Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-Finance | ₹27.8 L | L1 | Accepted-Finance L1 |
| 2 | L2₹27.8 LRejected-Finance | ₹27.8 L | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | GTRandco L1 | Jayaprakash D L2 |
|---|---|---|---|---|---|
| 1.00Strengthening the Road from Mutthukadu to Natesen kadu KM 0/0-0/530 (R 60) | |||||
| 2.00 | Clearing light jungles including and removing from site, disposal by burying or burning etc., complete as directed by the departmental officers. | 381.6 | Sqm | 6 ₹2,289.60 | 6 ₹2,289.60 |
| 3.00 | Picking 5 cm to 10 cm old metalled surface and sectioning including all labourcharges.etc. complete. | 532.67 | Sqm | 23 ₹12,251.41 | 23.36 ₹12,443.17 |
| 4.00 | Construction of Granular Sub base GIII by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 401 of MORD revision I(Mix -in - place method) . | 239.7 | Cum | 2,518.43 ₹6.0 L | 2,518.43 ₹6.0 L |
| 5.00 | Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) 250 mm thick, including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory Soil Compactor to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as pwe clause 406 of MORTH Rev-5 | 239.7 | Cum | 2,584.67 ₹6.2 L | 2,584.67 ₹6.2 L |
| 6.00 | Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it. | 1,598 | Sqm | 87.54 ₹1.4 L | 87.54 ₹1.4 L |
| 7.00 | Applying tack coat over primed WMM surface at 2.5Kg of bituminous emulsion per 10 Sqm. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification. | 1,598 | Sqm | 20.61 ₹32,934.78 | 20.61 ₹32,934.78 |
| 8.00 | Providing and laying Bituminous Concrete to 25/30/40mm thick using 0.13 cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 | 71.15 | Sqm | 11,514.86 ₹8.2 L | 11,514.86 ₹8.2 L |
| 9.00 | Providing Granular Bedding with Gravel collected from an average lead of 1 Km inlcuding labour charges for filling etc. complete. | 95.4 | Cum | 341.29 ₹32,559.07 | 341.29 ₹32,559.07 |
| 10.00 | Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surfaceto be level, uniform, free from streaks holes ets complete as per MoRTH specification no 803. | 106 | Sqm | 890 ₹94,340 | 890 ₹94,340 |
Tender Value
₹28.1 L
EMD Value
₹28,100
Closing Date
21 Feb 2026, 9:00 amClosed
BDO BP
BDO Office Vennandur
Strengthening the Road from Mutthukadu to Natesen kadu KM 0/0-0/530 (R 60) H/o Kattanachampatti
2026_RDTN_658229_1
3150/2025/A2
Open Tender
Civil Works - Roads
120 days
Vennandur
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹28,100
Yes
29 May 2026
16 Feb 2026
21 Feb 2026
16 Feb 2026
21 Feb 2026
16 Feb 2026
Strengthening the Road from Mutthukadu to Natesen kadu KM 0/0-0/530 (R 60)
Clearing light jungles including and removing from site, disposal by burying or burning etc., complete as directed by the departmental officers.
Picking 5 cm to 10 cm old metalled surface and sectioning including all labourcharges.etc. complete.
Construction of Granular Sub base GIII by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 401 of MORD revision I(Mix -in - place method) .
Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) 250 mm thick, including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory Soil Compactor to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as pwe clause 406 of MORTH Rev-5
Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it.
Applying tack coat over primed WMM surface at 2.5Kg of bituminous emulsion per 10 Sqm. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification.
Providing and laying Bituminous Concrete to 25/30/40mm thick using 0.13 cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5
Providing Granular Bedding with Gravel collected from an average lead of 1 Km inlcuding labour charges for filling etc. complete.
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surfaceto be level, uniform, free from streaks holes ets complete as per MoRTH specification no 803.
Hm stones
GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_789635.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Kattanachampatttechnicalbid.pdf
Tender Documents • 1.36 MB
BOQ_789635.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid