REPAIR TO MES INSTALLATION BUILDINGS NOS T-73, T-74, T-85, T-86, T-56, T-67 AND CERTAIN OTHER BUILDINGS AT MIRAN SAHIB UNDER GE JAMMU

Amount

B/R Portion: - Demolition of brickwork / stone masonry built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles complete all as specified and as directed.

Dismantling unframed work timber scantling 40 Sqcm and over in section in any position as in unframed work complete all as specified and as directed.

Dismantling timber scantling in fillets, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and as directed.

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete and fixed all as specified and as directed.

Material and labour for brick work with sub class 'B' old size brick straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete and fixed all as specified and as directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer's instructions of brick work or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Material and labour for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coats of cement based paint over and including one coat of primer complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1 mm wall care putty over a coat of primer complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying two coats of cement based paint complete all as specified and as directed.

Material and labour for complete removing of existing treatment on old surfaces of wall including cornices (plastered or unplastered) and applying 1 mm wall putty and applying two coats of oil bound distemper any color over wall putty over one coat of primer complete all as specified and as directed.

Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per Square metre, top layer 15mm cement plaster 1 : ½ : 2 (1 cement : ½ coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings including taking down old plaster complete all as specified and as directed.

Suppy and fixing structural steel work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or mild steel tube pipe) including distance pieces, cleats etc Fe-410W (Grade 'E'-250) quality 'A' including shop coat of primer complete all as specified and as directed.

Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS : 1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate etc Fe-410W (grade 'E'-250) complete all as specified and as directed.

Dismantling AC corrugated, semi corrugated sheets in roof covering including ridge complete all as specified and as directed.

Supply and fixing prepainted galvalume aluminium zinc coating galvalume iron based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.

Supply and fixing prepainted galvalume aluminium zinc coating galvalume iron based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supply and fixing for TMT mild steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fixing for TMT mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished complete all as specified and as directed.

Material and labour for formwork to flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams rough finished complete all as specified and as directed.

Material and labour for formwork for flat surfaces to chullah hoods, chajjas, troughs and similar items including edge fair finished complete all as specified and as directed.

Material and labour for reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggreage) as in beams, cantilevers, bressumers, lintels complete all as specified and as directed.

Material and labour for reinforced cement conrete (1:2:4) type B-1 (using 20mm graded crushed stone aggreage) as in chajja, supported on wall complete all as specified and as directed.

Material and labour in replacement for decorative false ceiling boarding with Gyproc plain board 12mm thick including galvanised iron framework for seamless ceiling comprising of Gypsteel Ultra Ceiling section 80 x 26 x 30 x 0.5mm, perimeter channel 20 x 28 x 30 x 0.5mm, intermediate channel 15 x 45 x 15 x 0.9mm, ceiling angle 25 x 10 x 0.5mm, connecting clip, soffit cleat necessary rawl plug screws, jointing with Gyproc paper tape, finished with one coat of Gyproc Profill complete all as specified and as directed.

Material and labour for providing and fixing in position suspended false ceiling system using 'E' grid suspended ceiling grid system. The size of grid shall be 600 X 600mm with galvanised iron frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick high pressure stream cured non primered classic / designer variant E-Board ISI marked IS No : 14862-2000. Fibre cement 'E' board to be placed in the grid of 'E' grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips including dismantling wall and ceiling boards (fibre pulp / insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixing the same in position after replacing the ceiling complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails / screws complete all as specified and as directed.

Supply and fixing 5mm thick prelam PVC sheet in strips and channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement complete all as specified and as directed.

Supply and fixing 5m thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawings complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) not exceeding 1.50 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.0 Sqm each and removing from site complete all as specified and as directed.

Supply and fixing factory made UPVC white colour three track three panels sliding window with fly proof stainless steel wire mesh (Two no's glazed and one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm and sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 Sqm) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: - (i) Glass or wire mesh shall be paid separately. (ii) For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Material and labour for 12mm thick frosted toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

Supply and fixing 900mm long 32mm dia stainless steel AISI 316 door handles fixed to toughened glass door complete all as specified and as directed.

Supply and fixing in repairs powder coated aluminium three track sliding type glazed window, shutter with 5mm thick plain sheet glass fixed open track section 100 x 38mm x 1.2mm having three track (two of glass and one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperature 2mm) with members of window shutters of section 38 x 12mm including wire gauge and grill shall be fixed with the help of 40 mm aluminium flat and other standard bombay sliding section including all necessary fibre wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading etc complete all as specified and as directed.

Supply and fixing matt finish stainless steel 304 S grade square bar, round/square bars, stainless steel flat etc as in framed work such as grills, guard bars, gratings etc including bending, cutting and welding as neccssary complete all as specified and as directed.

Supply and fixing in repairs powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed.

Supply and fixing in repairs powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg / m including necessary jointing cleats, glazing clips, rubber neoprene packing handles 2 No's in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fixing double action floor door spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, heavy duty with capacity upto 100 Kg fixed to door complete all as specified and directed. Make: - Kich Cat No - FS112S or equivalent in Godrej.

Supply and fixing 5.5mm thick frosted / tinted glass ordinary quality and glazing with oil putty / beads in squares exceeding 0.5 Sqm each pane complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

Material and labour for 10 mm thick rendering for backing of tiles in cement mortar (1:4) complete all as specified and as directed.

Material and labour for vitrified ceramic double charged tiles 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors with spacers etc. set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge complete all as specified and as directed.

Material and labour for vitrified tiles any colour 10 mm thick (square / rectangular) polished as in floor, area of each tile not exceeding 0.36 Sqm etc set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge complete all as specified and as directed.

Description all as per Ser item No 50.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in cement mortar (1:4) complete all as specified and as directed.

Material and labour for filling in tiling grooves 4-5mm wide and 10mm deep with epoxy with glitter at top as per manufacturer's instructions and clean the tile surface with soft sponge complete all as specified and as directed.

Material and labour for 16 to 18mm granite (Jet black, Nero Absolute or as appoved by Engineer-in-Charge) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including taking down old one complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 18-20 mm thick over and including 20 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC complete all as specified and as directed.

Supply and fixing in repair vitreous china water closet pedestal pattern cascade type with inbuilt flushing cistern and seat cover with complete fitting complete all as specified and as directed. Makes: - JAQUAR (LYRIC) CAT PART No. LYS-WHT-38851S (S-300) / HINDWARE (SPLENDOR) STARWHITE CAT PART No. 92519 S-30 / PARRYWARE (OMEGA) C-8906 (S-300).

Supply and fixing in repair vitreous china under counter type wash basin oval size 555 x 425 x 195mm including all fittings complete all as specified and as directed. Makes: - JAQUAR (FLORENTINE) CAT PART No. FLS-WHT-5701 / HINDWARE (ZEN) CAT Part No. 10049 / PARRYWARE (CASCADE NXT) CAT PART No. C0407.

Supply and fixing in repair vitreous china urnials half stall with urinal spreader including connecting pipe, flushing valve and flush / waste pipe with complete fittings complete all as specified and as directed. Makes: - JAQUAR CAT PART No. URS-WHT 13261 / HINDWARE (Opus Urinal) CAT PART No. 96014 / PARRYWARE(CRAFT) CAT PART No. WPC05891C.

Supply and fixing curved shaped 8mm thick frosted glass urinal partition of size 900 x 450mm including necessary stainless steel clamp and bottom support to fixed on wall and floor complete all as specified and as directed. Make: - Jaquar JSE-CHR-810uc 450X or equivalent in Hindware / Parryware.

Supply and fixing in repair for 15mm bore chromium plated central hole single lever basin mixer for wash hand basin mixer without popup waste system with 450mm long braided hoses complete all as specified and as directed. Makes: - JAQUAR (KUBIX PRIME) CAT PART No. KUP-35011 BPM / HINDWARE (CERA) CAT PART No. F440009 / PLUMBER (ZEUS) CAT PART No. ZE-3104.

Supply and fixing in repair chromium plated brass stop / angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and as directed. Makes: - JAQUAR (KUBIX PRIME) CAT PART No. KUP-35053PM / HINDWARE (CERA) CAT PART No. F440005 / PARRYWARE (ZEN X) CAT PART No. G4107A1.

Supply and fixing in repair fancy type brass chromium plated towel ring round with round flange including necessary fittings complete all as specified and as directed. Makes: - JAQUAR CAT PART No. AQN-7721 / HINDWARE CAT PART No. F880007 / PARRYWARE CAT PART No. T6002A1.

Supply and fixing in repair chromium plated brass bib taps with wall flange 15mm fancy type chromium plated cast copper alloy with quarter turn handle and wall flange complete all as specified and as directed. Makes: - JAQUAR (KUBIX PRIME) CAT PART No. KUP-35037PM / HINDWARE (CERA) CAT PART No. F440003 / PARRYWARE (ZEN X) CAT PART No. G4104A1.

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer-in-Charge.

Providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Material and labour for exterior grade full body vitrified tiles matt finished 400 x 400 x 12mm thick set jointed in neat cement slurry and pointed with grey cement and pigments to match the shade of tile pattern as approved in floors including 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Supply and fixing box type steel windows / ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 and all as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples.

Supply and fixing galvanised iron tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe all as specified and as directed. ISI Marked.

Supply and fixing galvanised iron tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe all as specified and as directed. ISI Marked.

Supply and fixing in repairs bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repairs chromium plated pillar taps with capstan heads, chromium plated, screwed down high pressure of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.

Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.

Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed.

Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and as directed.

Supply and fixing in repair looking mirror with PVC moulded frame and hard board back white colour of size 450 x 600mm complete all as specified and as directed.

Supply and fixing in repairs PVC valveless syphon action type low level flushing cistern 8 - 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed. Makes: - Parryware (Slimline) / Hindustan Sanitaryware / Prayag Cat Part No 501.

Supply and fixing in repair 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two no's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing in repair water closet white vitreous china ware 'Orissa' pattern of size 580 x 440mm with integral foot rest 'P' or 'S' trap front or back intlet including provision of PCC (1:2:4) type B-1 and provision of cement concrete bedding and making good the dismantled surface and connection flush pipe (rates also including for taking off unhygenic old water closet) 15mm dia PVC connection 450mm long complete all as specified and as directed.

Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and as directed.

Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete including fixtures and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour in replacement for submain wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 4 run 6 Sqmm for phase and neutral and two run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for complete point wiring with 1.5 Sqmm single core multistranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall, plastering after concealing conduit including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc with one run of 1.5 Sqmm for phase for inverter wiring and including making good the disturbed surface as per existing complete all as specified and as directed by Engineer-in-Charge for the following: -

Description all as per Ser item No 96.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board with inverter wire complete all as specified and as directed.

Description all as per Ser item No 96.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board without inverter wire complete all as specified and as directed.

Description all as per Ser item No 96.00 here-in-before but for one bell / buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sqmm size with inverter wire complete all as specified and as directed.

Description all as per Ser item No 96.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair modular switch 1 way 6A, 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in repair modular socket 6A - 5 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in repair modular switch 1 way 16A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in repair modular socket 6A/16A - 6 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in repair modular bell push 6A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in repair calling bell Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

Supply and fixing in repair ceiling rose, 3 phase / PVC / polycarbonate isolated body complete all as specified and as directed.

Material and labour in replacement for fan regulator stepped electronic type suitable for AC, 240 V complete all as specified and as directed.

Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement for self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement for LED light fittings 1 x 20 W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement for LED light fitting 1 x 9 W / 1 X 10 W bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down existing unserviceable ceiling fan repair / maintenance including replacement of unserviceable spare parts i.e. bearing, bush, PVC connector, PVC clamp, canopy, capacitor including painting, rewinding of any make / type and size (1200 / 1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specification including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single phase, 230 V of size 300mm sweep with blades and frame and louvers including taking down old one and deposited to MES store. Making holes for 300mm exhaust fan of suitable shape and size into or through brick walls including plastering for making good to the original surfaces of any description disturbed including painting / distemper matching with the existing colour including taking down old one and deposited to MES store complete all as specified and as directed. Note: - The rates includes for making good to the original surfaces of any description disturbed including painting / distemper matching with the existing colour.

Supply and fixing in replacement of vertical distribution board (V.TP&N) 4 way double door suitable for MCCB 125 Amp 16 KA four pole as incomer and outgoing 4 No's TPN and should be IP-43 protected with copper bus bars, neutral links, earthing bar including taking down old unserviceable distribution board / MCB any type complete all as specified and as directed. Note: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings.

Supply and fixing in replacement 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 63 Amp complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour with replacement of distribution board double door sheet steel phosphatised powder painted for MCB / distribution board with copper bus bar and neutral link earthing stud TPN 4 way 415 volts doubled door including taking down old one complete all as specified and as directed.

Supply and fixing 415 V 10 KA 'B' curve miniature circuit breaker (MCB) of TPN 100 Amp poles and current carrying capacity in the distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement of 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement LED strip 25 watt on ceiling of roof complete all as specified and as directed.

Supply and fixing in replacement SMPS for LED strip 25 watt complete all as specified and as directed.

Supply and fixing in replacement LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and as directed.

Supply and fixing MCB distribution board metal body enclosure 2 way SPN with MCB 6 Amp for security light control switches complete all as specified and as directed.

Supply and fixing in replacement and fabrication security light bracket made out of 32mm light grade GI tubing suitable for 45 watt LED light grade upto 1.2 metre length, bend to shape suitable with necessary mild steel clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc and including taking out unserviceable bracket and removing from site of work complete all as specified and as directed.

Provision of neon sign board including electrical fittings with letters written as 'AGE B/R MIRAN SAHIB SUB DIVISION' or as per sample including taking down old one complete all as specified and as directed by Engineer-in-Charge.

Provision of neon sign board including electrical fittings with letters written as 'MES POWER HOUSE MIRAN SAHIB MIL STATION 11 KV RECEIVING STATION' or as per sample including taking down old one complete all as specified and as directed by Engineer-in-Charge.

Material and labour in replacement for earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 precast RCC cover slab using reinforcement with suitable handle made of round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and making good bottom surface for laying / removing of cable complete all as specified and as directed in hard soil.

Supply and laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 25 Sqmm, 3.5 core in and including taking out old one complete all as specified and as directed.

Material and labour for sand filling in cushioning bed of cable and consolidation complete all as specified and as directed.

Supply and laying including replacement of common burnt clay building sub class `B' bricks, laid over sand cushioning laid at right angle along with cable complete all as specified and as directed.

Returning filling in excavated soil in trenches, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removal of excavated any type of soil to a distance not exceeding 50m complete all as specified and as directed.

Supply and laying in repair GI tubing light graded including all accessories for encasing cables for mechanical protection, laid under plinth / floors / path culverts with complete accessories such as bends / sockets / reducers / saddles including necessary threading / drilling works of sizes (Mild steel work will be measured under separate item in schedule) 40 mm complete all as specified and as directed.

M/S VED PAUL MAHAJAN

M/S A TO Z ENGINEERS

M/S Sukhmani Construction Co.

J P TECHNO