Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance INDEX NO B 33 NC R O KRALPORA DISTT BUDGAM SRINAGAR J K 190019 | SRINAGAR | BUDGAM | JAMMU AND KASHMIR | 190019 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance WATHORA CHADOORA DISTT BUDGAM KASHMIR 191113 J K | CHADOORA | BUDGAM | JAMMU AND KASHMIR | 191113 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
25 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
SPL REPAIR OF BLDG NO P-69, SEWAGE LINE AND GI PIPE CONNECTION AT MANASBAL AND OAF UNDER GE 970 EWS
2023_MES_582764_1
GE 970 EWS-74/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹76,000
Yes
3 Apr 2023
24 Feb 2023
27 Mar 2023
24 Feb 2023
25 Mar 2023
11 Mar 2023
Amount
Demolition brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Material & labour brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and directed
25 mm thick PCC 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in floor surfaces, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C2 (40mm graded aggregate) as in plinth protection finished even and smooth complete all as specified and directed
Glazed ceramic tiles coloured pattern as required 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with after including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Factory made machine pressed chequered cement concrete tiles 200mm x 200mm x 25mm thick as in floors set and jointed in neat cement slurry and pointed grey cement and no pigment over with and including 15mm thick screed bed in CM (1:6) complete all as specified & directed
Rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished fair and even complete all as specified and directed
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 3mm thick putty complete all as specified and directed.
Preparation of new plastered or unplastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Complete removal of existing treatment on wall surface and applying two coats of oil bound distemper including preparation of old surface complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply & fixing in repair anodised aluminium snap grid frame work for false ceiling complete all as specified and directed
Supply & fixing in repair Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed
S&F Veneered decorative ply wood, 9 mm thick, grade I (with BWR resin), decorative face veneers on both face fixed with nails to timber frame work in wall, ceiling, flat or sloping incl dismantling wall and ceiling boards fibre, pulp insulation etc or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames). complete all as specified and directed.
S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.
Factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed
Factory made 2nd class hard wood 35mm thick plain framed panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed
Solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening, edges will be painted to match with printed sheet complete all as specified and directed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed
Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
Supply & fixing in repair 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed
Supply & fixing in repair galvanized mild steel wire cloth, 0.63 mm nominal dia or wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed
Butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed
200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed
Aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long dia 16 mm complete.ISI Marked, complete all as specified and directed.
Aluminium handle, cast type, anodized 100 mm size ISI Marked complete all as specified and directed
S&F in repair Harrison rail (Curtain rod//drapery rod), 20mm dia, powder coated with and including fancy type PVC bracket 2 Nos of each opening and side stopper powder coated of required shape and size 2 Nos of each opening complete all as specified and directed
S & F in repair 15 mm bore CP bib taps cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
Taking up or down 15 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 16mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 20mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Taking up or down 25 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 25mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Taking up or down 50 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 50mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Taking up or down 90 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 90mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Supply and fixing in repair for Soap dish, MS, CP of approximate size 160x160x90mm, complete all as specified and directed.
S & F in repair 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
Supply and fixing in repair rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity ISI Marked incl 15 mm dia ball valve high pressure of PVC with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed
Supply and fixing in repair vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, CP waste coupling complete all as specified and directed
Supply and fixing in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe complete all as specified and directed.
Supply and fixing in repair for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.
Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
Supply and fixing in repair 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint lead in trenches or in floor, complete all as specified and directed.
All as per item no. 57 above but 75mm bore pipe ---ditto---
Supply and fixing in repair PVC, SWR bends (any radius) of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR bends (any radius) of 75mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR cowls of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR floor trap outlet diameter 75mm, with grating including jointing to waste pipe complete all as specified and directed.
S & F in repair PVC connection commercial quality 450mm long with PTMT nuts of 15mm bore and fixed complete all as specified and directed
S & F in repair PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed
Supply and fix vitreous china, wash down water closet pan, white, Pedestal pattern WC (excluding flushing cistern and flush pipe), including PVC seat cover fixed in repair complete all as specified and directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repair swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.
Supply and fixing in repair shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms complete all as specified and directed.
Taking down old and unserviceable submain wiring/ service cable any size of two core including earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface, all as directed by Engr-in-charge.
Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC conduit (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 71 here-in-before but socket out let 3 pin, 5 Amp on same board with other switch.
All as per description of srl item No 71 here-in-before but socket out let 3 pin, 5 Amp on independent board with other switch.
All as per description of srl item No 71 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket out let 15 Amps on independent board.
Switch piano, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .
Socket outlet 3 pin, 5 Amp, 230 V AC complete all as specified and directed.
Switch socket combination 5 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed.
Ceiling rose 2/3 terminals of size 50mmx65mm surface type complete all as specified and directed
Electronic fan regulator, stepped type, hum free socket type suitable to control speed of fan 0-100%, 230 V etc complete all as specified and directed.
Lamp holder(in replacement) insulated body with back plate suitable for batten fitting including LED lamp of capacity 9 watts complete all as specified and directed..
Supply and Fixing in repair 1X18 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 with all accessories and connecting up with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. make : BAJAJ /Philips/CG.
Supply and fixing in repair 1x10 W LED 6000k (2 ft long) decorative ultra slim square prfile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and itegrated electronic driver complete with lamp complete all as specified and directed.
Supply and Fixing in repair MCB DB SPN 12 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
Supply and Fixing in repair Sheet metal enclosures for DB's with 200 Amp rated bus bar single door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed.
MCB TPN 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB SPN 40 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
Supply and Fixing MCB SPN 63 Amp, 240 volts, 10 KA, complete all as specified and directed.
Supply and Fixing MCB SP 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.
Sub main wiring with two runs of single core PVC insulated (FRLS-H) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS-H) unsheathed cableas earth wire continuity conductor complete all as specified and directed. Note : (i) Two run of cable 4 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Sub main wiring with two runs of single core PVC insulated (FRLS-H) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS-H) unsheathed cableas earth wire continuity conductor complete all as specified and directed. Note : (i) Two run of cable 6 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
M&L in repair for Earthing complete with galvanized steel plate electrode 60cm X60cm X6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron, protected by galvanized steel pipe 15 mm bore (light grade) upto 57.5m & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 20mm thick RCC(1:2:4) type B-1 cover & frame etc) including GI protecton pipe for earth lead complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed.
Supply and fixing in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe of dia 20 mm complete all as specified and directed.
Supply and fixing in repair PPR gate valve (brass insert) of size 20 mm dia including connection and testing complete all as specified and directed.
Supply and fixing in repair PPR gate valve (brass insert) of size 25 mm dia including connection and testing complete all as specified and directed.
Supply and fixing in repair PPR gate valve (brass insert) of size 50 mm dia including connection and testing complete all as specified and directed.
Supply and fixing in repair cast iron sluice valve 100mm dia (ISI marked) with both end flanged with iron wheel handle for clockwise closing brass spindle heavy duty PN-1.6 class. including gaskit joint nut, bolts & washers all as requirement of site complete all as specified and directed.
Lagging on pipes used in water supply or plumbing all around with 40 mm thick bonded mineral wool performed SNAP ON pipe section of density 144 Kg/cm confirming to IS: 9842 provide with and including chicken mesh wire netting 25 gauge, 20mm mesh and 0.01mm aluminium foil for 15 mm dia of GI pipe complete all as specified and directed.
Lagging on pipes used in water supply or plumbing all around with 40 mm thick bonded mineral wool performed SNAP ON pipe section of density 144 Kg/cm confirming to IS: 9842 provide with and including chicken mesh wire netting 25 gauge, 20mm mesh and 0.01mm aluminium foil for 20 mm dia of GI pipe complete all as specified and directed.
Supply and fixing in repair ceiling fan with blades and down rods and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct currrent motor etc complete all as specified and directed.
Supply and fixing in repair of exhaust fan 380mm sweep, heavy duty with speed of 900 rpm, metal body, single phase complete all as specified and directed.
Supply and fixing in repairs decorative garden light (landscape lighting) made up of high grade unbreakable polycarbonate materials of capacity 9W LED complete all as specified and directed. Make : Bajaj Cat Part No BGBOM 650 9W LED (Tulip) or equivalent/Havells/CROMPTON. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) The contractor should include the rates for PCC as required and nut bolts for fixing the light in the quotated rate.
M&L for dewatering of contaminated waste effluent from septic tank soakage well of any capacity by sewer jetting cum suction machine vehicle/ honey sucker machine vehicle from any location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed.
M&L for Cleaning of septic tank of any capacity and depth incl inlet chamber, outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid/semi solid sludge to liquid state by using extra water provided by the contractor if required and getting out through sewer jetting cum suction machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed.
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.
S&F for asbestos cement pipes 100mm bore laid in trenches and jointed on concrete bed including packing of collars of pipe in cement mortar 1:3 with and including demolition and breaking up drain pipes, 100 mm dia drain pipe of any type set in cement mortar complete all as specified and directed.
All as per item no. 107 above but dia 150mm bore.
Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 100mm dia pipe in cement concrete 1:2:4 complete all as specified and directed.
All as per item no. 109 above but dia 150mm bore.
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed.
Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccificallt provided for as directed.
M&L for RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement 1:4 complete all as specified and directed.
S&F TMT Mild Steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F TMT Mild Steel bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed.
Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.
Material & labour for cement concrete 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 110mm junction single (Single 'T') equal or unequal complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 75mm junction single (Single 'T') equal or unequal complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
M&L for Construction of Brick Masonary valve chamber of size 600mmx600mmx600mm (Internal dimensions) with PCC 1:4:8 type D-2 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in soft/loose soil, MS sheet cover 3.15mm thick and MS equal angle iron 40mmx40mmx5mm frame as per existing size with locking arrangement embedded in PCC and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.
M&L for Construction of Brick Masonary valve chamber of size 1500mmx2000mmx1500mm (Internal dimensions) with PCC 1:4:8 type D-2 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in soft/loose soil, MS sheet cover 3.15mm thick and MS equal angle iron 40mmx40mmx5mm frame as per existing size with locking arrangement embedded in PCC and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.
Sand cushioning to underground cable with clean dry sand locally available 8cm thick before laying the cable and 15cm above the cable,stretching and testing of cable lcomplete all as specified and directed. Note : For payment purpose , punned thickness shall be measured and paid.
Brick protection with brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches with width of brick parallel to the length of cable complete all as specified and directed.
Supply, laying, jointing and testing of 120 Sqmm 4 Core, XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls including taking down old unservicable cables, complete all as specified and directed. Note:- Excavation, Earthwork, sand cushioning and brick protection shall be measured and paid for separately.
Supply and fix cable joiniting kit for 11 KV grade cable for outdoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, AI conductor cable of size 120 to 185 SQMM.
S&F GI pipe light grade 80mm dia in trenches for cable protection on pole / on wall complete all as specified and directed.
Boing of holes under road 9-11 Meter long, pavement, hard standing by trenches technique and necessary machine include inserting of HDPE pipe of bore 80mm dia GI pipe.
M/S B S CONSTRUCTIONS
Javeed And Co
G N Constructions
M/s Nasir Rasool Dar
M/S ADIL CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .