WELCOME MAINT OF OFFR ACCN AND MISC REPAIR TO JCO/OR MD ACCN INCL PERIODICAL SERVICES AT SE FALLS AND REPAIR TO FENCING / COMPOUND WALL AND BUILDING FOR MES PUMP HOUSE AND REPAIR/CLEANING OF SEWAGE LINES AT SE FALLS UNDER GE SHILLONG

Amount

Complete removal of existing treatment on wall/ceiling/concrete surfaces with Washing, rubbing, down and stopping of distempered and painted surfaces

M&L for preparation of surfaces and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.

M & L for preparation of surfaces and preparation of surfaces and applying one coat of oil bound distemper with roller on old treated surface of wall/ Ceiling etc complete all as specified and directed.

M & L for preparation of surfaces and applying two coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enemal paint.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

M&L for preparation of old surface of brick, stone, concrete, asbestos cement or plastered surface any description over 10 cm girth or width and applying one coat plastic emulsion paint complete all as specified.

M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed.

M&L for preparation of old decorated surface on wall and applying one coat of Exterior emulsion paint ( weather coat), complete all as specified and directed.

M&L preparation of old painted steel roof surfaces, over 10cm in with or girth and applying one coat of synthetic enamel roof paint complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each including make good and all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each all as specified and directed.

Taking down shutters of any description n'exc 1.0 Sqm and refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to match on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mmB.W.P. commerical play flat on both side with feather edged all as specified and directed.

M&L for 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats comoplete all as specified and directed.

Taking down shutters of any description but not exc 1 Sqm each all as specified and directed.

M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) but n.exc 1.5 sqm each including make good and all as specified.

S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I.

S&F pre laminated solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed.

S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and directed.

S&F Extruded Aluminium, anodised, bow handles of size 100mm complete all as specified and directed.

S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed.

S&F aluminium anodised barrel bolts and fixed of 100 mm length complete all as specified and directed.

S&F for 4 leversBrass Mortice lock,vertical type,100mm length complete all as specified and directed.

S&F for 50mm dia cupboard polished hardwood knobs fixed with screws complete all as specified and directed.

S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet/cup-board completed all as specified and directed.

S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specified and directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed.

S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed.

S&F in repairs 50mm dia, cupboard polished, hard wood knobs fixed with crews and washer of mild steel, bright finished complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing in CM 1:4 complete all as specified and as directed.

M&L for Non skid light shade, joint free ceramic tiles, 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for Non skid joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over and including 10mm thick backing in CM 1:4 complete all as specified and as directed

M&L for Glazed ceramic coloured tiles in vertical surface of size 450 x 350 x 7mm/350x250x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over and including 10mm thick backing in CM 1:4 complete as specified and directed

M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed

M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/hard standing finished even and fair with 10 mm joint filled with bitumen mastic (mix of bitumen and sand at 3m intervals complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed

Supply only integral WPC (ISI Mark)

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer all as specified.

M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed.

S&F in repair 25 mm dia aluminium drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends (minimum) in one opening complete all as specified and directed.

S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including 32mm dia Brass Chromium Plated Waste Fitting, waste pipe including Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair Water closet Pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chroimum plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed.

S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs basin mixture, CP for mixing hot or cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs tubular towel rail 600mm long, D type stainless steel complete all as specified and directed.

S&F in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F in repairs Brass CP 2-in-1 Bibcock with flange complete all as specified and directed.

S&F in repairs Toilet paper roll holder with stainless steel flap complete all as specified and directed.

S&Fin repairs Towel ring sqare shape stainless steel complete all as specified and directed.

S&F in repairs corner glass shelf with bracket complete all as specified and directed.

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) complete all as specified and directed.

S&F CP Hand shower 27x27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of complete all as specified and directed.

S&F in repairs single lever sink mixer with swinging spout on upper side (wall mounted model ) with connecting legs & wall flanges complete all as specified and directed.

S&F in repairs CP wall mixer non telephonic complete all as specified and directed.

S&F Stainless steel kitchen plate rack of size 31" X 30'' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack.

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and directed.

S&F in repair Towel rack 600mm long with lower hangers, stainless steel of make jaquar complete all as specified and directed.

S&F in repair CP over head shower square shape of size 150x150mm with CP shower arm of size 400x25x25mm square shape for wall flange (without hand & over head shower) complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size complete

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete

S&F cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.

Taking up or down steel tubing and connections for 15 mm bore of pipes

Taking up or down steel tubing and connectionfor 20 mm bore of pipes

S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor

S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete

S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl dismantling of old unservicable water tank of any capacity all as specified and directed

S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs incl dismantling of old unservicable water tank of any capacity all as specified and directed

S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

S&F in repairs Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve of dia 20 mm complete all as specified and directed by Engr-in-Charge

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with wooden beading wooden surfaces/putty on iron surfaces in square n exc 0.5 sqm in each pan.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

M&L for 18/20mm thik Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete

S&F in repairs PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints, fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bend with access door of any radius 75 mm bore complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement to pipe complete all as specified and directed.

Removing existing water proofing treatment along with PVC sheets disposing off MoD premises and rendering and carry out the following works for roof treatment a) 15mm thick in CM 1:4 screed bed by hacking out the existing roof slab. b) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltrs per sqm confirming to IS:3384- 1986. c) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5kg/m² reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer. Application of APP membrane over primer shall be done by torch application. The overlap shall be minimum 100 mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. (NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer contractor shall be submitted documentary evidence in support of applicator engaged for approval of GE.)

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion, embedded in concrete and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Supply only chain link mild steel galvanised fencing of mesh size and design as approved by GE) made of GI wire not less than 3 mm dia including line wires, to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed

Fixing only chain link mild steel galvanised fencing of any mesh and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed (each line wire to be measured).

S&F 10 mm dia MS round bars of any length as in stiffener to chain link fencing fixed to fencing post complete all as specified and directed .

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil.

M&L for PCC (1:3:6), type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as specified and directed.

S&F mild steel angle iron or other sections for post and struts in fencing, flat iron fillets (for securing wire mesh etc) to fencing post, cut to shape, drilled and countersunk for screw, including cutting tops to shape as directed, drilling holes, notching for wire, embedding in concrete and screwing etc. conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and n. exc 10 cm long, diameter of neck 5 to 10 mm complete all as specified and directed.

S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 15 cm and n. exc 22.5 cm long, diameter of neck 12 mm complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed

M&L for roof truss ( framed), trussed , purlin etc. of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed.

M&L for prepration of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide/ zinc chrome primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

Excavation in trenches not exc 1.5m wide and not exc 1.50 in depth for column & wall Cum foundation and getting out in soft/loose soil.

Removing , excavated soil material exc 1.5Km and n.exc 5 KM deposited where directed at Cum a level n.exc 1.5,m from the starting point.

Returning filling in, including spreading, leveling, watering and well ramming in layers not Cum exc 25 cm in soft/loose soil, completed all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete

M&L for precast cement concrete (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting in CM (1:6) complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 (Using 20mm graded agg) solid building blocks or slabs 10cm thick (with plain or interlocking joints) setting in CM 1:4 complete all as specified and directed.

Demolition of PCC (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 1:3:46 type B2 (Using 40mm graded stone aggregate) in surface channels and drains etc. finishing surface even and smooth without using extra cement including form work complete.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L PCC 1:4:8 type C2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete.

Demolition of stone/boulder masonry in any position, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for walling random rubble uncoursed well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

All as per item no. 145 above but except stone using serviceables stones complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto courses in hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm of lime or sand stone complete all as specified and directed

M&L for precast cement concrete type C1 ( 1:3:6, using 20mm graded crushed stone aggregates) as in bond stones set in cement mortar 1:4 complete all as specified and as directed.

M&L for raised pointing to random rubble masonary uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in parapets, coping, benching, appex stone etc water trough and the like including weathering slightly rounding or chamferred angle and throating etc including necessary formwork complete as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hard standing finished even and fair laid in alterrnate bays of size not exc 2 m X 2m with construction joints and filled with joint sealing compound complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) 100mm thick as in sub base, paving etc finished even and fair complete all as specified and directed.

M&L Machine pressed precast concrete polished interlocking paver block any shape and size of approved design confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

M&L of sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Removing excavated soils to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F High density polyethylene pipes (HDPE 'B' grade) 160mm dia of pressure rating 6 kgf/cm2 laid in trenches etc complete all as specified and as directed.

M&L for Concrete bed to160mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested

S&F High density polyethylene pipes (HDPE 'B' grade) 110mm dia of pressure rating 6 kgf/cm2 laid in trenches etc complete all as specified and as directed.

M&L for Concrete bed to110mm drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in ®

Cleaning of SWG Pipe 100/150/200 mm internal dia of depth upto 1 m by rodding or by using pressure pump/manually completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out side of MOD land complete all as specified & directed by Engineer-in-Charge.

Dewatering of soak well or sewage pit of any dia and depth manually or by using pump and removal of sludge if any to a distance exc 1.5 Km but not exc 5 Km out side of MOD land complete as specified & directed by Engineer-in-Charge.

Cleaning of septic tank of any size capacity by removing sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 Km but n.exc 5 Km out of MOD land complete all as specified & directed by Engineer-in-Charge. (Note:- Measurements will be taken only after dewatering of the septic tank).

Cleaning of manholes not exceeding 1.5m depth and removing the sludge, covers and burying the waste material in borrow pits. Note:- (Cost of the borrowpit and covers refix and making good with PCC after cleaning the manholes shall be deemed to be included in the quoted rates of this item)

Cleaning of CI/RCC/PVC pipes of any dia from first floor to ground floor up to trap and 1st manhole along the wall, floor, including rodding and removing waste material to a distance not exc 50 mtr all as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required for 100 mm internal dia of pipe complete all as specified and as directed

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1:6) including necessary form work complete all as specified and directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed.

M&L 100mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in , sub-base for manholes finished even and fair or even and rough as reqd complete all as specified and directed

M/S MANOJ KUMAR BAL (BID ID -3373614)

MS GIRI AND SONS (BID ID -3376145)

M/s. V M ENTERPRISE (BID ID -3367812)

MS HO Shadap (BID ID -3376075)

S K Construction (BID ID -3375990)

M/S U.K ENTERPRISE (BID ID -3376401)

M/s SS Engineering (BID ID -3374234)