Provn of construction of heavy duty stone set, two high pressure washing point near bldg No P-65, 02 x elevated sentry post in B and C Sec and kota stone flooring in bldg No P-4 at Fd Wksp Coy under GE Gurdaspur.

Amount

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil.

Removing excavation material n. exc 50 mtr but not exc 100m and depositing wher directed at a level n. exe 1.5 mtr above the starting point complete all as specified and directed.

M&L excavating in trenches in loose soil, not exc 1.5 m wide and not exc 1.5m depth for foundation , etc or for shafts , wells, cesspits, manholes, pier holes, ext not exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

All as per item No 04 above but 1.5 m to 3.0m deep soft/loose soil.

M&L returning, filling including spreading, watering and well ramming in layers n.exc 25 cm thick in soft loose soil complete all as specified and directed.

M&L for hard core of broken stone/ boulders of gauge not exceeding 63 mm deposited, spread, levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for rolling and consolidating formation surfaces in cutting with 5 to 8 ton power roller complete all as specified and directed.

M&L for plain cement concrete any thick (PCC 1:2:4) ) type B-2 with 40mm graded aggregate) in surface channel, drain and mass concrete including necessary form work complete all as specified and directed.

M&L cement concrete in foundations, filling and mass concrete type D-2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in floor complete all as specified and directed.

M&L for stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed, bedded in cement mortar 1:3, 20mm thick , joints grouted in cement mortar 1:2 with an admixture of mettalic hardner, 5% by weight of cement and struck flush complete all as specified and directed.

M&L for cement concrete 1:2:4 , type B-1 (20mm graded aggregate) as in plinth protection as thickness of 50mm without using extra cement complete all as specified and directed.

M&L for brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 (20mm graded aggregate) 75mm thick as in plinth protection complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 (20mm graded aggregate) 75mm thick as in sub base complete all as specified and directed.

M&L for cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) 25mm thick as sub floor/ floors complete all as specified and directed.

M&L reinforced cement concrete (Design mix M-25) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete as specfied and directed

M&L for reinforced cement concrete (Design mix M-25) as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (Design mix M-25) as in beams, centilevers, bressummers, intels over 1.5 m span in concrete complete all as specified and directed.

M&L for reinforced cement concrete (Design mix M-25) as in column, pillars, piers, posts and struts in concrete complete all as specified and directed.

M&L for reinforced cement concrete (Design mix M-25) as in chullah hoods, stairways (except spiral staircases) including steps (square or spandril), string pieces, corriages etc complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter with fair finished surfaces complete all as specified and directed.

Form work to soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) with fair finished surfaces complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bresumers, lntels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Form work to stair cases with sloping or stepped soffits includidng risers and stringers ( excluding landing) complete all as specified and directed.

S&F 35mm thick flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. ISI Marked.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminum sliding door bolts (Aldrops) of size 16 x300mm long complete all as specified and directed.

S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/ or reveted or forged into spikes, framed guard bars, barried iron door, ladders , framed, balusters walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm, in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

M&L for ceramic glazed coloured tiles in vertical surface of size 350x250x7 mm/ 450x350x7mm thick in CM (1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm rendering complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:4) using WPC as per manufacturer instructio on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

Supply only integral waterproofing comound.

M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application by torch shield using gas burner including 100 mm side lap as in sunken portion and forroof treatment complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement- internal plaster complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and to be finished even and smooth without using extra cement- internal plaster complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling and to be finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 40mm thick brick tile laid over 15mm thick bedding layer , grouting CM(1:6) and raking and pointing with CM (1:3) with crude oil 5% wt of cement complete all as specified and directed.

M&L for sand filling under floors including watering and consolidation complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as window cill complete all as specified and directed.

S&F GI wire netting 0.90 mm dia and 12mm mesh lathing to junctions of walls and beams etc complete all as specified and directed.

M&L for two coats of synthetic enamel painting on wooden surfaces of any description over 10cm in width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surfaces over 10cm width or girth over a coat of red oxide zinc primer including preparation of surfaces complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips quality conforming to complete all as specified and directed.

All as per Srl item No 49 above but 5mm dia and over upto and includig 10mm dia in stirrups, spacers and binders.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises guaged skelton & glazed shutter including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1(four Nos for each window) including following fitting welded to frame shutter:- (i) Hold fast,150mm long of 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm - 02 Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/06 (vii) M S guard bar 12mm square bars @ 120mm C/C fixed horizontlly.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F IInd class hard wood glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

M&L for prepration of newly plastered/ un plastered surfaces on walls and applying two coats of cement based paint of shade as approved (Camoflage pattern) over a coat of primer complete all as specified and directed.

M&L for prepring of newly plastered surfaces on walls and applying two coats of oil emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed.

M&L for writing letter of figures (block, Roman, Italic or Indian) n. exc 30cm high complete as all specified and directed.

S&F GI steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F sheet glass, 4mm thick ordinary quality fixed with oil putty complete all as specified and directed.

S&F in repairs harrison rail (25mm dia), S/S with fixing brackets stops, rollers all as approved by GE.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

Taking down chowkats or frames from the opening of size exceeding 1.5 sqm but n. exc 4.0 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/ brick surface) of chowkats, hinges and two coat of synthetic enamel paint to outer surface with red oxide primer after preparation of surfaces complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed.

E/M Supply and laying cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 35 Sqmm 3.5 core complete all as specified and directed.

Excavation in trenches in soft loose soil including cuttig road surfaes n. exc 1.5 mtr wide and n. exc 1.5 m in depth for poles, stay cable, pipe etc getting out complete all as specified and directed.

Supply and lay brick common burnt sub class "B" old size and for protection of cable laid in trenches for under ground cable all as specified.

M & L sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed.

Supply and fixing MCCB of 415 V alongwith sheet metal enclosure 4 pole of capacity 63 Amps 25 KA complete all as specified and directed.

Supply and fixing of on load chang over switch 415V sheet metal enclosure 4 pole of cpaity 63 Amps complete all as specified and directed.

Supply and lay pipe galvanised " Medium class " including fittings 25mm (1") dia and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and lay pipe galvanised " Medium class " including fittings 50mm (2") dia and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for road cutting including excavation returning filling in, spreading levelling, well ramming in layers, soiling with broken boulders stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road, premix , carpeting 25mm thick using ready mix patch mate material, rolled and compaceted for road patch repair work complete all as specified and directed.

M&L for cable protection GI tubing light grade along the pole / under road/ along the wall of size 50mm bore with necessary clamps complete all as specified and directed.

M&L for gate valvees (brass insert) of dia 50mm complete all as specified and directed.

M&L for gate valvees (brass insert) of dia 25mm complete all as specified and directed.

M& L for point wiring with PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 Sqmm FRLS through and including concealed PVC conduit with fittings and PVC insulated, unsheathed copper conductor cable continious earth wire of size 1.5 sqmm, FRLS connected to common earth and modular sunken boxes for mounting of accessories complete for one light point/ fan point/ call bell point controlled by one one way switch all as specified and directed. Note :- Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES approval make of distemper is deemed to be includied in the quoted rate by contractor. One light/fan/bell point controlled by one, one way switch

All as per Srl item No 82 above but one 5 pin socket outlet 6 amps on independent board.

All as per Srl item No 82 above but one 5 pin socket outlet 6 amps on same board.

M& L for point wiring with PVC insulated, unsheathed multistranded copper conductor cable of size 2.5 Sqmm, FRLS through and including concealed PVC conduit with fittings and PVC insulated, unsheathed copper conductor cable continious earth wire of size 2.5 sqmm, FRLS connected to common earth and modular sunken boxes for mounting of accessories complete for one light point/ fan point/ call bell point controlled by one one way switch all as specified and directed. Note :- Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES approval make of distemper is deemed to be includied in the quoted rate by contractor. One light/fan/bell point controlled by one way switch

S&F modular switch 1 way, 1 modular 6 amps single pole complete all as specified and directed.

S&F modular switch 1 way, 16 amps, 1 module single pole complete all as specified and directed.

S&F modular socket , 6A / 16A - multipin combined, 2 module complete all as specified and directed.

S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet fixed on and including 02 Nos PVC square blocks suitable for and upto 1 x 18/20 W LED tube rod single sided in complete all as specified an as directed

Supply and fix ceiling fan complete with all accessories 230V 1200 mm sweep complete all as specified and directed.

S&F in replacement of modular fan regulator 2 module electronic type 5 step 100 watt, 240 volt and connecting complete all as specified and directed.

S&F lamp holder PVC body angle type including 9 watt LED bulb polycarbonate body complete all as specified and directed.

M&L ceiling rose, surface bakelite 65x 50mm three terminal all as specified and directed

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 12 module complete all as specified and directed.

S&F modular metal flush box, 3 module complete all as specified and directed.

S&F modular metal flush box, 12 module complete all as specified and directed.

S&F in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S& F in repair MCB TPN 32 Amps 'C' series complete all as specified and directed.

All as per Item Ser No 99 above but single pole and neutral 6 to 40 amps, C series complete all as specified and directed.

S&F new generation energy saving 45 watt LED building light IP 66, luminiaries withlong life versatile pressure dia-cast aluminium , housig with high power LED as lighting source and lens embeded PC cover road way luminaire complete all as specified and directed.

S&F in replacement GI pipe bracket made out of GI pipe light grade 32mm dia and bend to shape 1.5 mtr long MS clamps made out of MS flat iron of size 32mm thick with nuts & bolts, washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts & bolts etc complete all as specified and directed.

S&F sub main wiring two single core PVC insulated and unsheathed cable with stranded copper conductor of size 1.5 sqmm including fixing arrangement with wall MS clamp, nut & bolts, washers etc and incl non matalic PVC conduit including copper earth wire 1.5 sqmm complete all as specified and directed (Note :- Two run of cable and one run of PVC conduit measure as single run)

Supply and laying cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 16 Sqmm 4 core complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia ( 8 SWG) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 5 of SSR 2009( Part-I).

S&F steel water tubing galvanised 25mm dia medium grade laid in trenches/ wall including all necessary fittings complete and connecting to existing system including taking down old one all as specified and directed by Engineer-in-Charge.

S&F for gun metal gate valve dia 25mm with iron wheel head screwed both ends for GI pipe including old one of the following dia complete all as specified and directed.

Cutting existing steel tubing size 50mm dia and screwing existing steeel tubing for alterations or additions (or lengthening screw on pipe to from contractor) all as specified and directed.

Harbhajan electric co

kaushal builders