Improvements at Aringar anna maligai arch arrangements in ECO park and UGD chamber arrangements in various places in ward 31

Amount

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Comp.SI.No.62-rate for 10m3

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc.,complete as per standard specification

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm. Thick well rammed watered and compacted etc.,complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cemenl four flne aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, Iaying and labour charges and all incidential charges such as water providing etc., complete as per standard specitication

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete For Super Structure in Ground Floor.

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides)

Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in G.F

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and bindinq wire also in all floors.

Plastering with CM1:5(one cement and five sand) 12mm thick10m2.

Supply and Fixing of M.S Grills with Door and Windows with one coat of Redoxide with Primer including all costs suchas welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc ,complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc., complete, in all floors.

Supplying and laying rubberized Interlocking paver block M40 grade Providing and levelling of 60mm thick high strength type conforming IS 15658 – 2007 of rubberized interlocking paver lock in size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry rubbish cushion below the uniform shap of approved non skidding surface in the top and the rate including levelling the base preparation of pavers as sub base, quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting loading unloading of laying paver block as per standard specification etc.,

Supplying, fabricating and fixing in position of Alumi. Anod .natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.5mm thick glazed door using rectangular Alu. Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al.Clips, Best double action floor springs, Aluminium Handles on both sides, floor stopper, Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beamsor Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868/1962 of Anodic fil thickness of not less than15Microns (Fifteen) for all sections.

Writing Name board and Art painting work in Anna Maligai office Entrance wall sides the rate include the cost of artist, paint scaffolding and all labour charges etc.complete..,

Providing Soak Pit arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavation for 900mm precost cement Ring 5nos filling , providing necessary pipe line arrangements eith std specification etc, complete

Supply And Fabricading of Powder Coading MS Fabrication Arch Work Including MS Plate MS Pipe With Providing To Bear Flober Fountation Work Bace plate, MS Angle, I section, T Section, Spry Painting Work With Neccesary lingting And Name Board Arrangements

Consultant Work Fees for Arch Work 2.50% of ( Arch Work )

Add GST 18%

R UDHAYA KUMAR