Loading…
Loading…
Tender Value
₹15.7 L
EMD Value
₹31,306
Closing Date
7 Oct 2026, 4:00 pm
Executive Engineer
SSM Engineering Cell, Education Department, Lowiss Jublee Complex, Darjeeling. GTA
Construction of innovative lab at St. Alphonsus High Secondary School, Kurseong Block, Dist. Darjeeling, under RIDF XXX.
2026_GTA_5075275_1
4/EE/SSMEC/ED/GTA/2026-27
Open Tender
CIVIL WORKS
Percentage
Darjeeling
EMD, Bid Capacity, Declaration Form X Y, Pre Qualification and NIeT
3 documents required · 3 mandatory
₹1,000
₹31,306
25 Sept 2026
25 Sept 2026
9 Oct 2026
25 Sept 2026
7 Oct 2026
25 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and Applying plaster or pairs putty 2mm thickness over plastered surface to prepare the surface even and smooth complete. | 135.75 | SQM | 262.7 | ₹35,661.53 |
| 2 | Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal- sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost)10.10.1 Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal size) kg | 261 | KG | 131.05 | ₹34,204.05 |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 3473.85 | 5.04 | Sq.M. | 3,473.85 | ₹17,508.2 |
| 4 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg
per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
9.9.1 Second class teak wood 35
mm thick sqm 4940.20 | 0.11 | Sq.M | 4,940.2 | ₹543.42 |
| 5 | Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied @ 2.20kg/10 sqm sqm Brick Partition walls | 262.68 | Sq.M. | 223.6 | ₹58,735.25 |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC
content less than 50 gram/litre, of approved manufacturer and of required
shade and colour all complete to achieve even shade and colour :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer having VOC content
less than 50 gram/litre sqm 185.65
Brick Partition walls | 203.31 | Sq.M. | 185.65 | ₹37,744.5 |
| 7 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture sqm 170.70 | 27.3 | Sq.M. | 170.7 | ₹4,660.11 |
| 8 | Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) 125x65x2.12 mm each 55.75 | 4 | each | 55.75 | ₹223 |
| 9 | Providing and fixing bright finished brass door latch with necessary screws etc. complete :
300x16x5 mm each 322.20 | 2 | each | 216.55 | ₹433.1 |
| 10 | 9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
250x10 mm each 441.60 | 4 | each | 441.6 | ₹1,766.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.08 MB
BOQ_5164651.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .