Const of 1 No RCC HLT Repair of Existing 3 No S S Tank 3 No FB 2 No CWT B Wall Inlet channel Houdies Lighting Arrangment Laying of Head Works and distribution pipe line including FHTC in village Dulat

Amount

Provision for Misc Repair of RCC Pipe Joint includding all type material like cement motrar, sspen yearn, excavation and refilling the same after completion of work.

Supply erection, testing of reputed make LED vapour light 100 watts with fittings and accessories complete in respects.

Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6mm Sq mm complete in all respects with accessories like thimble etc.

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum Four (4) Star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw water pump set 2 No. 1600 Lpm , 12 mtr head7.50 BHP Water Works A) Raw Water Pump 1600 LPM, 12.00 Mtrs. Head 7.50 BHP

Supply, erection, testing and commissioning of Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and 400mm deep having following items : a) For Clear water pump sets for 1600 Lpm x 40 M head = 2 No. AT WIW a) Main switch 63 Amp 2 No. ((L&T, Siemens, ABB) b) Volt meler 100 x 100mm range 0 to 500 volt 2 No:(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 100 Amp 2 Nos(AE/KAPPA/L&T). d) CT 100/3 2 No (AE/KAPPA/L&T) e) Vss & ASS 2 No. cach of approved make f) SPP2 No. of approved make starier, star dela, I No. for 1600 LPM x40 M Head Motor (L&T Siemens, AAB) h) Capacetor of suitable i) Indicating Lamp-One set capacity = 2 No ) j) Change over switch 63 Amp = 2 No )

Supply, erection, testing and commissioning of Wall mounted electrical panel board, fabricated from 16 S WG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm having following items: a) For Raw water pump sets for1600 Lpm x 12 M head 2 No. a) Main switch 63 Amp 2 No.(L&T, Siemens, ABB) b) Volt meter 100 x 100mm.range 0 to 500 volt 1 No.(AE/KAPPAVL&T) c) Amp meter 100x100mm range 0 to 100 Amp 2 Nos(AE/KAPPA/L&T) CT 100/3 2 Nos (AE/KAPPA/L&T) e) VSS I No. & ASS 2 No. of approved make ) SPP 2 No. of approved make g) Motor starter, star delta, 2 No, for 1600 LPM x 12 M Head Motor (L&T Siemens, AAB) h) Capacetor of suitable capacity 2 No i) Indicating Lamp-One set j) Change over switch 63 Amp = 1 No at B/S 2 (For B/STN)

Single layer brick lining of 6.83 cm thick brick layer laid ing 1:3 mortar over 6mm thick 1:3 cement plaster

Less Cerdit of old pumping machinery at W/W Raw Water = 2 NO.

Less Cerdit of old pumping machinery at W/W Clear Water =1 NO.

Less credit of old Brick and Brick batss Credit of old Brick

Less credit of old Brick and Brick batss Credit of old Brick bats

Bidder Name

Amount

VINOD KUMAR KHANNA(GSTN-NA)

Umesh Kumar Contractor(GSTN-NA)

Umesh Kumar Contractor

VINOD KUMAR KHANNA