PROVN OF TOILET BLOCK AT EXAM HALL (VTF), PROVN OF MODULAR LABORATORY WORK STATION WHITE MARBLE TOP WITH WOODEN CABINETS AT BLDG NO E-45 (VTF), PROVN OF 01 X TOILET BLOCK WITH WASHROOMS AT EQTN TRG E And AMF AND PROVN OF 01 X TOILET BLOCK

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth & getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundations, fillings and Mass concrete complete all as specified and directed.

M&L for RCC (Design mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Design mix) M-25 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick, PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed.

Formwork for rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter complete all as specified and directed.

Formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork for rough finished surfaces to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc. complete all as specified and directed.

Formwork for rough finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work complete all as specified and directed.

Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M&L brick work with fly ash old size bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Rendering 15mm thick in CM 1:6 on brick / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete other than fair surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of newly plaster surface and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50kg cement, surface finsihed even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound only complete all as specified and directed.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning the surfaces complete all as specified and directed .

M&L for APP based polymeric membrane minimum weighing 3.50kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed.

M&L for Applying two coat of bituminous aluminium paint @ 0.20 Ltr/Sqm complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over & including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

S&F coloured Glazed ceramic tiles in vertical surfaces (300x600x7mm thick) set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces over 10 mm thick swreed bed in CM 1:4 complete all as specified and directed.

M&L 75 mm thick PCC in plinth protection and paving 1:3:6 type C-1, (using 20mm gradded stone aggregate) finishing cement concrete even and smooth in slope without using extra cement complete all as specified and directed.

M & L Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing exc 0.55 kg/ m including necessary cutting, joining cleats, glazing clips, ruber neoprene packing, 200mm long fancy handles 2 Nos in each door, heavy SS hinges-3 Nos, anodised aluminum snap beading screws, 200mm long tower bolt-2 Nos etc. and provision of mortic lock complete all as specified and directed.

S&F anodised powder coated aluminium window and ventilater shutters fixed/openable type with out sash bar of aluminium section weighing 0.55 kg/m including necessary joining cleat , glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed

S&F 4.8mm thick sheet glass, ordinary quality and glazing with beading in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thickaluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S&F butt hinges 100mm long stainless steel complete all as specified and directed.

S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 15mm bore brass WHB CP mixer chromium plated fancy type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F CP bib tap long body 15mm bore cast fency type chromium plated copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed.

S&F 20mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed.

S&F Vitreous china wash hand basin (Oval shape) white including, waste coupling and waste pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed.

S&F PVC connection fibre reinforced 600mm long with brass check nuts and PVC washers at both ends complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F CP grating (with and without hole) of size 125mm complete all as specified and directed.

S&F CP Health faucets for EWC complete all as specified and directed.

S&F CP brass soap dish complete all as specified and directed.

S&F CP brass toilet paper holder complete all as specified and directed.

S&F single towel rail 600 mm long CP brass complete all as specified and directed.

S&F towel ring CP brass complete all as specified and directed.

S&F wall mounted rectangular looking mirror 5MM thick of size 1000 mm x 600mm with double coat protection and longetivity, grounded edges for safety and silver plating on back side for better reflection and fixed to wooden plugs with chromium plated brass screws and cup screws complete all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and inlet/outlet wasout pipe complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl and fixed, complete all as specified and directed.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls/floor including clamps complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and on plateform slab like vertical surfaces in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite including 10 mm thick rendering in CM 1:4 for receiving Granite work complete all as specified and directed.

S&F vitreous china urinal half stall olymous star white including 32mm pvc waste pipe complete all as specified and directed.

Taking down wooden chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed.

Taking down steel window, ventilators of any description with all fittings of any size and shape complete all as specified and directed.

S&F 6mm thick ACP sheet interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window, ventilator frame with shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including 04 mm thick glass, SS wire mesh necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no. in each shutter) tower bolt (2no. in each shutter) complete all as specified. Note : Providing Cooler opening with shutter where required and directed by Engr-in-charge.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium grill minimum thickness 6mm of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard U-section around the opening, all complete as per requirement. Note : Providing Cooler opening & U-clip at end where required and directed by Engr-in-charge.

S&F 18/19mm thick Medium density fibre board having density between 700-800 kg/m3 , both side laminated exterior grade, fixed as in framework for cupboard and cupboard shutters including beading/side liping fancy type fixed with screws complete all as specified and directed

S&F 12mm thick Medium density fibre board having density between 700-800 kg/m3 , both side laminated exterior grade, fixed as in framework for cupboard and cupboard shutters including beading/side liping fancy type fixed with screws complete all as specified and directed

S&F Stainless steel heavy duty telescopic slider/drawer channel silver colour of length 400-600mm including screw, nuts and other necessary items complete all as specified and directed.

S&F self closing stainless steel hinges as used in cabinets complete all as specified and directed.

S&F 100mm long stainless steel barrel tower bolts fancy type of extruded section and fixed complete all as specified and directed.

S&F 100mm size stainless steel fancy type stylis handles complete all as specified and directed.

M/L for factory made 50 micron powder coated aluminium three way track sliding windows of frame size 92mm x 31.75mmx 1.5mm thickness and of shutter size 40mmx 18 ( with 9.00mm interlocking legs) x 1.45mm thick ( two shutter glazed, covering half of span of opening each and one shutter skelton covering half of span of opening) incl provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm normal dia of wire and average width of aperature 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting and fixtures/ aluminium snap beading complete all as specified Note:- (a) measurement shall be taken for clear opening ie. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be include in the above rates and no extra shall be paid.

M&L brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor.

Complete removal of existing treatment of wall, ceiling fins, chajja etc by scrapping with electric machine having vacuum machanism RPM not less than 1500, sanding pad of 80 grit of dia 7''/9'' to make surface free from smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and removing debris/ malba to low line area out side MoD land complete all as specified and directed.

M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for applying two coat of oil bound distemper incl one coat primer by using with fully automatic airless spray technology max pressure 3300 PSI with single spray gun on walls including preparation of old wall surfaces complete all as specified and as directed.

M&L for applying two coat of oil bound distemper incl one coat primer by using with fully automatic airless spray technology max pressure 3300 PSI with single spray gun in ceiling including preparation of ceiling surfaces complete all as specified and as directed.

Demolition of tiles including bedding/screed/backing plaster of any description, multiple layers or thickness in floors, walls, aprons etc laid, bedded or pointed in cement mortor complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

All as per item Srl item No 23 here-in-before but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed.

M&L for vitrified ceramic tiles dark shade double charged 10 mm thick (square/rectangular) area of eac including cutting of proper shape & size tiles exceeding 0.36 sqm but not exc 0.42 sqm in floors as highlighter etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

Dismantling wall boards(fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets any thickness, including cover fillets complete all as specified and directed.

S&F 5mm thick Prelam colour solid PVC wall panel/louvers sheet incl strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions including 32x5mm thick fillet, Solvent Cement and fixing at site including screw, nails complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including hangers of G.I. (upto 1200mm length) fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as per manufactures instructions and as directed.

S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including sqr/rectangular/circular shape cutting for fixing of ceiling lights complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Providing, cement concrete 1:2:4, type B1 (20mm graded stone agg) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) complete all as specified and directed.

S&F 20 mm/15 mm tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm[1]45gms ) complete all as specified and directed.

S&F 15 mm PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 32 mm dia solid waste pipe for wash basin/ sink/ urinal etc complete all as specified and directed.

S&F laboratory sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 460mm x 400mm x 200mm complete all as specified and directed.

S&F fancy type double layer sliding roller blind of high quality fabric including all necessary fittings/fixture as approved by GE/user at site complete all as specified and directed.

S&F Harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers including finial at end etc. complete all as specified and directed.

M&L for 18mm thick Nano-Granite in pure white colour (of any type) work (table rubbed and polished) for table top surfaces (double layer where required) fixed in 15mm cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

Providing edge moulding half/full to 18-20mm thick Granite stone any description stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

Cutting holes in half/full brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth & getting out in soft soil complete all as specified and directed.

M&L for cement concrete PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundations, fillings and Mass concrete complete all as specified and directed.

S&F 25 users LLDPE septic tank designed to carry sewage and suldge water, excavation in any type of soil, PCC 1:4:8 below foundatioin, vent shaft, connection etc complete for all as specified and directed.

S&F 30 users LLDPE septic tank designed to carry sewage and suldge water, excavation in any type of soil, PCC 1:4:8 below foundatioin, vent shaft, connection etc complete for all as specified and directed.

M&L for Precast RCC 1:2:4, Type B–1 (using 20mm graded stone aggregate) as in landings, cover slabs [for manholes etc], chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed.

Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 on brick / concrete fair faces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound only complete all as specified and directed.

M&L for PE, DWC (double wall corrugated) pipe confirming to IS 16098 Part-2 2013 pertaining structure wall plastics pining system for sewage 150 mm bore and above bore pipe SN-8 and all necessary fittings and fixtures complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping /bed blocks incl. weathering rounded or chamfered angles and throating incl. necessary form work req. complete all as specified and directed.

Extra for forming fair finishing drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds mitred/stopped ends etc complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-0 (using 12.50mm garded crushed stone aggregate) as in benching, surface channel of drain complete all as specified and directed.

Construction of Soakage well of size 2.4m x 4.50m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed. (Ref TD Drg No TD/309 Sheet 1/4 to 4/4 of HQ CE BZ).

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and directed. [Note : A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming).

Preparing new Plastered or unplastered surfaces of ceiling and applying three coat of white wash completed complete all as specified and directed.

Removal of excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Providing, cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

M&L for 8-10mm thick heavy duty outdoor matte finished ceramic tiles in any colour, size & design etc for parking, footpath, pedestrian etc and similar location, of size 300x300, jointed and pointed in neat cement slurry complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layed for tiling work (parking tile, foothpath tile, chequered tile etc) in cement mortar 1:6 complete all as specified and directed.

M&L cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) of 75 mm thick in floors complete all as specified and directed.

Taking down copper/Aluminium point wiring (light, fan, socket or power) complete,including fixtures and fittings such as switches, ceiling rose, pendent, regulators sockets, light fittiings, etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surafces on wall/floors etc.

M/L for point Wiring with PVC insulated multistranded copper conductor cable ,1100 Volt grade FRLS of size 1.5sqmm drawn in and including PVC Rigid conduit of size not less than 20mm dia with acessories (concealed) with modular metal flush box of adequate size with 3mm thick modular white plastic plate with frame (same make of switch and socket) includingh continuous 1.5 sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694.Work including plastering after providing sunk boxes and colour/white wash/Distemper with matching colour as per original specification.

One tube light/Bulb/ Bldg security light/fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

one 3 pin 5 Amp switch sockets out let point on independent board complete all as specified and directed.

one 3 pin 5 Amps switch sockets out let on the same board complete all as specified and directed.

All as per serial item No 124.01 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

All as per item No 124.01 above but 4 sqmm FRLS cable for wiring and 4 sqmm cable as earth conductor for one 15 amps switch socket out let independent board complete all as specified and directed.

S&F switch 6/10 A One way SP modular type complete all as specified and directed.

S&F Moduler socket shuttered 6A, 5 Pin combined 2 module controlled by one switch complete all as specified and directed.

S&F Switch 16 A one way SP modular type complete all as specified and directed.

S&F Moduler socket shuttered 6/16 A 6 Pin combined 3 module controlled by one switch complete all as specified and directed.

S&F electronic stepped type moduler fan regulator, AC 230 Volt, 120W complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F metal exhaust fan, 450mm sweep with lovers, AC, 230V incl making hole and plastering complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.

S&F Rigid non-metallic PVC concealed conduit 32mm inclusive of boxes (junction/terminal) all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S&F in repairs 1 module SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 20 Amps complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all concealed conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:-

One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps complete all as specified and directed.

One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per serial item No 136.01 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed

Supply and fix in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

Supply and fixing LED lamp 2 pin 9/10 watt. complete all as specified and directed.

Supply & fixing LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S&F Exhaust fan steel body AC single phase 230/240V size 300 mm sweep with blades, and louvers including hole and plastering complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed.

Supply and fix MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

M/L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wite 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on completion complete all as specified and directed.

Supply only ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CMM with min service value 6 BEE 5 star rating, with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and install Ceiling mounted cassette type 2 Ton Hot and cold AC units indoor/outdoor, rotary compressor, single phase units 220V - 240V, 50 Hz complete with cordless remote control, copper pipes indoor unit to outdoor unit , outdoor unit stand & Iron full threaded Tie rods, nut bolts for fixing of indoor Ac unit complete all as specified and directed.

Supply and fix automatic electronic voltage stabilizer of capacity 5.0 KVA having feautre such as intelligent time delay system, low and high voltage cut-off protection, latest IC technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 250V with output voltage stabilized at 220 to 240V with accuracy of +/- 2.5% complete all as specified and directed.

Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 10 sqmm 4 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc including taking down old LT UG cable complete all as specified and directed.

Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 6 sqmm 2 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc including taking down old LT UG cable complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out including foming of bottom surface for laying of cable / pipe etc in soft/loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed.

M&L for sand cushioning, spreading & levelling, watering and well ramming in layers 8 cm thick before laying the cable and 15 cm after laying the cable and then punned. After punning the thickness of sand cushioning should be 18 cm thick. Note :- Only punned thickness shall be measured for payment purpose only.

Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed.

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed.

Cutting existing GI/CI/DI water supply pipe line upto 150mm dia and inserting clamp and all fitting for alterations or additions complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia with all fitting laid in trenches complete all as specified and directed.

S&F in repairs gun metal or globe or gate valves 25 mm dia with iron wheel scewed both ends complete all as specified and directed

Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm dia with all fitting laid in trenches complete all as specified and directed.

S&F in repairs gun metal or globe or gate valves 15 mm dia with iron wheel scewed both ends complete all as specified and directed.

M/s Dev Enterprises (BID ID -3491433)

shahji contractors (BID ID -3492564)