Construction of New Boys Hostel building at UBDT College of Engineering Davangere

Construction of New Boys Hostel building at UBDT College of Engineering Davangere

Excavation in by manual means for foundations of bulidings, water supply ans sanitary lines and electrical conduits etc., either in pits or in trenches 1.5m and above in width, in soft rock without bl...

Providing and injecting chemical emulsion for Pre- constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, t...

Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including...

Earthwork excavation in soil deposits and filling sides of foundation upto plinth in layers not exceeding 20cms. in depth, compacting each deposited layer by ramming after watering with all lead and l...

Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum ma...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Formwork, Centering,& scaffolding Additional % to be added in the finished rates of concrete of building Foundation 5% on finished rate of concrete

Formwork, Centering,& scaffolding Additional % to be added in the finished rates of concrete of building isolated Footing 8% on finished rate of concrete

Formwork, Centering,& scaffolding Additional % to be added in the finished rates of concrete of building plinth beam 50% on finished rate of concrete per cum

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Formwork, Centering,& scaffolding Additional % to be added in the finished rates of concrete of building RCC column 70% on finished rate of concrete per cum Upto plinth bottom specification. Ground Fl...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

do- lintel, cill-Chejja beams and slabs Ground floor

Formwork, Centering & Scaffolding Additional percentage to be added in the finished rates of concrete of buildings RCC Column, cill, Roof beam, Lintel at 70% on finished rate of concrete per m3Ground ...

Ground Floor Roof Beam

Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.4...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as supsended floors, roofs, landings, balconies and likes, thickness upto 200mm i...

do- First Floor Roof Slab

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete...

do- First Floor Staircase

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...

Providing and constructing precast concrete solid blocks with compressive strength not less than 3.5 Newton per sqmm with cement mortar 1:4 masonry (quoin, Jamb, closer blocks ) with solid concrete bl...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames... - GROUND FLOOR

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Fixing of door frame in an existing opening including embeeding frame in floor and walls... Ground Floor

Providing and fixing in position fully panelled shutters of Honne wood for windows with stiles and rails of 30mm thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, l...

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...

Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing in...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing in...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing vitrified glazed tile of approved make, quality & colour of size 600X600X10 mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and joinging with neat cement ...

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smoo...

Supplying PVC ring tite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...

PVC Pipes 32 mm Dia , 10 Kg /Sqm

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. 300 mm

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ,

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Single flow showers with Anti lime jets with Rain, Mist & Massage settings having 1.5m Extendable flexible tube and holder & wall flange made of Stainless steel with all concealed...

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing Wall spout with Button attachment for shower with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.

Providing and fixing Exposed set for single concealed stop cock with basin spout made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

Providing and fixing Single lever wall mixer made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

Providing and fixing Single lever Bib cock Long Nose (Lifting type cold water cartridge) with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories com...

Polyethylene water storage tank with cover and suitable locking arrangement

Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, labour and HOM of equipments with all leads co...

Supplying heavy gauge PVC conduit pipe ........ Dia ..... Mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of ...

b) 32mm dia 2.5 mm thick

c) 40mm dia 2.5 mm thick

First Floor a) 25mm dia 2 mm thick

b) 32mm dia 2.5 mm thick

c) 40mm dia 2.5 mm thick

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm² (Phase & Neutral) & 1x1.0 mm² (Earth wire) FRLS multi strand PVC insulated copper wire...

b) Medium Point up to 3 Mtr up to 6 mtr from tapping

c) Long Point above 6 mtr upto 10 mtr from tapping

First Floor a) Short Point up to 3 Mtr from tapping point to out let

b) Medium Point up to 3 Mtr up to 6 mtr from tapping

c) Long Point above 6 mtr upto 10 mtr from tapping

Supplying heavy gauge PVC Conduit Pipe .... diathick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement pla...

b) 32mm dia 2.5 mm thick

c) 40mm dia 2.5 mm thick

First Floor a) 25mm dia 2 mm thick

b) 32mm dia 2.5 mm thick

c) 40mm dia 2.5 mm thick

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Ground Floor. 1) Using Group "A" materials. a) 6Amps one way

b) 6 Amps 3way socket

c) Stepped Fan Regulator

d) 6Amps Bell push

e) 16 Amps one way switch

f) 32 Amps DP Switch

g) 6/16A Universal Socket

h) TV/Telephone Socket

First Floor. 1) Using Group "A" materials

b) 6 Amps 3way socket

c) Stepped Fan Regulator

d) 6Amps Bell push

e) 16 Amps one way switch

f) 32 Amps DP Switch

g) 6/16A Universal Socket

h) TV/Telephone Socket

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

First Floor a) 1-3 Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

First Floor 1) Using Group "A" materials.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

First Floor a) 1.5 sqmm

Supplying and fixing of T8 36/40W Fluorescent Tube with 36W power consumption with initial lumen of 2750 (3000 deg K / 4000 deg K) with rated avg life of greater than 10000 hrs. Operating voltage rang...

Supplying abnd fixing of 5'-80 W of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Supply Gr...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and withdrawble ball be...

Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod.

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

First Floor On wall/ ceiling / Rafter / Gi

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing "S" hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary l...

Extra length of GI pipe of class B 19mm dia for down rod. Ground Floor

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. First Floor 15" Sweep (450 mm)

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote

First Floor Ding Dong Bell

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40 mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. Ground Floor Copper strip

Ground Floor Copper Strip

First Floor GI Strip

First Floor Copper strip

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

First Floor III - Double Door 4 Way TP & N

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Ground Floor 50-63 A TPN

First Floor 6-32 A DP

First Floor 50-63 A TPN

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Ground Floor 160 A 25 kA

First Floor 100 A 25 kA

First Floor 160 A 25 kA

Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

First Floor 16 SWG

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mo...

First Floor 100 A 4 x 30 x 6 mm Alumin

Supplying & Fixing angle iron frame work fabricated out of MS angle iron. And MS flat… with bolts, washers etc., and painted with 2 coats of red oxide and then 2 coats of approved paint. GROUND FLOO...

Supplying of LT UG cable having alluminium conductor PVC insulated, sheathed, galvanized steel wire/steel tap armoured cable with PVC outer sheating 1.1 KV class -1 Class A PVC cable. 3.5 core

Labour Charges for Laying of 1.1 KV class UG cable supplied agency in existing trench GI pipe/stoneware pipe/on wall/on pole as per requirement. Ground floor

Digging of trench of 0.6m Deep x 0.50 mtrs wide refilling the trench to the required ground level and consolidating etc., complete

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter

on existing panel/wood board.VOL.06

Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable for Ammeter

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) Ground Floor 63A

Supplying and drawing UTP-CAT 6E LAN cable.

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.

Supplying & Fixing HRC Fuse Link on Existing Switch Fuse base with W Loss as per IS-13703

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. Ground Floor 100 A

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...