Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹22.6 L+₹35,610.40 (1.60%)Rejected-Finance | L2 | Rejected-Finance Being Not L1 Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DSSC
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
UPDRADATION OF TOILETS AT NAVAL WG AND STY ROOM AT DSSC WELLINGTON.
2022_MES_552280_1
8266/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹40,000
Yes
29 Oct 2022
17 Sept 2022
21 Oct 2022
17 Sept 2022
19 Oct 2022
1 Oct 2022
Amount
B/R PORTION Demolition of reinforced cement concrete in Roofs, floors (other than ground floors, beams, staircases, landing,chajjas and similar suspended work and removing debris from site all as specified and as directed.
M & L for providing 30 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding / levelling course, kerbs, or chamfered on edges, finished even and smooth with using extra cement and mixed with liquid water proofing compound all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
M & L for 5mm thick screed bed or bedding layer of cement mortar (1:3) when the padding concrete is green for floor finishes and mixed with liquid water proofing compound complete all as specified and directed. Note : Liquid WPC shall be measured and paid separately.
M & L for 3 mm thick APP modified waterproofing membrane ,weighing not less than 3.6 Kg/Sqm reinforced with non woven polyester matt black finished weighing not less than 160 g/Sqm having softening point not less than 150 degree celcius longitudinal tensile strength not less than 300 N/Sqcm , 10 cm overlap and 15 cm for end laps , overcoat of bitumen primer @ of 0.30 Kg/Sqm and finishing with bituminous aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacturer's instruction and as directed by Engr-in-Charge. Note:-The work shall be carried out by authorised applicator of manufacturer.
Supply only liquid waterproofing compound all as specified and as directed.
M & L for preparation of the surface clean from loose particle and grind the surface and further applying one coat of epoxy primer of Make : Asian Paints Smartcare Epoxy Primer or equivalent in Dr. Fixit/ STP/ Fosroc Chemicals or equivalent as approved by GE, as 100 gms per Sqm and further applying high build elastomeric warerproofing coating based on pure, hydrophobic polyurethane, cold applied of spray/brush applied, membrane with an elongation of 550% and tensile strength of 2.5N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min 45 as per ASTM D 2240. The system includes final base preparation, water based primer and applying Smart Care PU Magnum or approved equivalent in two to three coats to achieve a min, thickness of 1.2mm etc. complete as per manufacturer's specifications and as directed by Engr-in-Charge. Note :- (i) Application should be done by Authorised applicator and it should get approval prior to execution of GE. (ii) Ponding test to be conducted (rate to be included in the quoted rate by the contractor)
M & L for broken bricks of guage 63mm but n.exc 100mm deposited, spread and levelling in layers complete all as specifed and as directed.
M & L for PCC (1:4:8) type D- 2, (using 40mm graded stone aggregate) 100 mm thick, as in sub base of floors and the like finished even and fair to receive the topping layer complete all as specified and as directed.
M & L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 40mm thick, as in floors and the like finished even and smooth without using extra cement, to an uniform layer in level, for receiving the wooden floor system for Squash Court all as specified and as directed.
Taking down cement or cement lime plaster of any description on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc., and removing unserviceable debris off the premises all as specified and as directed.
Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M & L for Precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and as directed.
M & L for precast cement concrete solid building block or slab 10cm thick (1:3:6) type C-1 (with plain or interlocking joints as directed) setting in mortar, complete, in walls in CM (1:6) complete all as specified and as directed.
M& L for rendering 15mm thick in CM (1:6) mixed with liquid WPC as per manufacturer's instruction on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
Taking door frame with shutter (without taking off shutters from the frames) n. exc. 1.5 Sqm each all as specified and as directed.
Taking door Chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each all as specified and as directed.
Taking aluminium partition with frame or frames with shutter (without taking off shutters from the frames) exc 1.5 Sqm each all as specified and as directed.
Forming jambs, etc. to openings (to foregoing item) in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing, jointing and pointing to match with existing work complete all as specified and as directed.
M & L for UPVC door with shutters all as per manufacturer's instruction and as per following specifications all as directed :- (i) The construction profile for UPVC door shall be overall frame sectional size 60 x 58 mm with wall thickness 2.70 +/- 0.2 mm extruded sections. The corners shall be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2 mm +/- 0.2 mm. (ii) The door shall be fixed to walls using 8 mm dia 80 mm long MS screws minimum 3 Nos on each side. (iii) The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05 x 16 mm & 2 mm thick. (iv) The bottom portion of door shutter shall be provided with UPVC board 5 mm thick & 1 mtr in height and the balance shall be glazed excluding the shutter frame area. The shutter shall be fixed to frame using 3 Nos of 3D hinges. (v) The door shutter shall be provided with 5mm thick sheet glass & 5 mm UPVC board with EPDM rubber gasket, one motice lock with powder coated handles and two numbers powder coated MS tower bolts Make : Madhu Industries/ AMD Overseas Ltd / Gadli Industries/ Simta Astrix
M & L for UPVC windows with glazing, white colour provided all as per manufacturer's direction and following specifications all as directed :- (i) The profile for construction of UPVC window frame shall be made of UPVC material confirming to IS 10151. The frame shall be made of extruded UPVC section having overall dimension of 65 × 50 mm having wall thickness 2 mm ± 0.2 mm (ii) Corners of wall frame shall be joined by MS galvanized brackets, joints mitred and plastic welded . (iii) The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iv) The profiles should be single chamber system which shall provide high insulation properties. (v) The window system should be glazed with 6 mm thick plain glass fixed in window frame as per manufacturer's instruction . Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engg-in-Charge. Make : Madhu Industries/ AMD Overseas Ltd / Gadli Industries/ Simta Astrix
M & L for UPVC fixed ventilators with glazing all as per manufacturer's direction and following specifications :- (i) The construction profile for UPVC ventilator frame shall be made of PVC matereial confirming to IS 10151. The Ventilator frame shall be made of extruded UPVC section having overall dimension of 60 ×60 mm having wall thickness 2.5 mm ± 0.2 mm . (ii) Corners of wall frame shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded . The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iii) Glazing shall be provided with 5mm thick frosted glass fixed with appropriate size beading as per manufacturer's specifications. Make : Madhu Industries/ AMD Overseas Ltd / Gadli Industries/ Simta Astrix
S & F for second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S & F for second class hard wood 35 mm thick plain, framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S & F 150mm aluminium anodized tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and as directed.
S & F 100mm mild steel tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and as directed.
S & F 300mm aluminium anodised, sliding bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and as directed.
S & F 150mm extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed.
S & F 140mm size floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and as directed.
M & L for providing and fixing powder coated aluminium (minium thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with for doors, windows, ventilators and partitions (fixed partitions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, complete all as per architectural drawings and as directed.
M & L for 4.8mm thick frosted Sheet glass, ordinary quality to be fixed in aluminium section in square or rectangular exc 0.5 Sqm in each pane complete all as specified and as directed.
M & L for 4.8mm thick Sheet glass, ordinary quality to be fixed in aluminium section in square or rectangular exc 0.5 Sqm in each pane complete all as specified and as directed.
M & L for prelaminated particle board 9mm thick exterior grade prelaminated both side with decorative choice laminations fixed with screws to timber frame work as in wall panelling or partitions complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed complete to walls and ceilings or laid in floors all as specified and as directed.
Fixing only 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.
S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed complete to walls and ceilings or laid in floors all as specified and as directed.
Fixing only 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.
S & F in repairs 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S & F in repair rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position incl 20 mm dia ball brass valves, high presured with polyethene float and fly nut complete, screwed for iron pipe all as specified and as directed. Make : Sintex/ Polycon/ Rotex/ Infra/ Plasto/ M/s Vectus Industries Ltd.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) all as specified and as directed.
S & F for 75mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F for 110mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F for 160mm bore PVC (SWR) pipes type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps or laid in floors all as specified and as directed.
S & F for 40mm bore PVC (SWR) pipes, type 'B' single socketted, in any length, with elbow, fixed to walls with suitable MS clamps or concealed in wall and floor all as specified and as directed.
S & F PVC (SWR) bends 75mm bore all as specified and as directed.
S & F PVC (SWR) bends 110 mm bore all as specified and as directed.
S & F PVC (SWR) bends 160 mm bore all as specified and as directed.
S & F PVC (SWR) bends 40 mm bore all as specified and as directed.
S & F PVC (SWR) branch piece, double (double Y) 75mm dia all as specified and as directed.
S & F PVC (SWR) branch piece, double (double Y) 110mm dia all as specified and as directed.
M & L for taking down 150mm CI pipes and fixing on the same location with rawl plug screws and wooden cleats etc. compete all as specified and as directed.
S & F in repairs 150mm dia CI bends or elbows, square or obtuse complete all as specified and as directed.
S & F in repairs 150mm dia CI shoes all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed.
M & L for RCC (1:2:4) (Nominal Mix) type B-1 (using 20mm graded stone aggregate) as in arch beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.
M & L for use and waste of timber as in form work to sides and soffits of roof beam, beam haunchings, girders, bressummers, lintels ,cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc., for fair finished surfaces of concrete flat all as specified and as directed.
M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
Description all as per Item No 58 above but 5 mm and over upto and including10 mm dia as in stirrups complete all as specified and as directed.
M & L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required over 15mm thick rendering in CM 1:6 to be fixed flooring, door, windows cladding/ openings and plateform complete all as specified and as directed.
M & L for digital non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular ) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M & L for digital glazed ceramic coloured tiles of size 600mm x 300mm x 7 mm thick in vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering layer/ backing coat of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
M & L for vitrified ceremic joints less tiles 8 to 10 mm thick light shade (square/rectangular). area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floors, etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
Description all as per item No 63 above but on vertical surfaces, laid over and including 10 mm thick rendering/ backing coat in CM (1 :4) complete all as specified and as directed.
S & F in repairs Vitreous China coloured WHB of Make : Jaquar, Cat No : CNS-WHT-705 or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE, oval shaped counter top of min size 595 x 420 x 200 mm including waste coupling, PVC waste pipe etc. complete all as specified and as directed.
S & F for 15mm dia CP Pillar taps complete all as specified and as directed. Make : Jaquar, Cat No : KUP35001PM or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F in repairs Vitreous China wash down water closet , colour white, closed pattern with flat bottom and soft close seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including cistern complete all as specified and as directed. Make :Parryware (Cascade Classic), Cat No: C0217 (Coupled Closet) & C0711 (Cistern) or equivalent in Prayag/ Hindware/ Jaquar/ Cera or equivalent as approved by GE
S & F in repair Vitreous china Squatting pattern long pan size 580mm white with 'P' or 'S' trap front or back inlet and foot rest pattern water closet (IWC) complete including 10 ltr flushing cistern and bend pipe complete all as specified and as directed.
S & F in repairs urinal magnum half stall type including spreader and ceramic partition complete all as specified and as directed. Make : Parryware, Cat No: C0575 (For Urinal Half Stall type), Cat No : C08095 (For Spreader), Cat No : C0571/50 (For Urinal Partition) or equivalent in Prayag/ Hindware/ Jaquar/ Cera or equivalent as approved by GE
S & F 12mm thick toughned glass to be fixed in position with suitable SS 'L' clamps and fittings etc all as specified and as directed.
S & F in repairs toilet paper holder of stainless steel fixed to wall with chromium plated (CP) brass screws all as specified and as directed. Make : Jaquar, Cat No : ACN-1151N or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F in repairs hand drier automatic type complete all as specified and as directed. Make : ABS hand drier KH07 or Kallerians or equivalent in Prayag/ Hindware/ Parryware/ Cera/ Jaquar or equivalent as approved by GE
S & F in repairs 15 mm dia angle cock fancy type chromium plated with long shank and cup all as specified and as directed. Make : Jaquar, Cat No : ORP - 10053PM or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F in repairs CP Health faucet with flexible tube 1 Mtr long complete all as specified and as directed. Make : Jaquar, Cat No : ALD 579 or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F CP two way bib taps 15 mm bore complete all as specified and as directed. Make : Jaquar, Cat No : ORP -10041PM or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.
S & F for 32mm bore brass chromium plated bottle trap for wash hand basin with inlet and outlet, screwed for pipe or connections and with one cleaning cap and fixed complete all as specified as directed.
M & L for 100 mm dia PVC floor trap with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 all as specified and as directed.
S & F Corner glass shelf complete all as specified and as directed. Make : Jaquar, Cat No : ACN-1173 or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F Soap dispenser complete all as specified and as directed. Make: Jaquar, Cat No : AKB-35735 or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F in repairs Towel ring complete all as specified and as directed. Make : Jaquar, Cat No : AKB-35721 or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
S & F PVC connection 15 mm size with PTMT Nuts, long 450 mm complete all as specified and as directed.
S & F CP bib taps 15 mm bore complete all as specified and as directed. Make : Jaquar, Cat No : ORP - 10037PM or equivalent in Prayag/ Hindware/ Parryware/ Cera or equivalent as approved by GE
M & L for 75mm dia of outlet PVC (SWR) multi floor trap with CP grating including jointing with solvent complete all as specified and as directed.
M & L for providing 75mm thick PCC (1:3:6) (type C-2), (using 40mm graded stone aggregates) as in subbase complete all as specified and as directed.
S & F factory made machine pressed chequered cement concrete coloured tiles of size 300 x 300 x 22mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , laid over and including 20 mm thick screed bed in CM (1 :4) complete all as specified and as directed.
M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed.
Fixing only machine pressed precast concrete interlocking paver block any shape, size and thickness over and including M Sand cushioning complete all as specified and as directed.
M & L for preparing new or previously untreated wooden surface and applying two coats of synthetic enamel paint exc 10 cm width or girth over and including one coat of pink primer complete all as specified and as directed.
M & L for preparing old plastered/unplastered surfaces of walls and applying two coats all weather acrylic emulsion (anti-fungal) paint over a coat of primer complete all as specified and as directed. Make : Asian Paint Apex Ultima or equivalent in Berger Paints/ Nerolac Paints/ Shalimar Paints/ Dulux Paints or equivalent as approved by GE.
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over and including one coat of wall care putty complete all as specified and as directed.
M & L for complete removal of existing treatment from old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with brush/roller over and including one coat of wall care putty complete all as specified and as directed.
M & L for preparing old painted wooden surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.
M & L for preparing old painted steel surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.
M & L for complete removal of existing treatment from old ceiling surfaces applying two coats of oil bound distemper over and including one coat of primer and one coat of wall care of putty complete all as specified and directed.
Demolition and breaking up 150 mm bore Concrete / SGSW /AC drain pipes of any description and in any position all as specified and as directed.
M & L for salt-glazed stoneware drain pipes 150 mm (internal dia) laid in trenches and jointed complete all as specified and as directed.
M & L for PCC (1:3:6) type C-2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed.
M & L for cutting into existing manholes of 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all as specified and as directed.
Labour only for cleaning of manholes upto 1.50mtr depth and size complete and throwing the waste/mud out of MoD area all as specified and directed. Note : Cleaning of manhole shall be carried out by mechanically and the rate quoted shall deemed to be included this aspect.
Taking down old, worn out tip-up chairs and making good the disturbed surfaces complete all as specified and as directed.
S & F for 40mm Odourless Urinal waste coupling to be fixed in urinal complete all as per manufacturer's instructions and as directed. Make : Zerodor Waterless Urinal Technology/ Falcon/ Hindware Aquafree Waterless Urinals or equivalent as approved by GE.
E/M PORTION Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down old sub-main wiring incl fixture & fittings etc. and removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge. Note for Item Nos 103 to 105 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for point wiring with two single core 1.5 Sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) concealed in walls/ceiling etc with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Bajaj plast/finolex
(a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.
(b) One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No 106 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. Note for Item Nos 106 & 107 : (i) Modular metal flush boxes shall be measured & paid separately. (ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for sub-main wiring alongwith earth wire of size (2 x 4.00) Sqmm + (1 x 4.00) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) concealed in walls/ceiliong etc with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit-Precision/Bajaj Plast/Finolex Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.
S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061 or techno-commercially equivalent in Legrand/Anchor Roma
S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161 or techno-commercially equivalent in Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKSWW063 or techno-commercially equivalent in Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand/Anchor Roma
S & F concealing modular metal flush box suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma
S & F concealing modular metal flush box suitable for fixing switches/sockets of 4 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX04 or techno-commercially equivalent in Legrand/Anchor Roma
S & F modular cover plate suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma
S & F modular cover plate suitable for fixing switches/sockets of 4 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV04 or techno-commercially equivalent in Legrand/Anchor Roma Note for Item Nos 109 to 116 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/CG/Anchor
S & F Surface and wall mounted LED batten 10 watts 2 feet long 6500K, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit incl taking down old/unsv fittings complete all as specified and as directed. Make : Havells, Cat No:ENDURALINEARNEO BS10WLED865SPCWH or techno-commercially equivalent in Philips/Wipro
S & F Surface and wall mounted LED batten 20 watts 4 feet long 6500K, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit incl taking down old/unsv fittings complete all as specified and as directed . Make :Havells, Cat No:ENDURALINEARNEOB S20WLED865SPCWH or techno-commercially equivalent in Philips/Wipro
S & F, IP >= 20, Class I, Surface mounted LED square shape slim ceiling light fitting 42 W or next higher rating, CRI >= 80, CT >= 5700 K, of size 600 x 600mm (approx dimensions) suitable for ceilings, integrated type, with high efficiency electronic driver, surge suppressor of 2 KV or more & high brightness LEDs, luminaire efficacy > 95 lumens/Watt, power factor >= 0.90, operating range – 140 to 270 V, 50 Hz with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : PLUTOSURFACE2X2 PLS42WLED857S or techno-commercially equivalent in Philips/Wipro
S & F ultra modern, recess mounting, 48W, 6000K (White) LED luminaire of size 4' x 1' suitable for false ceiling with suitable fixing arrangement incl cutting existing false ceiling any type (if req) & matching complete with electronic driver & high brightness LEDs incl making good the disturbed surfaces incl taking down old/existing/unsv light fittings complete all as specified and as directed. Make: Luker, Cat No: LPS4812 WH or techno-commercially equivalent in Havells/Philips Note :- Cutting of existing gypsum false ceiling and making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F ultra modern, Surface mounted, 18W, 6500K LED Elegant surface panel complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No: LNPSRR18 or techno-commercially equivalent in Philips/Havells
Imp Note for Item Nos 118 to 122 : (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates
S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in Legrand/Siemens
S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN004DD or techno-commercially equivalent in Legrand/Siemens
S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No : BB20320C or techno-commercially equivalent in Legrand/ Siemens
S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No:BB10320C or techno-commercially equivalent in Legrand/ Siemens
RAJASEKARAN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .