SPECIAL REPAIRS TO BUILDING NO P 01 AT HARDING LINE, PROVISION OF MODULAR KITCHEN AND CONNECTED ITEMS IN BC 10 APPT HOUSE OF CDR, PC WING,CONSTRUCTION OF PARKING SHED OPPOSITE BLDG NO P 58 HARDING LINE, ARMY PRIMARY SCHOOL OF HQ JL WG,SPECIAL REPAIRS

Amount

Material and labour for Second class hard-wood in scantling clean sawn and fixed including dismantling timber scantlings 40 sq. cm and over in section, in any position for unframed work complete all as specified and as directed.

Description all as per item no :1 but except timber including dismantling timber scantlings 40 sq. cm and over in section, in any position for unframed work complete all as specified and as directed.

Material and labour for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with creosote oil complete all as specified and as directed.

Supply and fix Pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified including dismantling plain or corrugated transulant etc asbestos cement sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Plain galvanised mild steel sheeting 0.45 mm thick class 8, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete ncluding dismantling plain or corrugated transulant etc asbestos cement sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed.

Supply and fix Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B' complete all as specified and as directed.

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 including dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165. dismantling structural steel work complete all as specified and as directed.

Material and labour for Providing cement concrete type C1 1:3:6 ( using 20mm graded stone aggregate) in coping/bed plates eaves filling in roof including necessary form work complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6,complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound .Note :Make : Impemo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall case putty complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two oil bound distemper over a coat of primer and including preparation of old decorated surfaces of wall complete all as specified and as directed.

Material and labour for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including demolition of 75mm thick cement concrete in ground floors n exc 15cm thick unreinforced complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces in two layers 5mm top mixed with water proofing compound over 10mm thick rendering on external wall surfaces finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for PCC type B1 1:2:4 (using 20mm graded stone aggregate) as in surface channels/benching inside the manhole and drains complete all as specified and as directed.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 550 D 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed .

Description all as specified in item no : 19 here in before but 6 to 10 mm dia as in stiruups/spacers etc complete all as specified and as directed.

Material and labour for Precast reinforced cement concrete manhole cover in 1:2:4 type B-1,using 20mm graded stone aggregate, set and jointed in CM 1:6 including necessary steel form work/moulds etc complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete. all as specified and as directed..

M&L for cement concrete roofing tiles, rustic red colour, 420 x 330mm size, 230 kg minimum breaking strength, double groove design, as in roofing, interlocking at side joints, laid dry complete all as specified and directed by Engr-in-Charge. Make: ETERNA model of INDOGRACE or PIONNIER

Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings and removal of rubbish off the premises and old unserviceable sheet taken as credit complete. all as specified and as directed.

Supply and fix Plain galvanised mild steel sheeting 0.8 mm thick class 8, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Material and labour for Preparing newly plastered surface of wall and applying two coats of exterior emulsion paint (Make :Apex ultima - Asian paint) over a coat of water based primer complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of exterior acrylic emulsion paint (Asian Paint -APEX Brand) over a coat of primer with alkali resistant priming paint on wall complete all as specified and as directed

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board including dismantling old ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Material and labour for Vitrified Coloured Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6completeall as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixedwith pigment to match the shade of the slab including rubbingand polishing complete all as specified and as directed

Material and labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 15mm thick backing coat in CM 1:6 complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of area exc 1.5 Sqm and n exc 4 Sqm.each and taken as credit complete all as specified and as directed

Taking down chowkhat with shutters (without taking off shutters from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Material and labour for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed

Material and labour for Factory made 2nd class hard wood plain, framed, panelled door shutter 35mm thick , two panels with lock rail and panels of 12 mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I,Section 8.Clause 8.24(a) and fitted to Chowkats complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed. (ISI MARKED)

Supply and fix in repairs 150mm extruded Aluminum alloy handles, cast type, anodized complete all as specified and directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs 150 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed..Make :Classic/Crown/Adarsh

Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Blue Star/Commander

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10cm girth complete all as specified and as directed.

Supply and laying 15 mm of UPVC pipes of pressure rating 10 Kgf/cm2 fittings on walls/ceilings or laying in floors complete all as specified and as directed. Note Make :Ashirwad/Astral

Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs 75mm dia PVC (SWR) floor traps plain with grating including jointing with solvent cement complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fixing of 17 -18mm thick one side prelam/rigidlam and other side plain colour ply board fixed with screws, solvent cement/adhesive to make kitchen cabinet shutter/drawer, front/sides including 1mm thick PVC lipping/beading fixed with solvent over edges of ply of required width and colour complete all as specified and as directed. Make: Rajshri Celuka ply or equivalent

Supply and fixing of auto closing hinges openeable 0 to 15 degree for kitchen cabinet shutters complete all as specified and as directed.

Supply and fix stainless steel handles 150mm size for kitchen cabinet shutters complete all as specified and as directed

Supply and fix ball bearing runners 45mm telescopic channel (20 inch) full extension, load capacity 50 Kgs complete all as specified and directed

Supply and fix chrome plated stainless steel wire basket (Thali basket) pull out type for large utensils size 380x500x200mm with necessary fixing clips etc complete all as specified and as directed.

Supply and fix chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils size 536x500x150mm with necessary fixing clips etc complete all as specified and as directed.

Supply and fix chrome plated stainless steel wire basket(Plain trolley) pull out type for large utensils size 536x500x200mm with necessary fixing clips etc complete all as specified and as directed.

Supply and fix chrome plated stainless steel wire basket (cup and saucer basket)pull out type for large utensils size 536x500x100mm with necessary fixing clips etc complete all as specified and as directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in Hard/ dense soil complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Excavating in post holes each n exc 0.5 cum, getting out, in soft /loose soil and ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing surplus soil to distance nexc 50 m and making good the surface complete all as specified and as directed.

Supply and fix Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix 5 mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 complete all as specified and as directed.

Material and labour for PCC 1:3:6 ,type C2( using 20mm graded stone aggregate) 75mm thick as in sub base of floor as in level course complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 80mm thickness, with grey cement , M-40 grade complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 with water proofing compound over 10mm thick rendering in cement mortor 1:6 on fair faces of brick workor PCCblock masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. . Note : water proofing compound shall be measured and paid separately.

Material and labour for applying two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depot tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new surface complete all as specified and as directed.

Supply and fix Aluminium composit panel board 3mm thick for cladding/bush board with aluminium frame work of size 35mmx25mmx 2mm thick aluminium section with necesary fitting and scaffolding etc, including dismantling boarding of any description fixed in any position with nails etc complete all as specified and as directed.

Supply and fix Factory made 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat etc complete all as specified and as directed.

All as per item No 71 above but for window, ventilator etc privided with stiles and rails as specified in SSR part I, Section 8, clause 8.24 (b),fitted to chowkat etc complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and asdirected.

Supply and fix Stainless steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed .

Supply and fix in repairs Stainless steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed .

Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed. (ISI MARKED)

Supply and fix in 300mm long mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete fixed to wooden/ steel chowkats complete all as specified and as directed. (ISI MARKED)

Supply and fix 100mm extruded Aluminum alloy handles, cast type, anodized complete all as specified and directed.Make:Crown/Classic/Adarsh

Supply and fix 100 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beads in square m exc 0.5 Sqm in each pane including hacking out old broken glass panes any thickness ,size and quality from wooden frames and removal from site complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Material and labour for Machine pressed precast concrete interlocking colour paver block 55 - 60mm thick , M-35 grade ,any shape and size with glossy finish on top and grey cement confirming to IS 15658-2006 .complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1: 4 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of old unserviceable precast concrete masonry of any description and removal of debris off the premises complete all as specified and as directed

Material and labour for Preparing newly plastered surfaces of wall and applying two coats of cement based paint, complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block 55 - 60mm thick , M-35 grade ,any shape and size with glossy finish on top and grey cement confirming to IS 15658-2006 .complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1: 4 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed.

Takig down unserviceable point wiring including old conduit, switches, sockets,Fan regulators, Ceiling Roses switch boards and all connected accessories complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral drawn through in and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and provision of one run of green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular metal surface box fixing in wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controled by one 1 way switch .NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

All as described in item No. 89 here in before but for One Ceiling fan/Exhaust fan controlled by one switch and regulator.

All as described in item No. 89 here in before but for One 05 Amps socket outlet on independent board.

All as described in item No. 89 here in before but for One 05 Amps socket outlet on the same board with other switches.

All as described in item No. 89 but wiring with 2.5 Sqmm PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in Modular switch piano 16 Amps 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix PVC or Polycarbonate ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals. complete all as specified and as directed.Make : Anchor/Legrand/Havells

Supply and fix Modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and as directed. Make : Anchor (Roma)/Havells/Rider

"Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 4.00 Sq mm drawn through and including PVC conduit in ivory/Grey/White colour ,medium grade fixed on wall/ceiling with all necessary fitttings and Provn of one run of 4.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 4.0 sqmm and 01 run of 4.0 sqmm including 01 run of PVC conduitwill be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware"

Supply and fix in repairs industrial luminaries LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative polycarbonate T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Note :Make:Cat part no :-LUMILINENXTBS20WLED865SPCWH OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repairs industrial luminaries LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative polycarbonate extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make:Cat part no :-LUMILINENXTBS10WLED865SPCWH OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completecomplete all as specified and as directed. Make:Cat part no :-ENDURASUNDOWNSL25WLED765PASYBOPC OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, and connecting up light fitting with twin core twisted PVC flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent in CG/ Philips/ Wipro

Taking down existing unserviceable / serviceable ceiling fan / exhaust fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and directed

Supply and fix Ceiling fan complete with 03 Nos of blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) connected with 3 core size FRLS PVC flexible copper cable Pre wired from ceiling rose to connector complete all as specified and as directed. Make : Orient/CG/Bajaj

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep , 50 Hz , 1200 RPM ,copper winding with, blades, and frame and louvers , and including making suitable arrangement for fixing the exhaust fan,grouting , anchor fastener bolts etc and matching the surface with existing surface and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed. Make : CG/Bajaj/Khaitan

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum thickness CRCA sheet and fixed flush on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB/MCB 100/ 63 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoing including old unserviceable DB of any description and taken as credit complete all as specified and as directed. Note :Make : Indo Asian/Legrand/L&T

Supply and fix in replacement MCCB,4 pole,125 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed.Note :Make : Indo AsianHAVELLS/Legrand

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings including old.unserviceable DB of any description and taken as credit complete all as specified and as directed . Note :Make : Indo Asian/HAVELLS/L&T

Supply and fix In repairs 'C' series ' 40-63 Amps Double pole MCB complete all as specified and as directed.:Make :Siemen/Indo Asian/ABB/Havells

Supply and fix in repairs MCB SP 240 Volt of capacity 6 to32 Amps ‘C’ series, complete all as specified and as directed.:Make :Siemen/Indo AsainABB/Havells

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

M/s. VIJAY ELECTRICALS (BID ID -3137102)

M/s. N D KALING (BID ID -3137981)

M/S SAMARTH CONSTRUCTIONS (BID ID -3139550)

M/s.Y.N.PATIL (BID ID -3139333)

AARADHYA ENTERPRISES (BID ID -3137103)

SHREESAMARTH CONSTRUCTION (BID ID -3137790)

M/S VISHWAROOP ELECTRONICS AND ELECTRICALS (BID ID -3138426)

M/s. J P CONSTRUCTIONS (BID ID -3139052)