REPAIR TO RUNWAY, TAXI TRACK AND HELIPAD INCLUDING MAINT OF SHOULDER AND SIDE DRAIN AT MANASBAL UNDER GE 970 EWS.

Amount

M&L for preparing of bituminous surfaces of road and marking paint of approved colour, confirming to BS-3262-1989 pattern of specified broken/ continous strip 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exc 10cm wide on top surfaces of runway including cleaning/removing of existing paint strip from the runway surface, make free from dust & moisture and putting in glass beads of standard size by special applicator machine and applied hot (upto 200 to 220 degree centigrade temperature) with special applicator machine, complete all as per manufacturer's instruction and directed by Engr-in-Charge.

Preparing existing concrete/ bituminous painted surfaces/black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and flakes of old paint etc, complete all as specified and directed by Engr-in-Charge.

M&L for Painting with two coats of water based paint for making lines, arrow letters etc. On runways and other like surface with "GUIDELINE RM 164 PAINT" Road Marking paint confirming to IS : 164 :1981 specification, white/ Golden Yellow or any other shade with mechanical operated painting system, complete all as specified and as per direction of Engr-in-Charge and accordance with applicable specification.

M&L for cleaning the surface with air compressor and make the surface free from dust and other particles and apply cold polymeric bitumen emulstion (PME) @ 1.00 Ltr/Sqm in one coat after dilution with 50% water, viz in the ratio of 1.1 (Water PME) by mechanical spraying machine, complete all as specified and directed by Engr-in-Charge. Make:- Hincol (M/s Hindustan Coals Ltd) or EMULCOT (M/s LN Petro Chemical Pvt Ltd) or M/s Shell India Pvt Ltd (As approved by GE). Notes :- (a) No price ajustment shall be applicable, if excess quantities of cold polymeric bitumen emulsion is used under this item. (b) The performance guarantee certificate for two years shall be submitted by the contractor after physical completion of work. (c) The work will be carried out as per the user requirement (As time decided by the users). (d) The deployment of labour and T&P arranged on the runway shall be intimated to the contractor by 0800 hrs each day in the morning. The contractor has to provide necessary arrangement such as light etc and quote the rate accordingly for consideration late working hours at Night. Nothing will pay extra on this account.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exceeding 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed by the Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 on faces of brick work or concrete surfaces, finished the surface fair and even without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in benching, bed plates, coping and the like including formwork and finishing all exposed surface of concrete, complete all as specified and directed by Engineer-in-Charge.

M/s Nasir Rasool Dar

M/S LUCKY BUILDERS

rafiq trading co