REPAIR/RE-SURFACING OF INTERNAL ROADS AT CH (CC) CMDC (CC) BH SOI AND OTHER AREA AT BASE HOSP UNDER GE E/M LUCKNOW

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces area exc 400 sqm and depth not exc 50 mm complete all as specified and directed.

Screening road metal, Chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured).

M&L for repair to pot holes of any depth not exc 1 sqm each including sweeping free from dust and mud or water scroing sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by by applying tack coat with bituminous primer using paving bitumen VG-10 grade @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 Cum of sand) including suply of premix binder and sand again well rammed, including rolling, depth of potholes n exc 30mm using paving bitumen VG 30 grade complete all as specified and directed.

M & L for 75mm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 mm to 40mm size) and second layer of grading 3 (50mm to 20mm size ) with granite trap or basalt sread rolled and consolidated to required gradient and camber complete all as specifed and directed.

M&L for preparing WBM surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 10.00 kg per 10 sqm complete all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5.00 kg per 10 sqm complete all as specified and directed.

M&L for Bituminious Premix Semi dense Asphaltic concrete 30mm consilidated thickness with 5.50% binder content by weight of Total mix, rolled and compacted to required camber and gradient using power road Roller (8 to 12 tonne) complete with paving Bitumen VG-30 complete all as specifed and directed.

S&F reflective pavement marker of yellow/red colour (Cat Eye) of size width not mor than 130mm and height not more than 20mm with micro prismatic lense in both directions having thermoplastic body with flex resistant base and abrasion resistant creamer coating, fixing to road surfaces with special adhesive and hammer nails complete all as specified and directed by Engr-in-charge

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness and 10cm wide with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

M/s Ram Singh Agarwal (BID ID -3091120)

M/s SHIVAM CONSTRUCTIONS (BID ID -3097136)

Jaya Construction (BID ID -3091300)