Upgradation of 1x5MVA & 1x12.5MVA, 33/11kV Sub-station to 1x20MVA, 110/33kV & 2x20MVA, 110/11kV Sub-station at Thokkottu and construction of 110kV LILO line for a distance of 4.332km in Ullala Taluk, Dakshina Kannada District on Partial Turnkey basis

Station Mandatory Supply

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker) for 145KV CB

SF6 Gas (40% of total gas Qty. of each Sub-Station) Sub-Station at Thokkottu

Copper Contact fingers male & female (For one Complete Isolator for 145KV class)

Terminal Connector (For one Complete Isolator for 145KV Class)

Terminal Pad (For one Complete Isolator for 145KV Class)

Fabrication, Prototype Inspection and Supply of galvanised 110KV & 220kV Transmission Line Towers- Grand Total weight of Tower parts- Mild Steel

Note:(i) Rate to be quoted on per t Basis.

Fabrication, Prototype Inspection and Supply of galvanised 110KV & 220kV Transmission Line Towers- Grand Total weight of Tower parts-High Tensile Steel

Note:(i) Rate to be quoted on per t Basis.

Supply of galvanised bolts & nuts for 110KV & 220kV Towers-Grand Total weight of Bolts & Nuts

Note:(i) Rate to be quoted on per t Basis.

(ii)For detailed quantity breakup refer Techno-commercial sheet...

Fabrication, Prototype Inspection and supply of galvanised (designed based & already approved design) Steel Pole Structure (110kV DC Monopoles: (including Cross arm, base plate with anchor bolts, anti...

Tower Accessories

1.Number Plates

2.Danger Boards

3.Circuit Plate

4.Phase Plate (set of 6 Nos.)

5.Earth bond of 450mm Long

Note:(i) Added SS30 of Station Supply

(ii)For detailed quantity breakup refer Techno-commercial sheet.

i) 7/3.15mm Ground Wire

48 Fibre (DWSM) OPGW fibre Optic Cable

Insulator Strings suitable for Lynx Conductor:110kV line as per technical specifications

a. Single Tension string - 110kV, 90KN Tension type Composite polymer long rod insulators with sectional lengt...

Insulator Strings suitable for Lynx Conductor:110kV line as per technical specifications

b. Single Suspension string - 110kV, 90KN Suspension type Composite polymer long rod insulators with sectional ...

Insulator Strings suitable for Drake Conductor (220kV) as per technical specifications:

NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insulator strings sh...

Insulator Strings suitable for Drake Conductor (220kV) as per technical specifications:

B. Double Suspension insulator strings consisting of any one of the following:

a. Using Insulator string consist...

Insulator Hardware:

A.Single Tension Clamp with hardware and arcing horn suitable for Lynx ACSR and for 110kV, 90KN Tension type Composite polymer long rod insulators with sectional length-1160mm

B.Double Tension clamp with hard ware and arcing horn suitable for Lynx ACSR and for 110kV, 90KN Tension type Composite polymer long rod insulators with sectional length-1160mm

C.Single suspension Clamp with hardware and arcing horn suitable for Lynx ACSR and for 110kV, 90KN Suspension type Composite polymer long rod insulators with sectional length-1015mm

D.Double Tension clamp with hard ware & arcing horn suitable for Drake ACSR and for Insulator string consisting of 2X16nos. of Antifog Disc insulators 120kN OR Double String 220kV, 120kN Tension t...

E.Double Suspension clamp with hard ware & arcing horn suitable for Drake ACSR and for Insulator string consisting of 2X14nos. of Antifog Disc insulators 90kN OR Double String 220kV, 90kN Tension ...

Accessories for Lynx Conductor:

1.M S C Joints for Lynx Conductor

2.Repair sleeves for Lynx Conductor

3.C type Wedge connector suitable for Lynx-Lynx ACSR Conductor

4.Vibration dampers for Lynx Conductor

5.C type Wedge connector suitable for Drake-Lynx ACSR

Accessories for Drake Conductor:

1.M S C Joints for Drake Conductor

2.Repair sleeves for Drake Conductor

3.C type Wedge connector suitable for Drake-Drake Conductor

Note(i):Added SS50 of Station Supply

(ii)For detailed quantity breakup refer Techno-commercial sheet.

4.Vibration dampers for Drake Conductor

Accessories for OPGW Conductor:

1)Suspension clam assembly for 48 Fibre OPGW

2) Tension Assembly for Dead End for 48 Fibre OPGW

3) Tension Fitting assembly for 48 Fibre OPGW including all accessories for joint box (splicing location)

4) Tension assembly-Double Tension pass through for 48 Fibre OPGW

5) Tension Fitting assembly on suspension Tower 48 Fibre OPGW including all accessories for joint box (splicing location)

6) Vibration damper for 48 Fibre OPGW

7) Down lead clamp assembly for fibre OPGW

8) Joint Box for 24 Fibre OPGW

1.FODP 96F: Indoor type consisting of 2 nos of rack mounted LIUeach of 48F (to be housed in FODP) with with FCPC coupling & pigtails

Fibre Optic Approach Cable

48 fibre (DWSM)- Including installation hardware set for 48fibre aproach cable

Media Converter

Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route

duly following the route alignment, GPS Co-ordinates, submission of detailed line sche...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor

Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent...

c. Earth wire-7/3.15mm

d.Installation, testing & commissioning of 48F OPGW cable along with associated hardware fittings, Vibration dampers & joint box as per technical specification for Offline condition

Erection of Transmision Line Lattice Type Towers (including tower accessories,etc., except GI angle with Barbed wire & Grounding materials)

(i)The Bidders are required to quote the rates taking ...

Erection of 110kV DC Monopoles including Cross arm, base plate with anchor bolts, anticlimbing device, step bolts and bolt & nuts, ladder and all other equipment complete as per technical specificatio...

Tower accessories:

a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to ...

Supplying and fixing Barbed wire as per technical specifications

c.Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metrelong, salt, charcoal, including

excavation cha...

Instalation, Testing & Comissioning of FODP 48F: Indoor type rack mounted with FCPC coupling and pigtailss

Laying, installation, testing & commissioning of 48 F Optical fibre approach cable in switch yards (Including hardware)

along with HDPE Pipe

Design, developing Structural drawings, foundation drawings (for all types of soils), Shop drawings, for 110kV DC Monopoles with single sided cross arms as per technical specification:

(i) '1PS2 typ...

ii.''1PS3' type, Normal, +3Mtr and +6Mtr

iii.''1PS4'/DE(0-15 Deg) type, Normal, +3Mtr and +6Mtr

iv.''1PS4A'/DE(0-15 Deg) type, Normal, +3Mtr and +6Mtr

Proto assembly inspection and proto type testing of following of Monopoles

(i) 110kV Monopole of 1PS2(0-15 deg) will be subjected for proto type test).

ii.1PS4A(60-90 Deg/DE(0-15 deg) with +3M Body Extension) will be subjected for proto type test).

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...

Providing and constructing laterite size stone masonry including cost and conveyance of all material curing etc complete as per specifications IS 3620/1979 having compressive strength not less than ...

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.7...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, l...

Providing 15 cement plaster on rough side of single or half with cement mortor 1:4 to brick masonary including rounding off corners wherever required smooth rendering, providing and removing scaffold...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and applying painting in two coats with Acid proof paint of approved brand on wall surface to give an even shade after throughly brushing the surface free from mortar drops and other fo...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations an...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP SwitchV

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 150 sqmm Long Barrel

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.

Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC 23A duty and as per IS13947 125Amps

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying of recess mounting LED modular down light 2'x2' 36 W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 mtrs long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

Bricks: Non modular - for laying on UG cable

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 25mm including the cost of materials, labour charges, required tools and plants etc., complete. W...

Providing and applying Primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechan...

Providing and applying Tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom

Providing and laying Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix,...

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Station Erection

Power Transformer:

(i) 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, fi...

I.CIRCUIT BREAKER :

SF-6 Circuit Breaker with terminal connector suitable for Moose ACSR/Drake ACSR conductor with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structur...

II.CIRCUIT BREAKER :

SF-6 Circuit Breaker with terminal connector suitable for Moose ACSR/Drake ACSR conductor with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structu...

110kV Isolators-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

33kV Isolators-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

11kV Isolators-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

i)110kV kV class Current Transformer-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

ii)33 kV class Current Transformer-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

33kV & 11kV NCTs-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER 110kV, Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Moose ACSR Conductor and marshalling KIOSK etc., comp...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER 33kV, Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Drake ACSR Conductor and marshalling KIOSK etc., compl...

I.SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

96 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Medium

II.SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

30 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Medium

III)SURGE ARRESTOR

9kV, 10KA class station class with connector and clamp

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per technical specification for Transformers & Line- Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

iv)For 33 kV Transmission line

Erection of Station structure, Mounting Structures , Lightning Mast & Station Yard Light Structure(including Bolts & nuts) as per the directions of site Engineer -Total Weight

Note:(i) Rate to be quot...

11 kV ODS and take off structure :

Erection of Double pole structure with 9.5 Mts. RCC poles,300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing 9k...

Formation of Main/ Cross Bus with Single Moose

Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc.,

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge.110kV & 33kV side-Total

Note:For detailed quantity breakup refer...

Post insulators- Cylindrical solid core as per technical Specification

i)Solid Core Bus Post Insulator 110 kV class, 1Unit/stack.

ii)Solid Core Bus Post Insulator 33 kV class, 1Unit/stack.

Auxiliary Transformer:

Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....

Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...

A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...

B) A.C. Distribution Box (Outdoor) :

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G

MCB 16A + 1 O/G of 100A...

STATION BATTERY:

110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification

BATTERY CHARGER :

Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery charger as per technical specification.

DC Distribution Panel (Indoor)

as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...

Laying of 1.1 kV Class Armoured Aluminium Cable,Coper Control Cable along with glands/lugs/ferrules

11kV Switchgear:11kV, 25KA, 500 MVA MCVCB switchgear 1600 A for incomer and 1250 A for feeders Out door type comprising of 2IC+12F+1BC+4CB+1AP (Remote annunciation cum Control panel) with CTs & PT...

Laying of 11kV UG Cables-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

Fixing of Termination kit/Pothead for 95Sq. mm 3 Core & 400 Sq. mm 3 Core cable as per techincal specification.-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

Fixing of Termination kit/Pothead for Single Core 1000 Sqmm single Core & 400 Sq. mm 3 Core Cable as per techincal specification.-Total

Note:For detailed quantity breakup refer Techno-commercial shee...

Equipments required for establing SCADA Communication as per KPTCL Specification

Note: Satellite communication required will be arranged by SLDC

a. Site survey, wiring, installation, testing and commi...

b. Site survey, wiring, installation, testing and commissioning of DCU (DCU installation to be

done in RTU panel)

c.Wiring, Installation Testing and commissioning of UPS with batteries & cables

d.Integration of RTU, DCU and UPS with field equipments

Laying of Scada Cable along with glands/lugs/ferrules-Total

Note:For detailed quantity breakup refer Techno-commercial sheet.

Formation of Earthmat

1.Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standard with Sodium Bentonite clay as per the drawing/standard sp...

2.Supplying and erection of Grounding of equipments with 75 x 12 mm G I flat and connecting equipments to the earth mat/ground pit. Each point of earthing with all formation works like bending, twis...

3.Supply and Providing 40mm dia MS Round rod,1.075 metre long earthmat spikes including heating, bending top 50/75 mm overlap flattening and making spike edge at one end driving into the earth below t...

4.Supply and erection of Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the p...

5.Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc.,

6. Providing deep bore earthing: Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite tr...

b)40mm dia MS rod

c)Bentonite Clay

Power Transformer:

(i) 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, fi...

Nitrogen Injection fire extinguishing system-supply, erection & commissioning works etc., as per technical specification

I.CIRCUIT BREAKER :

SF-6 Circuit Breaker with terminal connector suitable for Moose ACSR/Drake ACSR conductor with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structur...

II.CIRCUIT BREAKER :

SF-6 Circuit Breaker with terminal connector suitable for Moose ACSR/Drake ACSR conductor with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structu...

I.ISOLATORS :110kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Moose ACSR conductor/ 75mm/63mm Al. tube, marshal...

ii)Upright mounting type without Earth switch. LPH 6350mm.

II.ISOLATORS :33kV, 800 A, 25 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor, marshalling box etc., comple...

ii)Upright mounting type without Earth switch. LPH 3750mm.

iii)Upright mounting type without Earth switch. LPH 4750mm.

11 kV Isolators:Total

(i)11 kV isolator, Double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR conductor

Note:For detailed quantity breakup refer Techn...

CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR / Moose ACSR conductor with marshalling box etc., complete as per techn...

ii)110 kV class, 40 KA, CT of ratio 200-100 / 1-1-1A for Transformers.

For metering : Accuracy 0.2s, Burden 10 VA

For backup protetion : Accuracy 5P20. Burden 30 VA

For differential /Distance protecti...

iii)33 kV class, 25 KA, CT of ratio 400-200 / 1-1-1A for Tr. Lines & Transformer

For metering : Accuracy 0.2s, Burden 10 VA

For backup protetion : Accuracy 5P20, Burden 30 VA

For differential /Distanc...

33kV class, 25 KA, NCT of ratio 400-200/1-1-1A for REFR protection(of similar rating and ratio as that of 33kV CT at 33kV side Transformers) with terminal connector suitable for 2 Nos of Copper fla...

11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as ...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER 110kV, Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Moose ACSR Conductor and marshalling KIOSK etc., comp...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER 33kV, Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Drakee ACSR Conductor and marshalling KIOSK etc., comp...

I.SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

96 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Medium

II.SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

30 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Medium

III)SURGE ARRESTOR

9kV, 10KA class station class with connector and clamp

Capacitor Bank:

Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable ...

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...

ii)For power transformer 110/33 kV

iii)For 110 kV Transmission line(less than 5kms)with Differential Protection

Note:Proposed differential relay at existing 110kV Jeppu Substation and proposed 110kV Thokkottu Substation shall be of sam...

iv)For 33 kV Transmission line

Fabrication, galvanising and supply of Mild Steel

of Station structures , Mounting Structures , Tubular Type Lightning Mast & Station Yard Light Structure (excluding Bolts & nuts)-Total Weight

Supply of galvanised Bolts & Nuts for Station structures , Mounting Structures , Tubular Type Lightning Mast & Station Yard Light Structure -Total Weight

Note:(i) Rate to be quoted on per t Basis

11 kV ODS and take off structure :

Supplying of Double pole structure with 9.5 Mts. RCC poles,300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing...

BUS BAR FORMATION :

i)Moose ACSR Conductor

Rigid Bus with Taps & Clamps :

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter

b) 63mm size connecting isolator to vertical tap

ii)Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110kV side

b) Expansion Type

Corona Bell suitable for Aluminium Pipe of size 75mm on 110kV

Rigid Bus with Taps & Clamps :

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter

b) 38mm size connecting isolator to vertical tap

ii)Straight/Angular taps suitable for 38mm Aluminium tube (BS-1600) 1000 mm vertical height for vertical portion and cross bus on 33 kV side with rounded off end for connecting rigid main bus to 38m...

iii) Post insulator clamps suitable for 50 mm Aluminium pipe & Post insulator solid core type - 33kV side

Corona Bell suitable for Aluminium Pipe of size 50mm on 33kV

Post insulators- Cylindrical solid core as per technical Specification

i)Solid Core Bus Post Insulator 110 kV class, 1Unit/stack.

ii)Solid Core Bus Post Insulator 33 kV class, 1Unit/stack.

a) 90kN Disc Insulators

1.Bolted Type Tension Clamp suitable for single Drake ACSR Conductor, 90KN Disc Insulators

2.Bolted Type Suspension Type Clamp suitable for single Drake ACSR Conductor, 90KN Disc Insulators

3.C Type wedge connector suitable for Moose-Lynx (Line)

5.Post insulator clamp suitable for Moose ACSR and 110kV solid core insulator

Auxiliary Transformer:

Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....

Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...

A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...

B) A.C. Distribution Box (Outdoor) :

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G

MCB 16A + 1 O/G of 100A...

LT Power Cable:1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules :

a) 1.1 kV PVC Insulated 4X95 sq.mm Aluminium cable with glands / lugs / ferrules

STATION BATTERY:

110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification

BATTERY CHARGER :

Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery charger as per technical specification.

DC Distribution Panel (Indoor)

as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...

Copper control cables:

1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per technical specificaions

i) 19 Core x 2.5 Sq.mm.

ii)10 Core x 2.5 Sq.mm.

iii) 4 Core x 6.0 Sq.mm.

iv) 4 Core x 2.5 Sq.mm.

Added SS82 of Station Supply

Note:For detailed quantity breakup refer Techno-commercial sheet.

v) 2 Core x 2.5 Sq.mm.

vi) 2 Core x 6 Sq.mm.

Added SS153 of Station Supply

Note:For detailed quantity breakup refer Techno-commercial sheet.

vii)4CoreX25 sq.mm

viii)4CoreX10 sq.mm

11kV, XLPE Insulated UG Cable as per Technical Specification

a) 11kV Single Core, 1000 sq.mm Aluminium cable To be run from 110/11 kV transformers to 11kV switchgear).

b) 3X400 sq.mm Aluminium cable (To be run from 11 kV switchgear to 11kV take off DP structure)

c)3X95 Sq.mm Aluminium Cable( To be Run from 11kV Switchgear to Auxiliary Transformer)

d)ia Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.

d)ib)Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.

d)iia) Cable Termination kits suitable for 400Sq. mm 3 Core as per techincal specification.

d) iib) Cable Termination kits suitable for 400Sq. mm 3 Core as per techincal specification.

e)iiia) Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.

e) iiib)Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.

Equipments required for establing SCADA Communication as per KPTCL Specification

Note:1. Satellite communication required will be arranged by SLDC

2.Detailed BOM & specification of SCADA Equipment sha...

b.Data Concentrator Unit (DCU)

c.2kVA online UPS (230V AC 1 phase 50Hz)

i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core

iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core

iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core

v)supply cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specfications.

vi) supply cables-1C x 32 Sq mm multistrand for battery conforming to KPTCL specification

Fire Fighting Equipments with necessary Mounting Stands

a. i. Mechanical Foam type extinguisher 50 Ltr. capacity

ii. Mechanical Foam type extinguisher 9 Ltr. capacity

b. Water type (gas pressure type) 9 Ltr. capacity

c. Carbon di-oxide type 4.5 kg Capacity

d.i Sand type G.I Buckets 15 Ltr. Capacity

ii. Steel stands for above to have 4 buckets to each stand.

MAINTENANCE TOOLS AND PLANTS

1.Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

2. Telescopic ladder Aluminium 6 Mtr. Height

3.Ring spanner set- 12Nos per Set

4.Tube spanner set- 12Nos per Set

5. Pipe wrench 24 inch

6. Pipe wrench 18 inch.

7. Hydraulic Crimping tools up to 1000 sqmm

8.Rubber hand gloves (15 kV tested)

9.Rechargeable 5W LED Hand Torch

10.Insulated cutting plier

i. 12 inch size

11.Insulated cutting plier

ii. 8 inch size

12.Line live tester

13.Screw driver 18"

14.Screw driver 12"

15. Hammer 8 lbs

16. Hammer 2 lbs

17. Chain pulley block 5 ton cap

18.Hydolic jack 5T capacity

19.Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.

21. Box spanners- 12Nos per Set

22.Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

23.Insulation Tester Digital Type (megger) 2.5kV - 5 kV

24.Insulation megger 500 V

25.SF-6 Gas leak detector

26.Multimeter electromechanical

27.Multimeter Electronic

29.DC Voltmeter range -5V to + 5V

30.Hydrometer syringe suitable for vent holes

31.Specific gravity correction chart

32.wall mounting type holder for Hydrometer

33.Thermometer with wall mounting holder

34.Rubber appron

36.Protective goggle

37.Acid resisting jars (4 pint capacity)

38. Rubber shoes knee height

39. Glass funnel

40. Grounding sticks extendable upto 18 ft : 3 nos. of

each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)

Miscellaneous items like rubber mats, first aid box, danger board, shock treatment charts, water filter door locks, fixograph, Sub station name board and other sundry items (size/capacities to be got ...

2.First aid box.

3.Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

4. Water filter / Water purifier : Wall mounting type (Aqua-guard type).

5. Sub-station name board duly painted as per specification including erection & Civil Works

6. Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

7.Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)

8. Danger board ( prohibited ) with support structure including fixing in front of the gate

9. Equipments name plates and earthing name plates including fixing at outdoor yard

Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :

1.Steel Almirahs 6 1/2 feet

2.Steel Almirahs 6 1/2 feet with glass panel doors.

3.Officer's tables

4.Steel slotted angle rack (big)

5.Steel slotted angle rack (small)

6.Steel dust bins

7.Executive Revolving chairs

8.S type arm chairs

9.Steel folding chairs

Station yard lighting (outdoor):

i)Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProo...

ii)Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...