with WPC @2% by weight of cement over 10mm thick in CM (1:6) External on fair faces of brickwork or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for rendering 5mm thick in CM (1:3) in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply Only Liquid water proofing compound complete all as specified and directed.

M&L for Preparation of Newly plaster Surfaces & Applying Two coat of Acrylic Washable Distemper over one coats of primer over minimum 1.5mm thick wall care putty complete all as specified and directed.

M&L for Preparation of Newly plaster Surfaces & Applying Two coat of Acrylic Wasable Distemper over one coats of primer in celing complete all as specified and directed.

M&L for Preparation of Newly plaster Surfaces & Applying Two coats of Exterrior emulsion anti fungal weather coat over one coat of primer complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 over top surfaces of roof before application of APP membrane complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application over Applying evenly a tack coat of industrial bitumen 85/25 at the rate of1.2 kg per sq.m including cleaning surfaces complete all as specified.And two coat of aluminium pain over roof complete all as specified and directed.

M&L for Hardcore of stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 Type C-1 using 20mm graded stone aggregate in plinth protection complete all as specified and directed.

M&L for ATT-Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for ATT-Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed. (Area of the sub structure in contact with backfill to be measured)

M&L for ATT-Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for ATT-Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 Type D:2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L For 35mm thick PCC 1:2:4 Type B:0 using 12.5mm graded stone aggregate For level cources complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L for Marble (in any colour as approved by Eng-in-charge/GE) work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Double charged Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incluidng 15mm thick screen bed 1:4 complete all as specified and directed.

M &L for Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised paneldesign with 2mm thick MouldedPVC Sheet on the front face &2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm SS Butt hinges, with SS hinge pin, bright polished and fixed complete all as specified and directed.

S & F 125mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F for 125 mm Aluminium handles, cast type,anodised complete all as specified and directed.

M&L for Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for Powder coated Anodised aluminium window and ventilator shutters, sliding without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing M&L powder coated clips, rubber packing, anodised aluminium snap beading, screws etc. including rolling track, wheel complete all as specified and directed.

S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for Framed work ornamental such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 140mm long Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for Wash basins, Vitreous China(flat back or angle back type) of size 550x440 mm , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 500 ltr. Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 25 mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

S&F 20 mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

S&F 15 mm dia fancy type CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Brass CP mixer for mixing hot & cold water( as in Basin Mixture) screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15 mm dia fancy type CP two way Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm dia fancy type CP Angle cock , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 450mm long PVC connections 15mm size with PTMT nuts complete all as specified and directed.

S&F 20 mm outer dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene andom fittings laid in trenches / walls complete all as specified and directed.

S&F 25 mm outer dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene andom fittings laid in trenches / walls complete all as specified and directed.

M&L for Vitrified Heavy duty tiles 10 mm thick (square/ rectangular)of size 300x300 mm , area of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick scred bed in CM 1:4 complete all as specified and directed.

S&F 304 Grade bright finished Stainless Steel railing in differeent section and shape including joining to each other complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Toilet paper holder of Chromium Plated. fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

M&L for False Ceiling Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mmthick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame complete all as specified and directed. (frame work to be paid separately)

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for framed work complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stone work and precast concrete articles (Hollow Concrete Blocks) complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregateas in surface channels/benching and drains complete all as specified and directed.

M&L forPCC 1:2:4 type B0 (using 12.5mm graded stone aggregate as in coping and drains including form work complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces including Water Proofing Compound complete all as specified and directed. Note : WPC will be measured and paid separately.

M&L for 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for 150mm dia pipe Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and directed.

M&L for Mild steel TMT bars 5-10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (Binder) complete all as specified and directed.

M & L for 25 Users LLDPE Septic tank (5000 Ltrs) designed to carry sewage and sludge water ,excavation in any type of soil, sand filling 150mm thick, PCC 1:4:8 Type D:2 (using 40mm graded crushed stone aggregate) below foundation, vent shaft, connection etc including necessary removal and RFR, complete all as specified and directed. (Make : Sintex/Polycon/Oriplast/Jindal)

M & L for 1.20 m dia and 3.0m effective depth Soakage well excavation in any type of soil , PCC 1:3:6,walls of honey combed masonary with top ring of M-25 concrete including intersepting chamber and screen chamber made of brick masonary in CM 1:4 ,RCC Cover slab in M-25/SFRC cover ,inter conecting pipes of RCC /DWC complete filled with brick bats etc, complete all as shown in Drg No. TD-318 (S) Sheet No 1/1 and specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface complete all as specified and directed.(Make of wire: .(Make of wire: Finolex/Polycab/Havells. Make of PVC Conduit :-Plaza/Prestoplast/Precision)

All as per item No. 103 above but one 3 pin socket outlet 5 Amps on same board.

All as per item No. 103 above but one 3 pin socket outlet 5 Amps but on independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty.

All as per item No.103 here in before but for 6/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire.

All as per item No.103 here in before but with 4.0 sqmm cable copper for 3 pin AC socket outlet on independent board, including 4.0 sqmm copper conductor PVC insulated sheathed continuous earth wire and connecting to common earth dolly.

M&L Sub main wiring using two runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FR grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and complete all as specified and directed. Note : Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Havells , Make of PVC Conduit-Plaza/Prestoplast/Precision)

Supply and fixing of modular switch one way 6 Amps 1 Module complete all as specified and directed.

Supply and fixing of modular switch one way 16 Amps 1 Module complete all as specified and directed.

Supply & fixing modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed.

Supply & fixing modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed.

Supply and fixing white modular cover plate with frame including modular metal flush box 1 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including modular metal flush box 2 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including modular metal flush box 4 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including modular metal flush box 6 Module complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed mounted or surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete incluidng taking down old conventional light fitting complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete in replacement of old conventional light fitting complete all as specified and directed.

S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified and directed. (Make : L&T/Legrend/Havells

S&F in replacement MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified and directed. (Make : L&T/Legrend/Havells

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as apecified and directed.

S&F MCB DB made of sheet steel phosphatised, powder painted, double door with bus bar, neutral link, earth bar and din rail of TPN 12 way, 415 Volts fixed in wall, making good disturbed surfaces, complete all as specified and directed. (Make : L&T/Legrend/Havells )

S&F MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 30 kA, 415 Volts, 100 Amps complete all as specified and directed.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and Neutral (SPN) and current carrying capacity 40 to 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and Neutral (SPN) and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of Triple poles and Neutral (TPN) and current carrying capacity of 40 Amp to 100 Amps in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing LED lights fitting 1x 16W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fixing Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 25 watt.including provn of necessary connection complete all as specified and directed.

Supply and fixing GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers complete all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

S&F sheet metal enclosure with socket plug top and MCB with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp 240 Volts complete with taking down old U/S existing sheetmetal enclosure complete all as specified and directed.( Make L&T/Legrand /Havells).

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcoal dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 40 mm up to 7.5 m shall be included in cost of above item.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. Make : Bajaj/Havells/Crompton

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed.

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed.

M&L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable complete all as specified and directed. Note : Punned thickness shall be measured and paid in this item

Supply and fix MCCBs 415V, 16KA, 4 Pole, 63 Amps capacity in existing LT Panel by drilling holes to the sheet complete all as specified and directed.

Supply and lay pipe galvanized, “Medium grade”, including fittings 40 mm (1.5”) dia complete all as specified and directed.

Making connection of GI distribution branch with GI main of 50 mm size by providing and fixing reducer tee of size 50mm X 40 mm including cutting existing 50 mm size GI pipe and connecting 40 mm size GI pipe to reducer tee successfully complete all as specified and directed.

Supply and fixing 40 mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipes including taking out old unserviceable valves 40 mm dia complete all as specified and directed.

NARESH KUMAR BEHERA

RANA ENTERPRISES