Construction of Balance work for Residential quarters for Sectoral Officers at Lirow Kulgam (including providing of Architectural / structural consultancy service for the job)

Amount

BLOCK-A

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/10sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Manufacturing and fixing in position 450mm deep modular Cupboards/Kitchen Cabinets made out of 19 mm th. Interior grade water proof termite resistanrt block board .Shutters shall be of 19mm thick block board with all hardware like hinges, magnetic catchers , ss Hnadles , locks,Channels etc complete as per sample approved.All internal surfaces of the cabinet including shutters and shelves to be finished with 0.8mm thick white laminate/liner of approved make and shade as per design amd outer surface to be finished with 1mm thick lamination/Teak/Mica .Rate to be included providing 8mm thick BWP Ply, providing TW Lipping to exposed edges of Block Board , polishing and painting all complete.The Cupboard shall contain minimum 2 drawers and Mirror of approved brand.The Kitchen Cabinets shall contain Accessories like SS Baskets,SS Racks,Corner Units etc as per the directions of site Incharge (Face Area)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including scaffolding etc.

Making of mouldings and cornices with plaster of Paris (POP) of required pattern and design as per the drawings or directed by the site incharge at the edges of walls 100mm wide.The rate shall include the cost of material.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing fly proof wire gauze to windows, clerestory windows,Gable Windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo wood

Providing and fixing of 12 mm Ply of approved brand and manufacture ISI Marked including cost of nails , screws etc complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt shutters in mm per sqm hinfges bright finished of required size with necessary screws. First Class Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class Kail wood Note:The pattern and design of the panels shall be decided by the site Incharge/as per Arch. Drawings

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing of float glass panes with budloo wooden beading of required width fixed with nails complete(Glass panes to be measured in fitted and finished form)

4mm thick

5.5mm thick

Providing and fixing of Aluminium Hardware items and accessories:

Tower Bolts 100x10 mm

Tower Bolts 150x10 mm

Handles 100mm

Handles 125mm

Aldrops

I Hooks

Single Rubber Door Stopper

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Marble work gang saw cut (polished and machine cut) for wall lining/Floor in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar f2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately) complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble/Cat Grey Marble 18mm thick

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any color or shape 18mm thick

Area of slab over 0.5 sqm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Providing and laying Vitrified tiles in floor with different sizes with min thickness 12mm , with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with stainless steel plug 40 mm, including cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing CP Brass Single lever telephonic wall mixer/Sink Mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Brand: Jaquar/Hindware/Cera or Equivalent

P/F of storage type hot water heater (Geyser) with copper container , insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable 3 pin plug top at the outlet (Venus, Havelles , Racold or Equivalent )

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Brand: Jaquar/Cera/Hindware or Equ.

Providing and fixing of stainless steel grating ISI marked of approved brand and manufacture

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Brand: Jaquar/cera/Hindware or Equ.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, incl. C.P. long bend with all fittings and fixtures complete: 10 liter capacity -White Brand: Jaquar/Hindware/Cera or equivalent

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex / Comfort or Equivalent)

Providing and fixing G.I. pipes of approved brand complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

20mm nominal bore

Providing and fixing water tank nipples incl. necessary fittings

20mm dia

Providing and fixing of sanitary soil and waste water PVC pipes (Prince B Type or Finolex ) of variable diameter with proper alignment incl. jointing with solvent complete job

100mm uPVC Pipe

P/f of following PVC fittings and accessories incl. jointing by solvent

Door Tee

Cowel

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 and with crushed stone agg.

Supply , fixing , laying and jointing of insulation for various G.I. pipeline using suitable foam exposed to environmental effects

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminum paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia

Making Plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including the finishing the top smooth incl. curing

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing of Geyser Bolts/Dach Fastners of required Dia including necessary nuts and Rawal plugs etc all complete

Providing and fixing of stainless steel Railing made of Hollow tubes ,Pipes, channels , plates,top rail etc including welding , grinding , buffing , polishing and making curvature (whereveer required) and fitting the same with necessary steel nuts and bolts complete including fixing the Railing with necessary accessories and stainless steel dash fastners , stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engg incharge

Providing and fixing of stainless Steel Newel Post including all accessories and fittings etc all complete

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length 2nd Class deodar wood

Providing and fixing of two track two panel sliding door arrangement with necessary nut bolts , screws , sliding Channels/ rollers (5mm th) and other hardware fittings etc all complete(Size11'x3"x2")

Providing and fixing of water pump 1.5HP incl. starter and all accessories and necessary fittings with fire alarming system for overflow incl. floating ball valve (Crompton, Greaves or Kirloskar or Eq make)

BLOCK-B

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/10sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Manufacturing and fixing in position 450mm deep modular Cupboards/Kitchen Cabinets made out of 19 mm th. Interior grade water proof and termite resistanrt block board .Shutters shall be of 19mm thick block board with all hardware like hinges, magnetic catchers , ss Hnadles , locks etc complete as per sample approved.All internal surfaces of the cabinet including shutters and shelves to be finished with 0.8mm thick white laminate/liner of approved make and shade as per design amd outer surface to be finished with 1mm thick lamination/Teak/Mica .Rate to be included providing 8mm thick BWP Ply, providing TW Lipping to exposed edges of Block Board , polishing and painting all complete.The Cupboard shall contain minimum 2 drawers and Mirror of approved brand.The Kitchen Cabinets shall contain Accessories like SS Baskets,SS Racks,Corner Units etc as per the directions of site Incharge (Face Area)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including scaffolding etc

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Making of mouldings and cornices with plaster of Paris (POP) of required pattern and design as per the drawings or directed by the site incharge at the edges of walls 100mm wide.The rate shall include the cost of material.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing fly proof wire gauze to windows, clerestory windows,Gable Windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo wood

Providing and fixing of 12 mm Ply of approved brand and manufacture ISI Marked including cost of nails , screws etc complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinfges bright finished of required size with necessary screws. First Class Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class Kail wood Note:The pattern and design of the panels shall be decided by the site Incharge/as per Arch. Drawings

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing of float glass panes with budloo wooden beading of required width fixed with nails complete(Glass panes to be measured in fitted and finished form)

4mm thick

5.5mm thick

Providing and fixing of Aluminium Hardware items and accessories:

Tower Bolts 100x10 mm

Tower Bolts 150x10 mm

Handles 100mm

Handles 125mm

Aldrops

I Hooks

Single Rubber Door Stopper

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Marble work gang saw cut (polished and machine cut) for wall lining/Floor in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar f2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately) complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble/Cat Grey Marble 18mm thick

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any color or shape 18mm thick

Area of slab over 0.5 sqm

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Providing and laying Vitrified tiles in floor with different sizes with min thickness 12mm , with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with stainless steel plug 40 mm, including cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing CP Brass Single lever telephonic wall mixer/Sink Mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Brand: Jaquar/ Hindware/ Cera or Equivalent

P/F of storage type hot water heater (Geyser) with copper container , insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable 3 pin plug top at the outlet (Venus, Havelles , Racold or Equivalent )

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Brand: Jaquar/Cera/Hindware or Equ.

Providing and fixing of stainless steel grating ISI marked of approved brand and manufacture

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Brand: Jaquar/ cera/ Hindware or Equ.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, incl. C.P. long bend with all fittings and fixtures complete: 10 liter capacity -White Brand: Jaquar/ Hindware/ Cera or equivalent

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex / Comfort or Equivalent)

Providing and fixing G.I. pipes of approved brand complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

20mm nominal bore

Providing and fixing water tank nipples incl. necessary fittings

20mm dia

Providing and fixing of sanitary soil and waste water PVC pipes (Prince B Type or Finolex ) of variable diameter with proper alignment incl. jointing with solvent complete job

100mm uPVC Pipe

P/f of following PVC fittings and accessories incl. jointing by solvent

Door Tee

Cowel

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Brand: Jaquar/ Hindware/ Cera

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supply , fixing , laying and jointing of insulation for various G.I. pipeline using suitable foam exposed to environmental effects

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminum paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia

Making Plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including the finishing the top smooth incl. curing

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing of Geyser Bolts of required Dia including necessary nuts and Rawal plugs etc all complete

Providing and fixing of stainless steel Railing made of Hollow tubes ,Pipes, channels , plates,top rail etc including welding , grinding , buffing , polishing and making curvature (whereveer required) and fitting the same with necessary steel nuts and bolts complete including fixing the Railing with necessary accessories and stainless steel dash fastners , stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engg incharge

Providing and fixing of stainless Steel Newel Post including all accessories and fittings etc all complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing glass strips in joints of cement concrete floors 40 mm wide and 4 mm thick

Earth work in bulk excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying stone soling tightly hand packed including watering , compacting all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete. Beams, plinth beams, girders, bressumers, centilevers, suspended floor lintels roofs and staircases including spiral staircases, shelves etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Dry random rubble masonry with hard Nallah stone in foundation and plinth: Using Quarry stone Without bond stone

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length 2nd Class Deodar Wood

Providing and fixing of two track two panel sliding door arrangement with necessary nut bolts , screws , sliding Channels/ rollers (5mm thick) and other hardware fittings etc all complete (Size: 11'x3"x2")

Providing and fixing of water pump 1.5HP incl. starter and all accessories and necessary fittings with fire alarming sytem incl. floating ball valve (Crompton,Greaves or Kirloskar or Eq make)

BLOCK-C

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/10sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Manufacturing and fixing in position 450mm deep modular Cupboards/Kitchen Cabinets made out of 19 mm th. Interior grade water proof and termite resistant block board .Shutters shall be of 19mm thick block board with all hardware like hinges, magnetic catchers , ss Hnadles , locks etc complete as per sample approved.All internal surfaces of the cabinet including shutters and shelves to be finished with 0.8mm thick white laminate/liner of approved make and shade as per design amd outer surface to be finished with 1mm thick lamination/Teak/Mica .Rate to be included providing 8mm thick BWP Ply, providing TW Lipping to exposed edges of Block Board , polishing and painting all complete.The Cupboard shall contain minimum 2 drawers and Mirror of approved brand.The Kitchen Cabinets shall contain Accessories like SS Baskets,SS Racks,Corner Units etc as per the directions of site Incharge (Face Area)

15mm Cement plaster on the rough side of single or half brick wall of mix including scaffolding etc 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Making of mouldings and cornices with plaster of Paris (POP) of required pattern and design as per the drawings or directed by the site incharge at the edges of walls 100mm wide.The rate shall include the cost of material.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing fly proof wire gauze to windows, clerestory windows,Gable Windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded Crushed stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo wood

Providing and fixing of 12 mm Ply of approved brand and manufacture ISI Marked including cost of nails , screws etc complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinfges bright finished of required size with necessary screws. First Class Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class Kail wood Note:The pattern and design of the panels shall be decided by the site Incharge/as per Arch. Drawings

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing of float glass panes with budloo wooden beading of required width fixed with nails complete(Glass panes to be measured in fitted and finished form)

4mm thick

5.5mm thick

Providing and fixing of Aluminium Hardware items and accessories:

Tower Bolts 100x10 mm

Tower Bolts 150x10 mm

Handles 100mm

Handles 125mm

Aldrops

I Hooks

Single Rubber Door Stopper

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Marble work gang saw cut (polished and machine cut) for wall lining/Floor in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar f2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately) complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble/Cat Grey Marble 18mm thick

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any color or shape 18mm thick

Area of slab over 0.5 sqm

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Providing and laying Vitrified tiles in floor with different sizes with min thickness 12mm , with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with stainless steel plug 40 mm, including cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing CP Brass Single lever telephonic wall mixer/Sink Mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Brand: Jaquar/ Hindware/ Cera or Equivalent

P/F of storage type hot water heater (Geyser) with copper container , insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable 3 pin plug top at the outlet (Venus, Havelles , Racold or Equivalent )

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Brand: Jaquar/Cera/Hindware or Equ.

Providing and fixing of stainless steel grating ISI marked of approved brand and manufacture

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Brand: Jaquar/cera/Hindware or Equ.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, incl. C.P. long bend with all fittings and fixtures complete: 10 liter capacity -White Brand: Jaquar/Hindware/Cera or equivalent

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex / Comfort or Equivalent)

Providing and fixing G.I. pipes of approved brand complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

20mm nominal bore

Providing and fixing water tank nipples incl. necessary fittings

20mm dia

Providing and fixing of sanitary soil and waste water PVC pipes (Prince B Type or Finolex ) of variable diameter with proper alignment incl. jointing with solvent complete job

100mm uPVC Pipe

P/f of following PVC fittings and accessories incl. jointing by solvent

Floor Trap

P Trap

Door Bend

Door Tee

Cowel

P/f of uPVC Pipe 40mm dia including nessary fittings and fixtures

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Brand: Jaquar/ Hindware/ Cera

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 and with crushed stone agg.

Supply , fixing , laying and jointing of insulation for various G.I. pipeline using suitable foam exposed to environmental effects

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminum paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia

Making Plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including the finishing the top smooth incl. curing

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing of Geyser Bolts of required Dia including necessary nuts and Rawal plugs etc all complete

Providing and fixing of stainless steel Railing made of Hollow tubes ,Pipes, channels , plates,top rail etc including welding , grinding , buffing , polishing and making curvature (whereveer required) and fitting the same with necessary steel nuts and bolts complete including fixing the Railing with necessary accessories and stainless steel dash fastners , stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engg incharge

Providing and fixing of stainless Steel Newel Post including all accessories and fittings etc all complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size crushed stone aggregate.

Providing and fixing glass strips in joints of cement concrete floors 40 mm wide and 4 mm thick

Earth work in excavation by manual/ mechanical means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying stone soling tightly hand packed including watering , compacting all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Columns, pillars, piers, abutments, posts and struts

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete. Beams, plinth beams, girders, bressumers, centilevers, suspended floor lintels roofs and staircases including spiral staircases, shelves etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Dry random rubble masonry with hard Nallah stone in foundation and plinth: Using Quarry stone Without bond stone

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and fixing of color coated corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain color coated G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valleys of 90cm wide overall in plain color coated G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 300 gram/m2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length 2nd Class Deodar Wood

Providing and fixing of two track two panel sliding door arrangement with necessary nut bolts , screws , sliding Channels/ rollers (5mm th) and other hardware fittings etc all complete (Size: 11'x3"x2")

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Providing and fixing of water pump 1.5HP incl. starter and all accessories and necessary fittings with fire alarming sytem incl. floating ball valve (Crompton,Greaves or Kirloskar or Eq make)

BLOCK-D

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/10sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Manufacturing and fixing in position 450mm deep modular Cupboards/Kitchen Cabinets made out of 19 mm th. Interior grade water proof and termite resistanrt block board .Shutters shall be of 19mm thick block board with all hardware like hinges, magnetic catchers , ss Hnadles , locks etc complete as per sample approved.All internal surfaces of the cabinet including shutters and shelves to be finished with 0.8mm thick white laminate/liner of approved make and shade as per design amd outer surface to be finished with 1mm thick lamination/Teak/Mica .Rate to be included providing 8mm thick BWP Ply, providing TW Lipping to exposed edges of Block Board , polishing and painting all complete.The Cupboard shall contain minimum 2 drawers and Mirror of approved brand.The Kitchen Cabinets shall contain Accessories like SS Baskets,SS Racks,Corner Units etc as per the directions of site Incharge (Face Area)

15mm Cement plaster on the rough side of single or half brick wall of mix including scaffolding etc 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Making of mouldings and cornices with plaster of Paris (POP) of required pattern and design as per the drawings or directed by the site incharge at the edges of walls 100mm wide.The rate shall include the cost of material.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing fly proof wire gauze to windows, clerestory windows,Gable Windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo wood

Providing and fixing of 12 mm Ply of approved brand and manufacture ISI Marked including cost of nails , screws etc complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinfges bright finished of required size with necessary screws. First Class Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class Kail wood Note:The pattern and design of the panels shall be decided by the site Incharge/as per Arch. Drawings

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing of float glass panes with budloo wooden beading of required width fixed with nails complete(Glass panes to be measured in fitted and finished form)

4mm thick

5mm thick

Providing and fixing of Aluminium Hardware items and accessories:

Tower Bolts 100x10 mm

Tower Bolts 150x10 mm

Handles 100mm

Handles 125mm

Aldrops

I Hooks

Single Rubber Door Stopper

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Marble work gang saw cut (polished and machine cut) for wall lining/Floor in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar f2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately) complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble/Cat Grey Marble 18mm thick

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any color or shape 18mm thick

Area of slab over 0.5 sqm

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Providing and laying Vitrified tiles in floor with different sizes with min thickness 12mm , with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with stainless steel plug 40 mm, including cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing CP Brass Single lever telephonic wall mixer/Sink Mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Brand: Jaquar/Hindware/Cera or Equivalent

P/F of storage type hot water heater (Geyser) with copper container , insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable 3 pin plug top at the outlet (Venus, Havelles , Racold or Equivalent )

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Brand: Jaquar/Cera/Hindware or Equ.

Providing and fixing of stainless steel grating ISI marked of approved brand and manufacture

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Brand: Jaquar/cera/Hindware or Equ.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, incl. C.P. long bend with all fittings and fixtures complete: 10 liter capacity -White Brand: Jaquar/Hindware/Cera or equivalent

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex / Comfort or Equivalent)

Providing and fixing G.I. pipes of approved brand complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

20mm nominal bore

Providing and fixing water tank nipples incl. necessary fittings

20mm dia

Providing and fixing of sanitary soil and waste water PVC pipes (Prince B Type or Finolex ) of variable diameter with proper alignment incl. jointing with solvent complete job

100mm uPVC Pipe

P/f of following PVC fittings and accessories incl. jointing by solvent

Floor Trap

P Trap

Door Bend

Door Tee

Cowel

P/f of uPVC Pipe 40mm dia including nessary fittings and fixtures

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Brand:Jaquar/Hindware/Cera

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 and with crushed stone agg

Supply , fixing , laying and jointing of insulation for various G.I. pipeline using suitable foam exposed to environmental effects

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminum paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia

Making Plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including the finishing the top smooth incl. curing

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing of Geyser Bolts/Dash Fastners of required Dia including necessary nuts and Rawal plugs etc all complete

Providing and fixing of stainless steel Railing made of Hollow tubes ,Pipes, channels , plates,top rail etc including welding , grinding , buffing , polishing and making curvature (whereveer required) and fitting the same with necessary steel nuts and bolts complete including fixing the Railing with necessary accessories and stainless steel dash fastners , stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engg incharge

Providing and fixing of stainless Steel Newel Post including all accessories and fittings etc all complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing glass strips in joints of cement concrete floors 40 mm wide and 4 mm thick

Earth work in bulk excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying stone soling tightly hand packed including watering , compacting all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete. Beams, plinth beams, girders, bressumers, centilevers, suspended floor lintels roofs and staircases including spiral staircases, shelves etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Dry random rubble masonry with hard Nallah stone in foundation and plinth:Using Quarry stone Without bond stone

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and fixing Color Coated corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 300 gram/m2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length 2nd Class Deodar wood

Providing and fixing of two track two panel sliding door arrangement with necessary nut bolts , screws , sliding Channels/ rollers (5mm th) and other hardware fittings etc all complete (Size: 11'x3"x2")

Providing and fixing of water pump 1.5HP incl. starter and all accessories and necessary fittings with fire alarming sytem incl. floating ball valve (Crompton,Greaves or Kirloskar or Eq make)

BLOCK-E

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/10sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Manufacturing and fixing in position 450mm deep modular Cupboards/Kitchen Cabinets made out of 19 mm th. Interior grade water proof and termite resistanrt block board .Shutters shall be of 19mm thick block board with all hardware like hinges, magnetic catchers , ss Hnadles , locks etc complete as per sample approved.All internal surfaces of the cabinet including shutters and shelves to be finished with 0.8mm thick white laminate/liner of approved make and shade as per design amd outer surface to be finished with 1mm thick lamination/Teak/Mica .Rate to be included providing 8mm thick BWP Ply, providing TW Lipping to exposed edges of Block Board , polishing and painting all complete.The Cupboard shall contain minimum 2 drawers and Mirror of approved brand.The Kitchen Cabinets shall contain Accessories like SS Baskets,SS Racks,Corner Units etc as per the directions of site Incharge (Face Area)

15mm Cement plaster on the rough side of single or half brick wall of mix including scaffolding etc 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Making of mouldings and cornices with plaster of Paris (POP) of required pattern and design as per the drawings or directed by the site incharge at the edges of walls 100mm wide.The rate shall include the cost of material.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing fly proof wire gauze to windows, clerestory windows,Gable Windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo wood

Providing and fixing of 12 mm Ply of approved brand and manufacture ISI Marked including cost of nails , screws etc complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinfges bright finished of required size with necessary screws. First Class Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class Kail wood Note:The pattern and design of the panels shall be decided by the site Incharge/as per Arch. Drawings

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing of float glass panes with budloo wooden beading of required width fixed with nails complete(Glass panes to be measured in fitted and finished form)

4mm thick

5.5mm thick

Providing and fixing of Aluminium Hardware items and accessories:

Tower Bolts 100x10 mm

Tower Bolts 150x10 mm

Handles 100mm

Handles 125mm

Aldrops

I Hooks

Single Rubber Door Stopper

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Marble work gang saw cut (polished and machine cut) for wall lining/Floor in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar f2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately) complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble/Cat Grey Marble 18mm thick

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any color or shape 18mm thick

Area of slab over 0.5 sqm

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Providing and laying Vitrified tiles in floor with different sizes with min thickness 12mm , with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with stainless steel plug 40 mm, including cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing CP Brass Single lever telephonic wall mixer/Sink Mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Brand: Jaquar/Hindware/Cera or Equivalent

P/F of storage type hot water heater (Geyser) with copper container , insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable 3 pin plug top at the outlet (Venus, Havelles , Racold or Equivalent )

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Brand: Jaquar/Cera/Hindware or Equ.

Providing and fixing of stainless steel grating ISI marked of approved brand and manufacture

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Brand: Jaquar/cera/Hindware or Equ.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, incl. C.P. long bend with all fittings and fixtures complete: 10 liter capacity -White Brand: Jaquar/Hindware/Cera or equivalent

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex / Comfort or Equivalent)

Providing and fixing G.I. pipes of approved brand complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20mm nominal bore

Providing and fixing water tank nipples incl. necessary fittings 20mm dia

Providing and fixing of sanitary soil and waste water PVC pipes (Prince B Type or Finolex ) of variable diameter with proper alignment incl. jointing with solvent complete job

100mm uPVC Pipe

P/f of following PVC fittings and accessories incl. jointing by solvent

Floor Trap

P Trap

Door Bend

Door Tee

Cowel

P/f of uPVC Pipe 40mm dia including nessary fittings and fixtures

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Brand: Jaquar/Hindware/Cera

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 and with c rushed stone agg

Supply , fixing , laying and jointing of insulation for various G.I. pipeline using suitable foam exposed to environmental effects

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminum paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia

Making Plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including the finishing the top smooth incl. curing

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing of Geyser Bolts/Dsh Fstners of required Dia including necessary nuts and Rawal plugs etc all complete

Providing and fixing of stainless steel Railing made of Hollow tubes ,Pipes, channels , plates,top rail etc including welding , grinding , buffing , polishing and making curvature (whereveer required) and fitting the same with necessary steel nuts and bolts complete including fixing the Railing with necessary accessories and stainless steel dash fastners , stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engg incharge

Providing and fixing of stainless Steel Newel Post including all accessories and fittings etc all complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing glass strips in joints of cement concrete floors 40 mm wide and 4 mm thick

Earth work in bulk excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying stone soling tightly hand packed including watering , compacting all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete. Beams, plinth beams, girders, bressumers, centilevers, suspended floor lintels roofs and staircases including spiral staircases, shelves etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Dry random rubble masonry with hard Nallah stone in foundation and plinth: Without bond stone

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and fixing Color Coated corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain color coated G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valleys of 90cm wide overall in plain color coated G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 300 gram/m2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length 2nd Class Deodar Wood

Providing and fixing of two track two panel sliding door arrangement with necessary nut bolts , screws , sliding Channels/ rollers (5mm th) and other hardware fittings etc all complete (Size: 11'x3"x2")

Providing and fixing of water pump 1.5HP incl. starter and all accessories and necessary fittings with fire alarming sytem incl. floating ball valve (Crompton,Greaves or Kirloskar or Eq make)

BLOCK-F

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/10sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Manufacturing and fixing in position 450mm deep modular Cupboards/Kitchen Cabinets made out of 19 mm th. Interior grade water proof both and termite resistanrt block board .Shutters shall be of 19mm thick block board with all hardware like hinges, magnetic catchers , ss Hnadles , locks etc complete as per sample approved.All internal surfaces of the cabinet including shutters and shelves to be finished with 0.8mm thick white laminate/liner of approved make and shade as per design amd outer surface to be finished with 1mm thick lamination/Teak/Mica .Rate to be included providing 8mm thick BWP Ply, providing TW Lipping to exposed edges of Block Board , polishing and painting all complete.The Cupboard shall contain minimum 2 drawers and Mirror of approved brand.The Kitchen Cabinets shall contain Accessories like SS Baskets,SS Racks,Corner Units etc as per the directions of site Incharge (Face Area)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including scaffolding etc

Making of mouldings and cornices with plaster of Paris (POP) of required pattern and design as per the drawings or directed by the site incharge at the edges of walls 100mm wide.The rate shall include the cost of material.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing fly proof wire gauze to windows, clerestory windows,Gable Windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo wood

Providing and fixing of 12 mm Ply of approved brand and manufacture ISI Marked including cost of nails , screws etc complete

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinfges bright finished of required size with necessary screws. First Class Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class Kail wood Note:The pattern and design of the panels shall be decided by the site Incharge/as per Arch. Drawings

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing of float glass panes with budloo wooden beading of required width fixed with nails complete(Glass panes to be measured in fitted and finished form)

4mm thick

5.5mm thick

Providing and fixing of Aluminium Hardware items and accessories:

Tower Bolts 100x10 mm

Tower Bolts 150x10 mm

Handles 100mm

Handles 125mm

Aldrops

I Hooks

Single Rubber Door Stopper

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Marble work gang saw cut (polished and machine cut) for wall lining/Floor in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar f2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately) complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble/Cat Grey Marble 18mm thick

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any color or shape 18mm thick

Area of slab over 0.5 sqm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Providing and laying Vitrified tiles in floor with different sizes with min thickness 12mm , with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with stainless steel plug 40 mm, including cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing CP Brass Single lever telephonic wall mixer/Sink Mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Brand: Jaquar/Hindware/Cera or Equivalent

P/F of storage type hot water heater (Geyser) with copper container , insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable 3 pin plug top at the outlet (Venus, Havelles , Racold or Equivalent )

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Brand: Jaquar/Cera/Hindware or Equ.

Providing and fixing of stainless steel grating ISI marked of approved brand and manufacture

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Brand: Jaquar/cera/ Hindware or Equ.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, incl. C.P. long bend with all fittings and fixtures complete: 10 liter capacity -White Brand: Jaquar/Hindware/Cera or equivalent

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex / Comfort or Equivalent)

Providing and fixing G.I. pipes of approved brand complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

20mm nominal bore

Providing and fixing water tank nipples incl. necessary fittings

20mm dia

Providing and fixing of sanitary soil and waste water PVC pipes (Prince B Type or Finolex ) of variable diameter with proper alignment incl. jointing with solvent complete job

100mm uPVC Pipe

P/f of following PVC fittings and accessories incl. jointing by solvent

Door Tee

Cowel

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supply , fixing , laying and jointing of insulation for various G.I. pipeline using suitable foam exposed to environmental effects

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminum paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia

Making Plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including the finishing the top smooth incl. curing

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Providing and fixing of Geyser Bolts/Dash Fastners of required Dia including necessary nuts and Rawal plugs etc all complete

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length 2nd class deodar wood

Providing and fixing of two track two panel sliding door arrangement with necessary nut bolts , screws , sliding Channels/ rollers (5mm th) and other hardware fittings etc all complete (Size: 11'x3"x2")

Providing and fixing of water pump 1.5HP incl. starter and all accessories and necessary fittings with fire alarming sytem incl. floating ball valve (Crompton,Greaves or Kirloskar or Eq make)

SITE DEVELOPMENT

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed All kinds of soil

Add Architectural / Structural Consultancy