REPAIR TO BLDG NO P-35/8 (OR) MD ACCN ) UPTO MAP SPECIFICATION AND CONSTRUCTION OF TWO TOILETS ADJACENT TO BLDG NO P-178 (TRG ROOM AND FWC) AND PROVN OF STORAGE SPACE (01 X ROOM) UNDER GE (ARMY) DHAR ROAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom raid on either side and as gap insert for top rail on either side andas gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rials with suitable PVC sheet beading, and joined together with solvent cewment, suppling and fixing in the frame at site as per specification and drawing as directed by Engineer-inCharge.

Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

Pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

for pressed steel frames of size 75 X 60 mm for Cubboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

35 mm thick 2nd class factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat all as specified and directed

35mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, complete all as specified.

Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc complete all as specified.

Dismantling boarding, any description, fixed in any position with nails all as specified and as directed.

18 mm thick water proof solid Medium Density Fibre (MDF) board prelaminated both side(Approved colour) for Door/ Cupboard shutters/ shelves and partition of required size fabricated by jointing and fitted with necessary arrangement as in cupboard shutter/ backside/partition/shelves etc fixed with each other using solvent cement adhesive and stainless steel screws. the visible edge of board/ shutter shall be lipped with 18mm wide and 1mm thick edges leaping tapes as per manufacturer instructions, complete all as specified and directed.

25 mm extruded Brass handle fabricated type polished complete all as specified and as directed.

Continuous (piano) hinges 30mm width of flap, mild steel bright finish or electrogalvanised of complete all as specified.

Magnetic catcher suitable for kitchen cabinet shutter complete all as specified and directed

Aluminium anodised 100 mm long Butt hinges type B-21 with galvanised mild steel screws complete.

Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

125 mm long Aluminium anodised barrel tower bolts, etc.complete all as specified.

200 mm long aluminium , anodised barrel tower bolt of extruded section and fixed. complete all as specified and directed.

Aluminium anodised handles, cast type anodised 100 mm long complete all as specified and directed.

125 mm long cast type Aluminium anodised handles etc.complete all as specified.

Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

300 mm long aluminuim alloy, anodised , sliding bolt with hasp staole (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Door eye viewer, viewing angle 180 degree, mounting diameter 14mm, total size 4 x 2.5cm (LxD) with good quality glass eye lens, , brass chromium plated fixed in position for door shutters, complete all as specified & directed.

Door seal brush Ialuminium plate with nylon brush) of required length for any size of door, fixed with stainless steel screw, complete all as specified and as directed. Make Harrision or equivalent

100mm long door stopper of aluminium alloy body and tongue,anodised fixed to door complete all as specified.

300mm size ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, fixed to chowkhats/welded to chowkhats as directed, complete all as specified.

100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed.

Powder coated Aluminium windows/vents complete all as specified in particular specification and as shown on drawings for various sizes and pattern with following powder coated aluminium sections :- Notes:- A. The rates quoted for powder coated aluminium sections shall be deemed to include the following:- (i) The aluminium section and fittings shall be Pure polyster powder coated of thickness not less than 50 microns. (ii) Rubber gasket for fixing glass to windows/vent shutters. (iii) Fixing of window in openings with and including min 75x10 GI screws all around @ 300C/C (Min 2 Nos on one side) with PVC RAWL PLUGS/Sleeves. (iv) Rollers, concealed lock cum handle & other fittings for sliding shutters shall be provided as per manufactures instructions and approved by GE. (v) Silicone sealant shall be applied on internal as well as external periphery of window and masonry joint to avoid water seepage. (vi) All other sundries all as per manufacturer instructions and as directed. B. The rates quoted for powder coated sections shall exclude the cost following and shall be paid seerately under respective items of Sch`A'/BOQ:- (i) Glass and wire mesh (ii) 40x40x3 aluminum angle provided on all corners of the windows. (c) Aluminum-U-channel shall be provided for fixing of wire mesh. (d) Powder coated aluminium handles and hinges for fixing of openable shutters C. OTHER (i) No allowance for wastage/overlaps shall be considered for payment. (ii) Range of dimension of opening size has been mentioned. The same shall be fixed as per measurements of opening of windows as per site requirement by the GE/EIC during execution of work. (iii) Powder coated aluminium section shall be provided all as shown on drawings and as directed.

(a) THREE TRACK powder coated aluminium section as in window/vents frame for sliding shutters.

(b) Powder coated aluminium sections as in window/vents frame for openable shutters.

(c) Powder coated aluminium sections as in sliding window shutters.

(d) Powder coated aluminium sections as in openable window shutters.

(e) Powder coated aluminium tower bolts 75mm long and fixed.

(f) Powder coated aluminium butt hinges 75mm and fixed.

(g) Powder coated aluminium handle 75mm and fixed.

(h) Powder coated aluminium plate type II Gate and shutter, hook and eyes 100mm and fixed.

Sheet glass 4 mm thick ordinary quality for fixing to aluminium windows with all necessary fixing arrangement, complete all as specified.

Stainless steel pipe of 20mm dia, heavy grade with and including fixing brackets, stops, rollers etc., in cupboards, complete all specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed.

Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors over 10 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified.

For non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. In vertical portion including rendering 10 mm thick in CM 1:4 etc complete all as specified.

Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade incl screeding 10mm thick in CM 1:3 etc complete all as specified.

For Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. over and incl 20 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes etc complete all as specified..

For kota stone, 18-20 mm thick as in vertical surfaces such as skirting/dado/riser of steps etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick plastering in cement mortar 1:3, incl polishing, complete all as specified. Notes:- 1. Single piece kota stone shall be provided in riser of stairs as per site requirement.

For 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over 15mm thick screed bed etc. all as specified

Demolition of cement concrete in any position n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

For 50 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

For providing cement concrete Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as nominal mix in lintels upto 1.5m clear span, cills, steps, parapets, copings, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating, as directed including use of form work etc

For providing precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvres and jallies 35mm thick (measured solid) including all moulding set in cement mortar 1:4 complete all as specified. .

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

In repaur for RCC nominal mix type B 1 (1:2:4) (20 mm graded aggregate) in chajja.

in repair for RCC nominal mix type B 1 (1:2:4) (20 mm graded aggregate) in beams, cantilever, bressummers,lintels etc.

For precast RCC type B1 (1:2:4) (20graded agg) set in cement mortar 1:4 as in landings, cover slab, chulha hood, chajja, sheleve and similar articles with plain faces complete all as specified

Use and waste of form work to edge of concrete flat treads breaks in floor window cill concrete railling opening of concrete walll, floor, roof n.exc 20 cm wide and side of RCC bands in wall horizontal/sloping and similar works exc 10 cm but n.exc 20 cm wide for roughed finished surfaces of concrete.

Formwork to chullah hoods, chajjas, troughs and similar items including edges

Form work to the sides and soffits of floor or roof beam, beam, lintels,shelves incl supporters all as spcified and directed.

for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified

,-ditto as per item 60 above but 6 to 8 mm dia

Taking down existing roof treatment of any description and any type and position incl padding removing the debries from site outside MD land all as specified and directed by Engr-in-Charge

15mm thick plastering in cement mortar 1:4 (mixed with WPC as per manufacturer instruction) on roof surfaces after applying cement slurry @ 3kg/Sqm, surface finished even and smooth without using extra cement, complete all as specified. Note: WPC shall be measured and paid for seperately under respective item

Supply only liquid water proofing compound

Providing and laying 40mm thick PCC (1:2:4) using 20mm graded agg with WPC Compound complete all as specified and directed by Engineer-in-Charge.(WPC will be paid seperately)

Roof treatment for Non Accessible Roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm, Top surface of roof after carrying out treatment as specified here in above as per manufactur instructions, complete all as specified

Roof tretment for accessible roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm,complte all as specified

Taking down old PCC tiles from roof and removing bedding at any position incl taking out existing roof treatment and removal of debries from site all as specified and directed

Cement concret coloured tiles with cement and no pigment 30cmX30cm x20mm thick machine pressed set jointed and including 15mm screed bedding in CM 1:4 as pointed in neat cement slurry in flooring as cut and poslished all as specified.

Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified. Note : WPC shall be measured and paid saparetly.

chicken wire mesh of size 12.5mm and wire dia 0.51mm (24SWG) hexagonal construction, stretched firmly for roof treatment complete all as specified and as directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified

Brick work sub class B brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius in CM 1:6 including wall for crumple joint complete all as specified and directed by Engr -in-Charge.

RCC nominal mix type B1 (1:2:4) (20 mm graded aggregate) as in slab

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) Demolition of floor & lime/concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) and cleaning by wire brush to remove all dirt and cleaning the surface with water. (b) Proving 60cm long, 40mm dia GI medium grade spout pipe by making holes and making the surface good. (c) Brushing neat cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (d) Rendering 15 mm thick in cement mortar (1:3) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (e) Applying a coat of bituminous primer confirming to IS [email protected] lit/sqm. After drying of primer apply a coat of hot blown 85/25 grade bitumen @1.2kg/sqm. (f) Applying self adhesive type APP(Atactic Poly-propylene polymer) modified membrayester non-woven mat (PF) reinforecement. (g) PCC 1:7 :12 for filling of sunken portion after conceling all menbrane and sealing all joints with sealing compound of MC Bouchemie/Roofex/Forre/Choksy/Dr Beck&Coty/FOSROC.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc

Rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound @ 3% weight of cement (WPC Shall be measured & paid separately.

Rendering 10 mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

5 mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

Complete removal of existing treatment on external/internal wall by scraping, sand papering or by using mechanical sander all as specified and as directed by Engr-in-Charge.

Complete removal of existing treatment on ceiling by scraping, sand papering or by using mechanical sander all as specified and as directed by Engr-in-Charge.

Two coat of exterior emulsion paint (Weather Coat) over one coat of acylic primer on any type of wall, roof boarder, drops, fins, chajja / roof facia, column etc, including preparation of old/new surfaces complete all as specified.

Preparing new plastered & complete removals wall surfaces Applying two coats of OBD of approved tint on new plastered surface over a coat of 2 mm thick wll care putty complete all as apecified and directed.

Preparing new plaster surfaces of wall and applying three coat of white wash complete all as specified.

Preparing old decorated wall surfaces applying two coats of white wash on wall complete all as specified.

Applying three coat of white wash on newly plastered surface of ceiling etc complete all as specified.

Applying two coat of white wash on old plastered/unplaster surface of ceiling etc complete all as specified.

Two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description, over 10 cms in width or girth not otherwise described

Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description, over 10 cms in width or girth not otherwise described

S & F in Repair stainless steel plate racks of size 750mm x 900 x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified.

S & F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe incl sink coupling, 40mm waste fitting, overall size915mmx460mm with bowl size 410 mm x 330mm x 160mm, etc complete all as specified and as directed.

S & F in repair Sink mixer with regular spout wall mounted with connecting legs and wall flanges and including all necessar fitting, complete all as specified. Make: ESS ESS Cat Part No. EC-12 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair 15 mm dia bore fancy type chromium plated bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed Make. ESS/Jaquar or equivalent.

S & F in Repair Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified.Make: ESS ESS Cat Part No. AC 703 or equivalent in Make as per Appx `E' to Particular specification.

PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S & F in Repair Wall mixer with provision for overhead showes with 115mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed.Make: ESS ESS Cat Part No. EC-10 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.Make: ESS ESS Cat Part No.AC 701 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified. Make: ESS ESS Cat Part No. AC702 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair Corner glass shelf 200mm (brass brackets), fixed with brass screws and plugs, complete all as specified Make: ESS ESS Cat Part No. AC 207A or equivalent in Make as per Appx `E' to Particular specification.

S & F inRepair Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, fixed in repairs, complete all as specified.Make: ESS ESS Cat Part No. RF 202 for Shower and Cat Part No. SA-105 for shower arm or equivalent in Make as per Appx `E' to Particular specification.

S & F inRepair Angle valve with wall flange, 15mm bore, fancy type, chromium plated with long shank and cup, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified. Make: ESS ESS Cat Part No. T-112B or equivalent in Make as per Appx `E' to Particular specification.

S & F inRepair PVC connections 15mm size with Brass nuts of length 600mm, fixed in repairs, complete all as specified. Make: Prayag Cat Part No. BCT-04 or equivalent in Make as per Appx `E' to Particular specification.

Vitreous China, wash hand basin, flat back white of size 450mmx350mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified.Make: Cera Cat Part No. S 2040102 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair CP brass Centre hole basin mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified.Make: ESS ESS Cat Part No. T-118 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Reapir Mirror cabinet PTMT of 400mmx500mm with magnetic locking arrangement fixed with and including wooden plugs with chromium plated brass screws, complete all as specified. Make: Prayag Cat Part No. 554 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repairs Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified.Make: Cera Cat Part No. Calina S 3010102 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair PVC valveless, with top button double action type,syphonic action type flushing cistern, 10 litres capacity, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe, fixed in repairs, complete all as specified.Make: Prayag Cat Part No. 504 or equivalent in Make as per Appx `E' to Particular specification.

S & F in Repair Peg set of six, stainless steel of suitable length, complete all as specified. Make: Prayag Cat Part No. BEA 30 or equivalent in Make as per Appx `E' to Particular specification.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store.

GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

Ditto- but refixing 15 mm dia ,old steel tubuing and connections in new or old possition (wall,ceiling and floors etc)

25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store.

GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

Ditto- but refixing 20 mm dia ,old steel tubuing and connections in new or old possition (wall,ceiling and floors etc)

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks staging/cage and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

Expanded metal exc 4 Kg cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia all fixing with galvanised steel stapple fixed to steel or wood members laid in any position incl closing after filling.

Dismantling water tank and remove to Store of capacity exc 500 but not exc 1000

500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

Repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

GI Tank nipple 20mmsuitable for HDPE water tank min wt for 15mm-38gm/20mm-45gm

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories)

PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips MS FI, complete all as specified.

Dismantling of cast iron or PVC pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, laid in trenches or in floor complete all as specified.

All as per item No 130 here-in-before but 110mm bore

PVC(SWR) bends suitable for 110 mm external dia complete all as specified

PVC(SWR) bends suitable for 75 mm external dia complete all as specified

PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

PVC (SWR) junction single, (Double T) equal or unequal of 110mm dia

PVC (SWR) junction single, (Double T) equal or unequal of 75mm dia

PVC (SWR) vent cowl of 110mm bore

Welding in repair n.exc 2.5 cm in length to metal of any thickness to be welded all as specified and as directed.

Providind RCC nominal mix 1:2:4 incl necessary formwork and providing plaster of 1:3 and two coats of finishes over a coat of primer for RCC projected portion as in drawts, facia, fins etc incl demolition of existing and providing TMT bars if reqd all as specified and directed. ( Note Length of drawts,fins,facia shallbe measured inrespect of any thickness and heigth)

Post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

Post construction ATT Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

M & L in repair of RCC slab,coloumn,beam by removing of old portion of concrete and cleaning/brushing and removing of loose concrete/ applying required cement slurry @ 3.5 Kg/Sqm making good with concrete 1:1.5:3 and applying 3 mm thick cement mortar 1:4 and finish the surface all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Hard/dense soil complete all as specified and directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified.

100mm thick PCC 1:4:8 type D2 (40mm graded aggregate) for floor sub base.

Machine pressed precast concrete interlocking paver block, shape and size as approved by the GE, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified and as directed.

Pre cast cement concrete block masonry type C1, 1:3:6 (20mm graded aggregate) with solid blocks of size 8cm thick 25cm wide and 30cm depth/ht and setting with cm 1:6 complet as in kerb stones, or mud stops rounded or chamfered on edges complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft/loose soil

Reinforced cement concrete M-25 using 20mm graded aggregates in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

All as per item No 150 above but in columns

All as per item No 150 above but in beams, cantilevers, bressummers, lintels over 1.5m span

Reinforced cement concrete M-25 using 20mm graded aggregatesas in slab supported on walls, beam and columns in floors, roofs , landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Form work to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Form work to sides of rough finished square, rectaungular or polygonal surfaces of of pillars, posts, struts, piers, columns and stanchions.

Formwork to sides and soffit of rough finished flat surfaces of soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

All as per item No 60 above but 5mm dia and over upto and including 10mm dia in stirrups etc

Brick work with subclass 'B' bricks, straight or curved on plan to any radious in half brick thick walls in CM 1:4 complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

Preparation of new plastered surfaces of wall and applying three coats of white wash on wall ceilings complete all as specified.

75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring and all as specified and directed.

Non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors etc complete all as specified and directed.

Box type Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

3mm thick figured glass, pin headed type and glazing with oil putty in Square n. exc 0.5 sqm in each pane complete all as specified and directed.

MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush down pipe) incl connection to drain and flushing pipe complete all as spd and directed.

Repair pillar tap, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

Vitreous China urinals, bowl type (back or corner wall type) size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

Precast cement concrete 1:2:4 type B1 using (20mm grade stone cum aggregate) as in slab for manhole cover complete all as specified and directed.

Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate) as in fdn filling and mass concrete complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, benching, even and smoth without using extra cement etc complete and directed

Rendering 15 mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

Demolition and breaking up 150 mm internal dia of drain pipes (SGSW) set in cement mortar and laid in trenches incl all specified & directed

Reinforced concrete pipes, class NP2, laid & jointed complete with collars, bore of pipe 150 mm compete all as specified & directed.

Concrete bed to 150 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid in cement concret M-10 (Normal mix) type C-2 using 40 mm graded stone aggregate and tested complete all as specified & directed.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for as specified dia of pipe 150 mm

Framed work as in man hole cover, angle or other section etc, complete welded for fixing of mild steel bar, sheeting or othercovering etc, also fastening and fixing conforming to Fe 410 W Gide E-250 complete all as specified and as directed.

Forwork to rough flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 20mm thick (Horizontal or sloping)

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering Door etc to be prepared for hanging or sliding with and including either hooks and hinges door fitting (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastering and fixing complete.

Steel windows made up of box steel section of gauge ms sheet up outer frame shutter farame and centre frame with outer side glazed shutter an inner side wire gauged shutter fixed as shown in drg consisting with two nos pintol hinges 75mm long two Nos stove enemated tower bolts 150 mm long and one No steel handle, deovitailed or welded panels complete with necessary cleats and stopers all as specified as directed.

110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

150mm bore salt glazed stonware drain pipe grade 'A' conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 all as specified and directed.

Cement concrete aggregate bed to drain pipe 150 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed.

PCC 1:2:4 type B1 using 20mm graded aggregates as in surfaces channels and drains complete all as specified.

Sokage wells including excavation in ordinary soil foundation in PCC 1:3:6 walls of honey combined and soild in CM including intercepting scren well chamber brick work in CM RCC cover slab in M-25 filling with brick bats of size 1.8 mtr dia and 3.00 Mt effecttive depth complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring complete (for simple and modular type ) with 1.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed for the following :-. Note :- cover plate with frame and sunken box for modular only will measured and paid separately.

One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.

One switch socket outlet point 3 pin 5 Amps on Independent board.

One light point controlled by two 2-way switches, with cables 1.5 sq. mm size

One switch socket outlet point 3 pin 5 Amps on same board.

Material and labour for Point wiring complete (for simple and modular type ) with 2.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit Medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed. Note :- cover plate with frame and box will measured and paid separately.

Material and labour as in repair for sub main wiring with two single core PVC insulated unsheathed copper conductor cable 6 sqmm FRLS drawing in and including rigid non metalic PVC heavy duty 25 mm dia conduit concealed on wall/surface on ceiling with one additional PVC wire of copper conductor of 6 sqmm FRLS for earth continuity conductor incl taking down old Unsv submain any type and size and making good the disturbed surface complete all as specified and directed by EIC.

S&F as in repair Angle lamp holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.

S&F as in repair Bulk Head fittings 10 Watt on wall all as approved and directed by Engineer-in-charge.

Supply and fixing LED 9 Watt lamp , 240 Volt, 50 Hz lamp complete

Supply and Fixing LED 20 Watt tube light fitting Batten integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories incl taking down complete all as specified and directed by Engr-in-Charge.

Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection incl taking down complete all as directed by EIC

S&F 1.5m long 40mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of aluminium paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. Clamps as required to fix on concrete / steel poles incl taking old unsve GI bracket any type and size complete all as specified and as directed

Taking down carefully existing ceiling fan any type and size , removing its fan blade and deposited in MES store for safe custody all as directed by Engr-in-Charge

Taking down carefully existing Exhaust fan any type and size and deposited in MES store for safe custody all as directed by Engr-in-Charge

Taking down carefully existing Electric Water Heater (Geyser) any type and size and deposited in MES store for safe custody all as directed by Engr-in-Charge

Taking down carefully old Energy meter any type and any capacity and deposited to MES E/M store yard compete all as directed by Engr-in-Charge.

Refixing of existing serviceable ceiling fan any size from MES Store Yard along with new connection wire 3 core duly refixing the blade along with new MS clamp properly all as directed

Refixing of existing serviceable Exhaust fan any size from MES store yard including fixing with fastnuts and provisioning of three core flexible copper cord of required length from ceiling rose or connectror to Exhaust fan for connection, complete all as directed by Engr-in-charge.

Refixing of existing serviceable electric Water Heater (Geyser) any size (Geyser to be collected from MES Store yard) including fixing with fastnuts complete all as directed by Engr-in-charge.

Refixing of Energy Meter any type and size (meter to be collected from MES store yard) and making connection, complete all as spd and directed by Engr-in-Charge.

Material and labour for making hole in the existing brick wall without damaging the structure suitable for accommodating 300 mm Ex fan and make good the disturbed suface by cement/mortar complete all as spd and directed by Engr-in-Charge.

Supply and fixing of new Exhaust fan AC single phase 230 volts for size 300 mm sweep, including making hole and fixing arrangement including nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete.

Supply and fixing Ceiling fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement such as nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete all as specified & directed.

S/F Call Bell AC 230 V Single Pole along with necessary electric connection all as spd and directed.

S & F ceiling rose Ceiling rose, PVC/polycarbonate, isolated body all as specified and directed.

Supply and fix Modular switch 1 way 6A,1 module

Supply and fix Modular switch 1 way 16A,1 module

Supply and fix Modular switch 2 way 6A, 1 module

Supply and fix Modular Bell push 6A 1 module

Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module

Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module,

Supply and fix Modular Fan step regulator, 120W - 2 module

supply and fix white cover plate with frame, 1 module

supply and fix white cover plate with frame, 2 module

supply and fix white cover plate with frame, 3 module

supply and fix white cover plate with frame, 4 module

supply and fix white cover plate with frame, 6 module

Supply and fix modular Metal flush box 1/2 module

Supply and fix modular Metal flush box 3 module

Supply and fix modular Metal flush box 4 module

Supply and fix modular Metal flush box 6 module

Supply and fixing as in repair Metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps complete all as specified and directed by EIC.

Supply & Fixing TPN DB 4 Way distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar complete confirming to IS 13032 & 8623 incl taking down old UNSV TPN DB any type and size complete all as specified and directed.

Supply & Fixing SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, confirming to latest IS incl taking down old UNSV SPN DB any type and size complete all as specified and directed.

Supply & Fixing MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.

Supply & Fixing MCB TPN 63 Amps 440 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.

M&L as in repair for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe light grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Material and labour for earth Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw

Supply and fix LED Mirror wall light fittings 10/9 Watt, 240 Volt, 50 Hz complete all as specified and directed.

M&L for dismentling the U/S valve chamber including rusted MS cover complete with out disturming the existing pipe line and Costruction of new valve chamber incl necessary earth work in any type of soil, PCC foundation C-2 (1:3:6) type C2 40mm graded stone aggregate as in base concrete ,brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4 , 6 mm thick MS cover with hinges and locking arregement fixed to angle iron frame made out of 40x40x6 mm MS angles complete with 2 coats of synthetic enemal paint over one coat of red oxide primer on all metal works & three coats of white wash on all plastered surfaces of valve chambers size 900mm x 900mm x 600mm complete all as specified & directed by Engr -in- charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core

Dismentaling of cable XLPE Insulated cable of size 10 Sqmm 4 Core complete as spd by EIC.

Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation of poles,cable laying etc, including forming bottom surface to required level and getting out in any type soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soil/loose soil including spreading, leveling,watering & well ramming in layers not .exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing of surplus spoil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches and punning down complete all as specified and directed by Engineer-in-Charge.

Material and labour cover to underground cable with one layer of bricks using sub class 'B' bricks laid flat acorss the cable complete all as specified and directed by Engineer-in-Charge.

Supplying ,Laying and testing complete GI tube medium grade 50 mm bore with all fittings laid in trenches complete all as specified and directed.

Supplying ,Laying and testing complete GI tube medium grade 20 mm bore with all fittings laid in trenches complete all as specified and directed.

Supply and Fixing of Gate valve 50 mm bore complete all as specified.

Supply and Fixing of Gate valve 20 mm bore complete all as specified.

Cutting/making hole into CI/DI/MS pipes of 100 mm carefully and insertion of new tee incl clamping with suitable size clamp for taking small branch connection upto 50 mm bore complete all as directed by EIC.

Taking down old unserviceable GI pipe 50 mm dia

Taking down old unserviceable GI pipe 20 mm dia

Taking down old unserviceable valve 50/20 mm dia

Supply and fixing socket outlet 5 Amp 230 volt ISI Mark complete all as specified and directed

Supply and fixing Switch , single pole, one way 5 Amp 230 Volt ISI Mark complete all as specified and directed

Supply and fixing socket outlet 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply and fixing switch , single pole, one way 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply & fixing SPN distribution Box double door of protection grade IP 43 in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar din rail, earth bar of 8 way confirming to IS 13032 & 8623 complete all as specified and directed.

S & F stepped type electroic fan regulator 120 watt flush type 2 module all as specified & directed

M/S PAWAN KUMAR ANAND

S.K CONSTRUCTION

JINDAL BUILDERS

SHIVAE CONSTRUCTION