CERTAIN REPAIRS TO JOINERY ROOF LEKAGE SEEPAGE SUNKEN OF SANITARY ANNEXE KITCHEN INCL RENOVATION OF CERTAIN TOILETS AND KITCHEN IN MD OTM OF AGE BR I AREA UNDER GE EAST LUCKNOW

Amount

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slab complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for providing and applying waterproofing treatment to sound, moisture free concrete surface using Nitoproof 600PF manufactured by Fosroc Chemicals India Pvt Ltd. Nitoproof 600PF shall be liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks up to 2 mm. It shall be applied in two coats at coverage rate of 2kg/sqm. The membrane formed shall confirm to following minimum properties: 1) Elongation : >400% as per ASTM D412 2) Tensile Strength : 2.5 N/mm2 as per ASTM D 412 3) Adhesion in-peel test : >50 N as per ASTM C- 836 4) Recovery from 350% elongation : 95% as per ASTM D 412 5) Water Vapour Transmission 2.3mm film: 0.6 g/m2/hr 6) Initial Hardness Shore A : min 60 as per ASTM D 2240 7) Root resistant : protection screed required No geotextile recommended in between layers as it decreases elongation property of material Membrane Termination shall be done 300 mm above floor level. System includes supply, Surface preparation (crack treatment, coving etc), application and termination of coating all complete as per the fosroc methodology complete all as specified and directed.

M&L for roof treatment with polymeric water proofing membrane consisting of following complete all as specified and directed:- (a) Applying bituminous grade 85/25 primer conforming to IS 702-1988 @ 1.20 Kgs/Sqm (b) APP modifiedd bitumenous membrane minimum weight 3 Kg/Sqm and minimum 3 mm thick reinforced with polyester non wove fabric( wt not less than 150 gms/Sqm) laid on primed surface by heat process, over laps of 100 mm shall be sealed/fused by flame torch application as per manufacturer instruction. (c) applying two coats of bitumen based @ 0.20 Kgs/Sqm aluminium painting on water proofing treatment.

Demolition of sunken floor treatment of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from top of floor level slab and allow it dry completely. (f) Fill the sanitary gaps with sealing compounds complete.

M&L for providing PCC 1:7:12 type F-2 using 40mm graded stone aggregate in sunken slab complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 , 75 mm thick as in plinth protection and flooring and finishing the surface even and smooth without using extra cement.complete all as specified and directed.

M&L for PCC (1:2:4) Type B-1, using 20 mm graded stone aggregate as in Coping complete all as specified and directed.

M&L for smartcare damp block of two coat component acrylic polymer modified cementitious high performance coating( two Componenet) Minimume two coats with coverage 6-7 Sqm /kg/ 2 coats, for positive & negative side wateroroofing, product should have excelent bonding, good waterproofing and unmatched resistance to hydrostatic presure and form highlyelastic film with whitch provides elongation up to 100 as per manufacturer instruction complete all as specified and as directed.

M&L for smartcare hydrolock of two coat component acrylic polymermodifiesd cementitious high oerformance coating( two Componenet) Minimume two coats with coverage 6-7 Sqm /kg/ 2 coats, for positive & negative side wateroroofing, product should have excelent bonding, good waterproofing and unmatched resistance to hydrostatic presure and form highlyelastic film with whitch provides elongation up to 100 as per manufacturer instruction complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

M&L for Preparation of new or previously undercoated surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Preparation of new plastered surface of wall and applying two coats of OBD over a coat of primer on wall complete all as specified and directed.

M&L for Preparation of old surface of ceiling and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old surfaces of wall & applying one coat of cement base paint of approved shade/tint complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy sopts etc and preparation of plastered surfaces and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over Complete all as specified and directed

M&L for providing and applying white care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed.

Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed.

S&F powder coated aluminium anodised frame/chowkat of Aluminium door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed. as per requirement and direction of Engineer in-charge

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type, extruded section.complete all as specified and directed.

S&F in repair 100 mm butt hinges extruded brass,with mild steel hing pin ,bright polished and fixed, type B-11 complete all as specified and directed.

S&F in repair 75mm butt hinges extruded brass,with mild steel hing pin ,bright polished and fixed, type B-12 complete all as specified and directed.

S&F in repair 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 75mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed. complete all as specified and directed.

S&F in repairs 150mm long fancy brass handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge

S&F in repairs 200mm long fancy brass handle for wardrobe shutter complete all as specified and as directed by Engr-in-charge

S&F in repairs 100mm brass Mortice lock (Godrej pattern), vertical type, 4-lever complete all as specified and as directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs complete all as specified and directed.

S&F 18 mm thick solid PVC board one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling, complete all as specified and directed

S&F 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and directed.

S&F floor door stopper as in repair of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F in repair Hat pegs, solid body,125mm to 175 mm brass fancy type, all as specified fixed complete all as specified and directed.

S&F as in repair mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plate including welding if required complete all as specified and directed.

S&F in repairs 50mm dia, polished, hard wood knobs fixed with screw complete all as specified and directed.

S&F in repairs Ball catches with 150 mm long & 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fixing in repair stainless steel wardrope trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

S&F in repair Stainless steel half circle modular type basket of size 28x20x4 inches over stainless steel pipe revolving type with sliding rails complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x20x4 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 20x20x12 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

S&F 125 mm dia CP brass shower rose incl shower arms with or without swivel joints any size including fixing to steel pipe or union add if fixed in repair complete all as specified and directed.

S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair for three layer rotational moulded polyethylene water storage tank of capacity 500 ltrs cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specified and directed.

S&F for in repair three layer rotational moulded polyethylene water storage tank capacity 1000 ltrs cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specified and directed.

S&F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 455 gms) complete all as specified and directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 142 gms) complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe of capacity exc 250 n.exc 500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe of capacity exc 500 n.exc 1000 ltr complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer for mixing hot & cold water with provn for overhead shower with 15mm long bend pipe complete all as specified and directed.

S&F brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed.

S&F brass chromium plated single hole Sink mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, 600x480mm counter top oval shape cascade pattern with pillar tap cast copper alloy ,capstan head CP,PVC connection,CP bottle trap, PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed,complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs.complete all as specified and directed.

S&F in repairs Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type white excluding flushing cistern ,flush pipe and waste pipe complete all as specified and directed.

S&F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets as in repairs complete all as specified and directed.

S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed.

S&F in repair PVC floor trap plain with grating including jointing with solventt in run lead 75/100 mm out let complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and directed.

S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and directed.

S&F CP brass towel rails 20 mm dia and 600 mm long incl chromium plated brass screw and wooden / cleats fixed as in repair complete all as specified and directed.

S&F in repairs PVC cabinet with mirror and door of size 560X410mm complete all as specified and directed.

S&F in repair health faucet for EWC CP hand hold with flexible pipe 1.5m long complete set all as specified. complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed. by Engineer-in-charge.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S&F stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink. complete all as specified and directed.

S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete including taking down old unserviceable sink.complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surfaces 600x300x7/600x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed.

S&F vitrified ceramic tiles dark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry with gray cement and pig mentss over 15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. floor, paving, path etc.

S&F exterior tiles of superior quility300x300/400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified and directed.

Supply and fixing 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc and fixed with ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified and directed.

M&L for 6 mm thick asbestos cement two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed with ‘L’ type or J type or cranked hook bolt.complete all as specified and directed.

S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed.

S&F 2mm thick Colored Fibre glass reinforced translucent corrugated/plain sheeting fixed with coach screw and washer in roof, wall etc wall fixing with self tapping screw complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to Fe-290W (Gde E-265) quality B complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to Grade Fe 410W(Gde E-265 quality `B’ complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified and directed.

M & L for Providing and fixing of E-board 'Everest' or equivalent make 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc complete all as specified and directed..

S&F 5 mm thick hollow PVC Wall panlling including PVC beading at corner and top of any design, fixed on wall as per manufacture instruction complete all as specified and directed.

KUMAR ENTERPRISES

Spectrum Enterprises

M/S SWATI CONSTRUCTION

Powertronix

M/S KAUSHIK CONSTRUCTION

M/s Durga Construction Company

Rakesh Traders