Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 172029 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹5.0 L+₹37,933.14 (8.27%)Rejected-AOC | L2 | Rejected-AOC rejected | |
| 3 | L3₹5.1 L+₹54,543.78 (11.9%)Rejected-AOC MANDI DIVISION NO II HP PWD MANDI | MANDI | HIMACHAL PRADESH | 175001 | L3 | Rejected-AOC rejected | |
| 4 | L4₹5.7 L+₹1.1 L (24.3%)Rejected-AOC | L4 | Rejected-AOC rejected |
Tender Value
Refer Docs
EMD Value
₹13,381
Closing Date
16 Feb 2021, 11:00 amClosed
Executive Engineer
JSV Division Rohru
SH C o Storage tank of 25000 ltr capacity Prov Laying and Joining GI Pipes Light Class 32mm dia 3200 Rmt and 25mm dia 600 Rmt Phase 2nd JOB 2
2021_HPIPH_44160_1
IPH-RD-AB-Tender 20-12147-70
Open Tender
Civil Works
Item Rate
180 days
Rohru Town
Tender Document
8 documents required · 8 mandatory
₹250
Yes
EE Rohru
₹13,381
Yes
13 Jan 2022
9 Feb 2021
16 Feb 2021
9 Feb 2021
16 Feb 2021
9 Feb 2021
Amount
Excavation in foundation trenches etc.in earth work,lift upto 1,5 meters staking the excavated soil not more than 3mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required in to plinths sides of foundation et
Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm( Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer in Charge
Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :-
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads and lifts as per the direction of the Engineer - in - Charge.
Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.
Edge of slab and break in floor 20 cm wide
Providing and laying cement concrete work 1:1.5:3 (1cement :1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcment for reinforcement concrete work in :-
i) Foundation and plinth (bed) with in all leads and lifts as per the direction of the Engineer - in - Charge.
ii) Wall (any thickness but not less than 0.1 m thickness) attached pilasters,buttresses, plinth and string courses etc. from top of foundation level up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.
Providing mild steel/tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.
Providing & laying CC 1:2:4 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:- with in all leads and lifts as per the direction of the Engineer in charge.
In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level
Providing and fixing Man Hole cover with frame & stair case of M.S. sheet and angle size 450x450mm(weight of Main-Hole & stair case arenot less 35kg & 75 kg). Including welding and cutting charges as per direction of Engineer in Charge.
Prov. and fixing GMS tubes of following dia in walls, floors etc. including tube fittings and making the wall, floors etc. good. i.e welding with one feets 25mm flat iran both side of pipes subject to site condition and as per direction of Engineer In Charge
25mm to 32mm
P/F Controlling arrangement i:e wheel valve of size 25mm to 40mm of suitable make complete as per satisfaction / direction of Engieer in Charge.
Laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia (medium grade) including providing and fixing tube fittings such as reducer increasers, sockets, union,tees,bends etc. where ever required ( earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.
32mm dia
25mm dia
Harsh chauhan
desh raj
SHUBHAM SHANGAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .