Construction of New Anganvadi building at Uppaty in Nelliyalam Municipality

Amount

Dismantling the existing Reinfroced cement concrete and removing the debries from the work site and all labour charges etc., complete as per standare specifications.

Dismantling the existing damaged brick masonary or stone masonary in cement mortar wall inluding removing the debries from the site and stacking usefull material at work site for reuse and all labour charges etc., complete as per standare specifications.

Dismantling the existing damaged plain cement concrete flooring including removel of deprices from site etc., complete as diercted by the dept officers.

Earthwork excavation in all soils and subsoils except hard rock requiring blasting with initial lead and lift as initial lead of 10.0 m and lift 0f 2.00 m including re-filling the sides of foundation in layer of 15cm. thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification.

Supplying and filling in foundation and basement with filling M- sand in layers of not more than 10 cm thick well watered rammed and con-solidated etc., complying with standard specifications

Plain Cement concrete 1:4:8 mix (one cement and four M- sand and Eight aggregate mix using 40mm size is hard blue granite metal laying in layers of not more than 15 cm thick etc., and including cost of mixing laying, curing etc., complete complying with standard specifications and as directed by the departmental engineers.

Supplying and fabricating and placing in position of M.S (or) ribbed Tar steel for all reinforced cement concrete works including cost of steel and binding wire and all labour charges for cutting and fabricaton and other incidental charges etc., complete complying with standard specification.

Reinforced cement concrete 1:1.5:3 mix (One cement one and half M- sand and three aggregate) mix for all reinfoced cement concrete works using 20 mm ISS gauge hard broken grainte machine crushed metal including cost and conveyance of all materials at site including all labour charges for concrete mixing, laying, watering, curing properly but excluding cost of steel and centering etc., complete complying with standard specifications

Providing centering for sides and so fits of R.C.C. works such as lintels, slab that beams plain surface etc., complete including shuttering upto 3.30 M height using mild steel sheet of size 90 c.m x 60 c.m and 10 gauge stifer with M.S. angles of size 25 mm x 25 mm x 3mm laid over silver w.c.wood joints of size 10 c.m. x 6 c.m. spaced at about 90 c.m. c/c and supported by casurins props of 10 c.m. to 13 c.m. dia spaced 75 c.m. centre to centre complying with as per standard specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M- sand) using new best II Class Table Moulded chamber burnt Bricks of size 9 ” x 41/2“ x 3” from approved quarry including cost and conveyance of all /materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supply, fabricating & fixing in position of M.S door /Windows / Ventilator of required of size suitable to site,condition using necessary 'L' Angles,flats,I sections covered with 18 gauge M.S.Sheet for Door and windows, including cost and conveyance of materials,all labour charges for fabrication,fixing with all furnitures fittings etc., complete as directed by departmental office

Plastering in cement mortar 1:5 mix 12mm thick using clean screened M- sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and Protecting from other damages till setting of mortar etc.complete complying with standard specification.

Plastering in cement mortar 1:4 mix 20mm thick using clean screened M- sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and Protecting from other damages till setting of mortar etc.complete complying with standard specification.

Plastering in cement mortar 1:3 mix 10mm thick using clean screened M- sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and Protecting from other damages till setting of mortar etc.complete complying with standard specification.

Paintinting two coats using approved quality and colour synthetic Emulsion paint etc complete complying with standard specification

(SD:02) Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / Fan point (For electronic Regulator) (ELECTRICAL DETAILED DATA FOR 2018-19)

(SD:138) Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet (ELECTRICAL DETAILED DATA FOR 2018-19)

(SD:125)Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (ELECTRICAL DETAILED DATA FOR 2018-19)

(SD : 65) Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 GI bearer wire for service connection mains (ELECTRICAL DETAILED DATA FOR 2018-19)

(SD:140)Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make] (ELECTRICAL DETAILED DATA FOR 2018-19)

Dadooing the sides of walls for 1.50m height from the flooring with glazed square tiles 15cm x 15cm x 6mm of best quality and colourand set in cement mortar 1:2mix and pointing with white cement nearly as directed over the plastered surface of 3m betweenfinished surface of dadooing and the plastered surface of walls-10m2SI NO 261-A

Ceramic tile Floor 600 mm x 600mmx8mm Paving the floor with palin/design (desin should be got approved by the departmental officers before purchase) ceramic tiles (colour and shade as directed) of size 450 mm x450mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three M-Sand ) 20mm thick laid in-situ and pointed with same coloured cement etc completecomplying with standard specification.

Supply and fixing of Indian type water closets of 58cm size white glazed earthen ware with P or S trap and pair of porcelain footrests with M-Sand cushion and forming flooring level around the water closets etc complete complying with standard specification

Supply and Fixinf Of Pre-Casi RCC Ringes Using RCC 1:2:4 Mix. (one cement ,two M-Sand and four Aggrigat) in cluding Supplying and erecting centering to sides and soffits including supports and strutting and steel fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete

Goods & Services Tax (GST) 18%

Marbasil Constructions (BID ID -1440218)