GE(W)/HSR-11/2021-22 PETTY REPAIR AND DAY TO DAY MAINTENANCE INCLUDING CLEANING OF OVERHEAD TANKS, UG SUMPS, RAW WATER RESERVOIRS AND MISC WORK OF EXTERNAL WATER SUPPLY AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Attending complaints of no water / leakage of water by removing float valve, water meter, stop cock etc or GI/composite tubing of size 15 mm to 20 mm bore upto 0.3 mtr length including all GI fittings like elbow, socket, Tee, Nipple, bend, union etc and making new threads as required at site including excavation,return refilling and removing soil & earth work etc. complete all as specified and directed.

All as per item no 1 but of size 25 mm bore

All as per item no 1 but of size 40 mm bore

All as per item no 1 but of size 50 mm bore

All as per item no 1 but of size 80 mm bore

All as per item no 1 but of size 100 mm bore

Attending leakage complaints of sluice valve 80 mm to 150 mm bore by opening /removing gland plate and taking out water from water pit , providing gland packings and refitting including replacing worn out bolts,nuts,washers as required complete all as specified and directed.

Attending leakage complaints of sluice valve 200 mm to 250 mm bore by opening /removing gland plate and taking out water from water pit , providing gland packings and refitting including replacing worn out bolts,nuts,washers as required complete all as specified and directed.

Attending leakage complaints of sluice valve 300 mm to 400 mm bore by opening /removing gland plate and taking out water from water pit , providing gland packings and refitting including replacing worn out bolts,nuts,washers as required complete all as specified and directed.

Attending leakage complaints of CI pipe lines 80 to 100 mm bore using lead wool and rope and cocking of joints in situ complete all as specified and directed.

All as per item No 10 but size of CI pipe lines 150 to 200 mm mm bore.

All as per item No 10 but size of CI pipe lines 250 to 400 mm bore. NOTE for Ser item No (01 to 12) : (i) Dewatering of accumulated water using engine driven pump set etc is deemed to be included in quoted rate. (ii) Excavation and earth work required shall be measured and paid seperately. (iii) Complaints of urgent nature will be attended round the clock including Sunday & holiday to restore the water supply (iv) Minimum one pipe fitters and two helpers should be made available during all week days. (v) Complaints given to contractor shall be rectified within 24 hrs (vi) Contractor will arrange all the T&P/Diesel pumps for dewatering where ever required. (vii) A penality of Rs 500/- per complaint will be charged for not attending the complaints within 48 hours

Taking up or down steel tubing and connections 15 mm bore including cleaning for relaying / re-fixing or removal from site complete all as specified and directed.

All as per item no 13 but of size 20 mm bore

All as per item no 13 but of size 25 mm bore

All as per item no 13 but of size 40 mm bore

All as per item no 13 but of size 50 mm bore

All as per item no 13 but of size 80 mm bore

All as per item no 13 but of size 100 mm bore

Supply and fixing Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, Tee, Socket, Union, flange and Socket laid in trenches/ on walls complete all as specified and directed.

All as per item no 20 but of size 20 mm bore

All as per item no 20 but of size 25 mm bore

All as per item no 20 but of size 40 mm bore

All as per item no 20 but of size 50 mm bore

All as per item no 20 but of size 80 mm bore

All as per item no 20 but of size 100 mm bore

Laying only Steel water tubes, any grade, galvanised, 15 mm bore with all new fittings, laid in trenches/on walls complete all as specified and directed.

All as per item no 27 but of size 20 mm bore

All as per item no 27 but of size 25 mm bore

All as per item no 27 but of size 40 mm bore

All as per item no 27 but of size 50 mm bore

All as per item no 27 but of size 80 mm bore

All as per item no 27 but of size 100 mm bore

Taking up cast iron water mains (including all fittings) 80mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

All as per item no 34 but of size 100 mm bore

All as per item no 34 but of size 150 mm bore

All as per item no 34 but of size 200 mm bore

All as per item no 34 but of size 250 mm bore

All as per item no 34 but of size 300 mm bore

All as per item no 34 but of size 400 mm bore

Supply and fixing Cast iron pipes 80mm bore with spigot and socket ends, centrifugally cast, class LA, in any length, laid in trenches complete all as specified and directed.

All as per item no 41 but of size 100 mm bore

All as per item no 41 but of size 150 mm bore

All as per item no 41 but of size 200 mm bore

All as per item no 41 but of size 250 mm bore

All as per item no 41 but of size 300 mm bore

All as per item no 41 but of size 400 mm bore

Laying only in trenches old cast iron pipes with spigot and socket ends centrifugally cast in any length, 80mm bore complete all as specified and directed.

All as per item no 48 but of size 100 mm bore

All as per item no 48 but of size 150 mm bore

All as per item no 48 but of size 200 mm bore

All as per item no 48 but of size 250 mm bore

All as per item no 48 but of size 300 mm bore

All as per item no 48 but of size 400 mm bore

Cutting of 80 mm bore existing CI Pipe for taking up of damaged / leakage portion or for insertion of branch T etc complete all as specified and directed. (Both cut shall be measured as one Job)

All as per item no 55 but of size 100 mm bore

All as per item no 55 but of size 150 mm bore

All as per item no 55 but of size 200 mm bore

All as per item no 55 but of size 250 mm bore

All as per item no 55 but of size 300 mm bore

M&L for Cast iron fittings viz bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot) collars, caps and plugs for spigot socketed pipes upto 150mm bore complete all as specified and directed.

M&L for Cast iron fittings viz bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot) collars, caps and plugs for spigot socketed pipes 200 mm to 300mm bore complete all as specified and directed.

Burning out lead joint in position for 80 mm bore pipes and fittings complete all as specified and directed. Note for Ser item No 63 to 68 :- New lead joint will be paid separately under relevant item here-in-after.

All as per item no 63 but of size 100 mm bore

All as per item no 63 but of size 150 mm bore

All as per item no 63 but of size 200 mm bore

All as per item no 63 but of size 250 mm bore

All as per item no 63 but of size 300 mm bore

M & L for Run lead joint for cast iron spigot and socket pipes and fitting of 80mm bore complete all as specified and directed.

All as per item no 69 but of size 100 mm bore

All as per item no 69 but of size 150 mm bore

All as per item no 69 but of size 200 mm bore

All as per item no 69 but of size 250 mm bore

All as per item no 69 but of size 300 mm bore

Supply and fix (in repair) Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore fixed in repair/replacement complete all as specified and directed.

All as per item no 75 but of size 20 mm bore

All as per item no 75 but of size 25 mm bore

All as per item no 75 but of size 40 mm bore

All as per item no 75 but of size 50 mm bore

Repair to non return valve 80mm bore by opening nuts, bolts and washer and replacing flap/gasket with new flap/gasket, refixing the nuts, bolts and washer etc complete all as specified and directed.(Nuts, bolts and washers if required shall be measured and paid separately as supply only).

All as per item No 80 but 100 mm bore complete.

All as per item No 80 but 150 mm bore complete.

Supply only flange, nuts, bolts,washers (machine made) of any size suitable for sluice valve/non return valve/CI/GI flanged pipe off sizes as required at site complete all as specified and directed.

M&L for flanged joint with rubber or fibre board gasket of CI pipe, sluice valve, non return valve etc of 80mm bore fixed in repair/replacement complete. ( Flange and nut,bolts and wsaher will be measured and paid seperately)

All as per item No 84 but of 100mm bore complete.

All as per item No 84 but of 150mm bore complete.

All as per item No 84 but of 200mm bore complete.

All as per item No 84 but of 250mm bore complete.

All as per item No 84 but of 300mm bore complete.

Supply and fixing Sluice valves class P N 1.6 cast iron body with forged steel spindle, non rising type, with cast iron wheel head, both end flanged, ISI marked, 300 mm bore including neoprene rubber gasket, nuts, bolts, washers, etc fixed in repairs/replacement complete all as specified and directed.

All as per Ser item No 90 here-in-beofe but 250 bore complete.

All as per Ser item No 90 here-in-beofe but 200 bore complete.

All as per Ser item No 90 here-in-beofe but 150 bore complete.

All as per Ser item No 90 here-in-beofe but 100 bore complete.

All as per Ser item No 90 here-in-beofe but 80 bore complete all as specified and directed.

S&F Non-return valves cast iron body, ISI marked, heavy duty both ends flanged suitable for 80 mm bore pipe fixed in repairs/replacement complete all as specified and directed.

All as per item No. 96 here-in-before but of size 100 mm complete

All as per item No. 96 here-in-before but of size 150 mm complete

MS spindle with check nut of sluice valve 80 mm bore as per existing pattern, fixed in repairs/replacement including nuts, bolts & washers complete all as specified and directed.

All as per item No 99 but for sluice valve 100 mm bore

All as per item No 99 but for sluice valve 150 mm bore

All as per item No 99 but for sluice valve 200mm bore

All as per item No 99 but for sluice valve 250mm bore

All as per item No 99 but for sluice valve 300mm bore

Excavating in trenches, not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5mt in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete.

Excavating in trenches, not exceeding 1.5mtr wide and not exceeding 1.5mt in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5mtr in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense soil complete.

Excavating in trenches, not exceeding 1.5mrt wide and not exceeding 1.5mt in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5mt in depth for shafts, cesspits, manholes, pier holes, etc and getting out in mud complete.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50mt and depositing where directed at a level not exceeding 1.5mt above the starting point complete all as specified and directed.

S&F in replacement of sluice valve operating rod ( inside clear water tank/filtration plant etc). made of GI pipe heavy duty 20 mm bore, 4 mtr long duly fixed on sluice valve at one end with nut, bolts etc, with wheel at other end complete all as specified and directed.

S&F MS clamp of any size including drilling holes complete all as specified and directed.

Bacteriological & chemical testing of raw and clean water from the authorised laboratory of state Govt complete with collecting sample in sterlized bottle to laboratory including testing report complete all as specified and directed by Engr-in-charge.

S & F CI/MS Detachable Joint suitable for 100mm bore Cast iron and DI pipe with metallic ring ,rubber gasket, nuts, bolts and washer etc of following size complete all as specified and directed.

All as per item no 111 but of size 150 mm bore

All as per item no 111 but of size 200 mm bore

All as per item no 111 but of size 250 mm bore

All as per item no 113 but of size 300 mm bore

Dismantling/Demolition of brickwork or stone/boulder masonry,built in lime mortar including all quoins,arches,pillars,etc., but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass'B' bricks, straight or curved on plan exc 6m mean radius,built in cement morter 1:4 complete all as specified and directed.

M&L for providing cement concrete type 'B1' 1:2:4(20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5 m clear span,cills,steps,seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height , coppings,kneelers,apex stones, bed plates, kerbs not provided for in item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using water proofing compound finished even and fair without using extra cement complete all as specified and directed.

Cleaning of raw water tank No. of size 207 X 62 X 6.7 Mtrs deep by taking out sludge i.e mud, silt and sand including weeds (the depth of mud silt mixed approx 30 cm) and disposal of retrieved material to distance exceeding 50 mtr but not exc 100 mt from the outer edge of the tanks spread and leveled as directed by Engineer-in-charge, cleaning the floor of the tank and slanted surfaces up to the depth of silt by removing vegetation growth and any foreign substances and sweeping, by wire brushing and gunny bags including repair of float & floating arms & connected works by replacing the unserviceable MS float as per existing and making the float valve serviceable in all respect, painting the floating arms with black bituminous paint including cutting &removal of grass, bushes, weeds upto a distance of 5mtr frm the outer edge around the tank (Tank No 3) Note for item 122, 123 & 124:- (i) It will be responsibility of the contractor to take out the water by Diesel pumps or by any other means The entire job should be completed with in 20 days from the date of handing over of site in cluding Repais to walls & floors of tank(items of repair work will be measured & paid Seprately). ii) During removal of the trees/bushes etc the holes made during uprooting shall be made good to the existing specifications to the entire satisfaction of the Engr-in-Charge

All as per Ser item No 122 here-in-before but raw water tank No 4 of size 207 X 114 X 6.7 Mtrs complete.

All as per Ser item No 122 here-in-before but raw water tank Nos 1 & 2 of size 116 X 110 X 6.7 Mtrs complete.

Cleaning of drainage water reservoir of size 150 x 60 x 6.7 Mtrs deep by removing sarkanda, long wild grass completely before taking out sludge i.e mud, silt and sand including weeds (the depth of mud silt mixed approx 30 cm) and disposal of retrieved material to distance exceeding 50 mtr but not exc 100 mt from the outer edge of the tanks spread and leveled as directed by Engineer-in-charge, cleaning the floor of the tank and slanted surfaces up to the depth of silt by removing vegetation growth and any foreign substances and sweeping, by wire brushing and gunny bags complete including cutting &removal of grass, bushes, weeds upto a distance of 5mtr from the outer edge around the tank . Tank No 1 & 2 Near Filteration plant.

Cleaning of clarifloculator (internally) size 17 mt dia and 3.5 mt deep internally having double chamber; by scraping of wall and bottom and channel with wire brush and jute bags, removing silt, sludge, any type of depositing and disposal of retrieved material to distance exceeding 50 mtr but not exc 100 mtr from the outer edge of the tank spread and leveled and two coat of white wshing on undecorated surface after washing rubbing down and stopping of existing whitewash complete.all as specified and directed.

Cleaning of sludge water tank (internally of size 38mt x 23 mt at top 32mt x 18 mt at bottom and 5mt deep) by taking out sludge mixed with water in the shape of mud silt, sand, and weeds cleaning bed & walls incl disposal of retrieved material to a distance exc 50 mt but n exc 100mt from outer edge of tank, spreading leveling complete. (filtration plant-1)

All as per Ser item No 127 here-in-before but size of tank 6 mtr deep having 4.5mtr dia (filtration plant 3 & 4)

Cleaning of raw water UG sump of size 6 mtr deep having 6 mtr dia by taking out sludge mixed with water in the shape of mud silt, sand, and weeds cleaning bed & walls incl disposal of retrieved material to a distance exc 50 mt but n exc 100mt from outer edge of tank, spreading leveling complete. (suction well of filtration plant 2 & 3)

M&L internal cleaning of dome of RCC overhead tanks of any type of capacity of 2 lakh gallon and at 60/70 ft staging by scraping, brushing the internal surface of wall and bottom floor, cleaning, removing the complete accumulated silt sludge ( incl removing and depositing where directed not exc 50 mt away from O/H tanks) and washing internal surface of tank incl bottom with water, applying one coat of lime wash(internally) and two coats of cement paint on external surface of approved colour including Painting of Stair case & all incoming & outgoing CI pipes of any dia with two coats of synthetic enamel paint of approved colour complete incl painting of wall with blue paint of size 60x60 cm and writing the letters with white paint height of the each letter not less than 50mm incl writing the following information (a) Capacity (b) Location (c) Date of cleaning (d) date of next cleaning and writing slogan as on dome of tank height of words 250mm:- (i) water is precious.

All as per Ser item No 130 but over head Tank 50000 gallons capacity

All as per Ser item No 130 but over head Tank 01 lakh gallons capacity.

All as per Ser item No 130 but over head Tank 25000 gallons capacity.

Cleaning of underground sump of capacity 2.0 lakhs Gallons by taking out silt, mud and vegetables growth including residual water and disposal of the same to a distance 50 mtr, scrapping of internal surface of walls, floor with wire brush, broom, jute, applying one coat of lime wash, painting of cast iron pipe with one coat of synthetic enamel paint and area complete all as specified and directed.

All as per Ser item No 134 here-in-before but capacity 100000 Gallons complete all as specified and directed.

All as per Ser item No 134 here-in-before but capacity 50000 Gallons complete all as specified and directed.

All as per Ser item No 134 here-in-before but size of sump 3.7mt dia, 4mt deep complete all as specified and directed..

Cutting and site clearance of bushes, wild grass growth, Sarkanda etc and removing rubbish by means of manpower or JCB machine and removing the waste to a distance not exceeding 50 Mtr and depositing where directed by Engineer-in-Charge

Cutting of 400 mm bore existing CI Pipe for taking up of damaged / leakage portion or for insertion of branch T etc complete all as specified and directed. (Both cut shall be measured as one Job)

SULTAN SINGH, CONTRACTOR

virendra constructions