REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING COOLING HEATING APPLIANCES AND EXTERNAL WATER SUPPLY PIPELINE AND FIRE FIGHTING PUMP SETS AND OTHER MISC WORKS AT NMRL AMBERNATH

Amount

Material and labour for rewinding of ceiling fan,1200 mm sweep of any make and any type/ model, after taking down burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and including providing 2 Nos new bearings both complete all as specified and directed

Material and labour for rewinding of ceiling fan,1400 mm sweep of any make and any type/ model, after taking down burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and including providing 2 Nos new bearings both complete all as specified and directed

Material and labour for rewinding of Exhaust fan/Wall fan 450 mm sweep of any make and any type / model, after taking down burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and including providing new bearing/bush complete all as specified and directed

Material and labour for rewinding of Exhaust fan up to 300 mm sweep of any make and any type/ model, after taking down burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and including providing new bearing/bush complete all as specified and directed

Material and labour for rewinding of Exhaust fan 230 mm sweep / Pedestal fan/Wall fan of any make, type and model, after taking down burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and including providing new bearing/bush complete all as specified and directed.

Material and labour for painting of fan (ceiling fan / exhaust fan/wall mounted fan ) of any sweep with one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine including preparation of old painted surfaces, filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20 mm on fan body in approved pattern complete all as specified and directed.

Supply and Fix in repair louver shutter (with Mosquito net made out of Aluminium wire cloth 0.36 mm nominal dia ) made out of GI sheet (Thickness of louver shutter Body 1mm ,shutter Fins 0.5 mm fixed with 3 mm GI wire ) for Exhaust fan 250 mm to 450 mm mm sweep including proper fixing with screw in wall at existing Hole complete all as specified and directed.

Supply and fix in repair Capacitor 2.5 MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep complete all as specified and directed.

Supply and fix in repair Capacitor 1.2 MFD for Exhaust/Pedestal fan/Wall fan of any make, any model and any sweep complete all as specified and directed.

Supply and fix in repair Capacitor 4.0 MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep complete all as specified and directed.

Supply and fix in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair Factory made sheet metal enclosure for DBs Single door (Fixed flush to the wall), SPN, 240 volt, 2 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair TP&N Vertical double door Loadline DBs, 4 Way are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB), concealed in wall, suitable for TP/FP ‘G FRAME’ MCCB - 250A complete all as specified and directed. Cat Ref: DHDLVDRWGOFO04 Make- Havells or techno commerical equivalent in L&T/C&S/legrand/hager.

Supply and fix in repair TP&N Vertical double door Loadline DBs, 8 Way are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB), concealed in wall, suitable for TP/FP ‘G FRAME’ MCCB - 250A complete all as specified and directed. Cat Ref: DHDLVDRWGOFO08 Make- Havells or techno commercial equivalent in L&T/C&S/legrand/hager.

Supply and fix in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge.

Supply and fix in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed by Engineer-in-charge.

Supply and fix Factory in repair made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCCB 3 Pole, 415 V, fixed type, 25Amps to 100 Amps with breaking capacity 16 KA complete all as specified and directed.

Supply and fixing in repair MCCB 3 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA complete all as specified and directed.

Supply and fixing in repair MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

Supply and fixing in repair MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutral and current carrying capacity 40 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutral and current carrying capacity 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of Triple pole and Neutral and current carrying capacity 32 Amp;s in the DB complete withconnection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of Triple pole and current carrying capacity 25Amps to 63 Amps in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of Triple pole and Neutral and current carrying capacity 40 Amps to 100 Amps in the DB complete withconnection testing and commissioning complete all as specified and directed.

Material and labour in repair for point wiring complete for One light point with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through PVC casing caping including provn of 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed as earth wire continuity including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed. Note -Modular metal flush box and Modular white Cover Plate with Frame shall deemed to be included in quoted rate

All as per Ser item 32 here in before but for one fan point

All as per Ser item 32 herein before but for One 3 pin 5 Amp socket outlet on the same board

All as per Ser item 32 herein before but for One 3 pin 5 Amps socket out let on independent board

All as per Ser item 32 herein before but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

All as per Ser item 32 here in before but with cables 2x 4.0 Sqmm +1 x 4.0 sqmm Copper conductor cable as earth wire for one 3 pin, 15 Amps Switch socket out let on independent board complete all as specified and directed.

All as per Ser item 32 here in before but for one bell point controlled by one 5 amp switch

All as per Ser item 32 here in before but for one light point controlled by two two way switches

Supply and fix in repair electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified and directed.

Supply and fix in repair switch piano type, 5 Amp. SP, one way complete all as specified and directed.

Supply and fix in repair switch piano type, 15 Amp. SP, one way complete all as specified and directed.

Supply and fix in repair switch socket outlet, 2 in one 5 pin, 5 Amp, piano type complete all as specified and directed.

Supply and fix in repair switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal complete all as specified and directed.

Supply and fix in repair switch bell push, flush type, 5 Ampcomplete all as specified and directed.

Supply and fix in repair bell, AC, 230 V, SP, ding dong type complete all as specified and directed.

Supply and fix in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed.

Supply and fix in repair switch two way switch flush type, 5 Amp complete all as specified and directed.

Material and labour in repair for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and existing non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, surface/concealed with provn of modular metal flush box and Modular white Cover Plate with Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed. Note -Modular metal flush box and Modular white Cover Plate with Frame shall deemed to be included in quoted rate

All as per Ser item 49 here in before but for one fan point

All as per Ser item 49 here in before but for One 3 pin 5 Amp socket outlet on the same board

All as per Ser item 49 here in before but for One 3 pin 5 Amps socket out let on independent board

All as per Ser item 49 here in before but with 2 x 2.5 Sqmm +1 x 2.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

All as per Ser item 49 here in before but with 2 x 4.0 Sqmm +1 x 4.0sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

All as per Ser item 49 here in before but for one bell point controlled by one, one 5 amp switch

Supply and fix Surface mounting modular plastic box of 1/2 module of size 90mm x 90 mm complete all as specified and directed.

Supply and fix Surface mounting modular plastic box of 3 module of size 120mm x 90 mm complete all as specified and directed.

Supply and fix Surface mounting modular plastic box of 4 module of size 150mm x 90 mm complete all as specified and directed.

Supply and fix Surface mounting modular plastic box of 6 module of size 224mm x 90 mm complete all as specified and directed.

Supply and fix Surface mounting modular plastic box of 8 module of size 150mm x 150 mm complete all as specified and directed.

Supply and fix Surface mounting modular plastic box of 12 module of size 224mm x 150 mm complete all as specified and directed.

Supply and fix Surface mounting modular plastic box of 18 module of size 224mm x 224 mm complete all as specified and directed.

Supply and fix modular white cover plate with frame of module 1 flush ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame of module 2 flush ISI marked complete all as specified and directed.

Supply and fix modular in repair white cover plate with frame of module 3 flush ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame of module 4 flush ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame of module 6 ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame 8 module ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame 12 module ISI marked complete all as specified and directed.

Supply and fix modular white cover plate with frame 18 module ISI marked complete all as specified and directed.

Supply and fix modular blank plate module 1 complete all as specified and directed.

Supply and fix modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed.

Supply and fix in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed.

Supply and fix in repair modular switch, 16 Amp flush type 1 module complete all as specified and directed.

Supply and fix in repair modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and directed.

Supply and fix in repair modular bell push, flush type, 5 Amp,1 module complete all as specified and directed.

Supply and fix in repair modular Fan Regulator step type 2 module ,120W complete all as specified and directed.

Material and labour in repair for submain wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) including takingdown old unsv Submain wiring, complete all as specified and directed. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

All as per ser item No 78 here in before but 2x6.0 sqmm+1x6.0sqmm earth wire

All as per ser item No 78 here in before but 2x10.0 sqmm+1x10.0sqmm earth wire

All as per ser item No 78 here in before but 2x16.0 sqmm+1x16.0sqmm earth wire

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including takingdown existing old vintage unseviceable fan complete all as specified and directed.

Supply and fixing in repair Metallic Exhaust fan of sweep 225 mm including taking down existing old vintage, unseviceable fan all as specified and directed.

Supply and fix in repair Heavy duty exhaust fan, steel body AC single Phase. 230V, IP 55, ISI marked of size 300 mm sweep with, blades, and frame and louvers including taking down existing old vintage unseviceable fan complete all as specified and directed.

Supply and fix in repair Heavy duty exhaust fan, steel body AC single Phase. 230V of size 380 mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix in repair Heavy duty exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Supply and fix in repair Pedestal fan 600 mm sweep complete all as specified and directed.

Supply and fix in repair Wall mounting fan 450 mm sweepcomplete all as specified and directed.

Supply and Fixing in repair Basic all purpose surface and wall mounted LED batten 10 Watt with Aluminum housing & integrated electronic driver Fixture size: (LxWxH) in (592x23x37) mm (for 10W), indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed.

Supply and Fixing in repair Basic all purpose surface and wall mounted LED batten 20 Watt with Aluminum housing & integrated electronic driver Fixture size: (LxWxH) in (1182x23x37) mm (for 20W), indoor decorative with 2 Core copper wire from ceiling rose to light fittingcomplete all as specified and directed.

Supply and fixing in repair New generation, post-top 15 Watt, IP-65, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source with 3 Core copper wire Suitable for pole dia Ø 50 mm for 15 Watt complete all as specified and directed. Item description:RUBYMINIPT15WLED757PSYMTOPC of Make: :Havells or techno commercial equivalent in Crompton/ Bajaj/ Phillips/ Jaquar

Supply and fix in repair 24 Watt Slim, compact, auminum die cast edge lit panel. Recess/Surface mounted square fixture with opal diffuser and separate electronic driver, Lamp type: 24 W LED 6500 K complete all as specified and directed. Ordering code LHEBHEP7IZ1W024 of Make -Havells or techno commercial equivalent in Phillips/Bajaj/Crompton

Supply and fix in repair 18 Watt Slim, compact, auminum die cast edge lit panel. Recess mounted square fixture with opal diffuser and separate electronic driver, Lamp type: 18 W LED 6500 K complete all as specified and directed. Ordering code LHEBHEP7IZ1W018 of Make-Havells or techno commercial equivalent in Phillips/Bajaj/Crompton

Supply and fix in repair 18 Watt Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver, Lamp type: 18 W LED 6500 K complete all as specified and directed. Ordering code LHEBHDP7IZ1W018 of Make-Havells or techno commercial equivalent in Phillips/Bajaj/Crompton

Supply and fix in repair Heating element of 1500/2000 watts triangle/round suitable for 25/50 litre capacity water heater complete all as specified and directed.

Supply and fix in repair Capillary Thermostat for geyser suitable to 25litre /50 litre complete all as specified and directed.

Supply and fix in repair Water heater indicating lamp anti corrosive, waterproof suitable for 25litre /50 litre complete all as specified and directed.

Supply and fix in repair Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed. Item Description: LUTONEO2X2PLR42WLED857S of Make: Havells or techno commercial equivalent

Supply and fix in repair PVC angular holder polycarbonate complete all as specified and directed.

Supply and fix in repair Stainless Steel inter connection pipe with metal sockets at both end in std length 450 mm complete all as specified and directed.

Supply and fix in repair Vertical electric water heater, storage type with heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete with fixing accessories complete all as specified and directed.

Supply and fix in repair Vertical electric water heater, storage type steel body with heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete with fixing accessories complete all as specified and directed. Make: Havells/bajaj or techno commercial equivalent

Material and labour in repairs for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground earth pit not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med gde, wire mesh, protection pipe 20 mm dia GI pipe light grade for earth lead upto 7.50 m long salt charcoal complete all as specified and directed by Engineer-in-Charge. Note : (i) Epoxy base insulator and PCC block only will be measured and paid separately. (ii) Unit rate quoted is deemed to be inclusive cost of one lead joint and 2 Nos GI nuts, bolts washers, screws and necessary T&P and machining work reuired at site.

Material and labour in repair earthing with copper earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground earth pit not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised strip 20mm x 3mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med gde, wire mesh, protection pipe 40mm dia GI pipe light gde for earth lead upto 7.50 metre long salt charcoal complete all as specified and directed by Engineer-in-Charge. Note : Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG / user. Test results are to be written in letters of 20mm height in white colour on black paint back ground.

Supply and fix in repair Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs complete all as specified and directed.

Supply and fix in repair New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK08 complete all as specified and directed.

Material and labur in repair Aluminium strip 25mm x 3.15mm with saddles and fixing screws etc. complete all as specified and directed. Note: (i) Epoxy base insulator and PCC block only will be measured and paid separately under relevant items of schedule. (ii) Unit rate quoted shall deemed to be inclusive cost of one lead joint and 2 Nos GI nuts, bolts washers, screws and necessary T&P and machining work reuired at site.

Material and labour in repair for Copper strip 20mm x 3.15mm with saddles and fixing screws etc. complete all as specified and as directed. Note: (i) Epoxy base insulator and PCC block only will be measured and paid separately under relevant items of schedule. (ii) Unit rate quoted shall deemed to be inclusive cost of one lead joint and 2 Nos GI nuts, bolts washers, screws and necessary T&P and machining work reuired at site.

Supply only of epoxy base insulator of suitable size, 35mm height fixed on and including PCC blocks/ wall or MS angle/ Pipe or on traverse etc. complete all as specified and directed.

Material and labour for MS powder coated junction box of size 200mm x 170mm x 120mm made out of 3 mm thick MS sheet with hinged front opening cover including provision of fixing 2 Nos epoxy insulators and insulating PVC sheathed for incoming and outgoing aluminium / GI strips for proper insulation etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into PVC conduit/ERW steel conduit concealed into wall or on wall surface with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC FRLS insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete all as specified and directed for the following :- (switches & sockets shall be measured and paid for seperately) (a) one light /fan point controlled by one; one way switch.

Supply and fix Flame proof weather proof bend 3/4" (20 mm dia bore ) complete all as specified and directed.

Supply and fix Flame proof weather proof bend 1" (25 mm dia bore ) complete all as specified and directed.

Supply and fix Flame proof weather proof inspection elbow 3/4" complete all as specified and directed.

Supply and fix Flame proof weather proof inspection elbow 1" complete all as specified and directed.

Supply and fix FLP junction boxes LM-6 with plain cover suitable for 3 Way suitable for 20 mm to 25 mm dia conduit complete all as specified and directed.

Supply and fixing FLP junction boxes LM-6 with plain cover suitable for 4 Way suitable for 20 mm to 25 mm dia conduit complete all as specified and directed.

Supply and fixing in repairs Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Material and labour flameproof switch socket combination suitable for 2P+E 16 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked all complete all as specified and directed.

Material and labour flameproof switch socket combination 2P+E suitable for 25 Amps to 32 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed.

Material and labour flameproof switch socket combination suitable for 3P+E 16 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked all as complete all as specified and directed.

Material and labour flameproof switch socket combination suitable for 4P+E 32 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked all as complete all as specified and directed.

Material and labour flameproof switch socket combination suitable for 3P+E 32 Amps, TPN, 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed.

Material and labour flameproof switch socket combination suitable for 4P+E 63 Amps, TPN, 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed.

Supply and fix in repairs FLP flexible metalic hose conduit 20 mm dia 300 mm long complete all as specified and directed.

Material and labour in repair for Flame proof Sub main wiring 4 X 6 sq mm + 2 X 6 sq mm earth wire. with single core, multistranded FP FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn in and including steel rigid conduit , conduit fittings and accessories on surface wall/roof/floor with one run of suitable size FP FRLS PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring complete all as specified and directed for following size: NOTE :- 4 runs of main wire alongwith 2 run of earth wire and one run of steel conduit pipe shall be measured as one unit

Supply and fix in repairs Supply and fixing LED tube light fitting 1x16/18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc.comprising of one No 20 Watt LED tube rod Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Note : Flexible conduit / junction box will be measured and paid seperately.

Supply and fix in repairs Supply and fixing LED tube light fitting 2x16/18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc.comprising of two Nos 20 Watt LED tube rod Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Note : Flexible conduit / junction box will be measured and paid seperately.

Supply and fix in repair Flameproof Weatherproof LED Well Glass Light Fitting 45 Watt with lumen out put not less than 4400 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistar including necessary fixing arrangments and connecting up and complete all as Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass complete all as specified and directed.

Supply and fix in repair Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 60 Watt with lumen out put not less than 6000 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistar including suitable electronic including necessary fixing arrangments and connecting up completely all as Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass complete all as specified and directed.

Supply and fix in repair Flameproof-weatherproof Ceiling fans single phase in cast aluminium LM6 body for IIA & IIB of size 1200 mm sweep complete all as specified and directed.

Supply and fix in repair Flameproof Exhaust fans single phase in cast aluminium LM6 body for IIA & IIB of size 305 mm sweep complete all as specified and directed.

Supply and fix in repair Flameproof Exhaust fans single phase in cast aluminium LM6 body for IIA & IIB of size 380 mm sweep complete all as specified and directed.

Supply and fix in repair Flameproof Exhaust fans single phase in cast aluminium LM6 body for IIA & IIB of size 457 mm sweep complete all as specified and directed.

Supply and fix in repair Flameproof Wall mounting fans single phase in cast aluminium LM6 body for IIA & IIB of size 457 mm sweep complete all as specified and directed.

Supply and fix heavy duty steel & rubber, fan to hook attachment clamp with special fan rod nut bolt & locking pins complete all as specified and directed

Supply and fix in repair Geyser thermostat size 11" complete all as specified and directed.

Material and labour for taking out unserviceable air conditioner Split type in cappacity 1.5 Ton and 2 Ton for replacing unserviceable spares /servicing/ carrying out neccessary repairing works/ shifting location/ gas re-filling etc in any type/ cap/ make /model all as per site requirement with connecting accessories from existing location after removing all connections safely and transportation from site to work shop and back (if required) for the same after repairing work complete all as specified and directed. Note :- Connecting accessories will be taken in safy custody by contractor for re-using at same. (ii) All spares required to replace unserviceable shall be measured and paid against respective items of schedule.

Supply only under mentioned spares suitable for air conditioner in window / split type of cap 1.5 to 2 Ton as required complete all as directed. (a) Hermatic/ reciprocating / rotary DC compressor unit for Split type AC capacity 1.0/1.5 Ton.

All as per item No 141 above but Hermatic/ reciprocating / rotary DC compressor unit for Split type AC capacity 2.0 Ton.

All as per item No 141 above but capacitor (45+5 mfd) all as specified and directed

All as per item No 141 above but indoor unit blower motor for split type Air Conditioner capacity 1.5 Ton.

All as per item No 141 above but indoor unit blower motor for split type Air Conditioner capacity 2.0 Ton.

All as per item No 141 above but out door unit blower motor for split type Air Conditioner capacity 1.5 Ton

All as per item No 141 above but outdoor unit blower motor for split type Air Conditioner cap 2.0 Ton

All as per item No 141 above but PCB of outdoor for split type AC capacity 1.5 Ton.

All as per item No 141 above but PCB of outdoor for split type AC capacity 2.0 Ton.

All as per item No 141 above but PCB of indoor for split type AC cap 1.5 Ton.

All as per item No 141 above but PCB of indoor for split type AC cap 2.0 Ton.

All as per item No 141 above but DC Swing motor suitable for 1.5 ton Split AC

All as per item No 141 above but DC Swing motor suitable for 2.0 ton Split AC

All as per item No 141 above but indoor cooling coil for split type Air Conditioner capacity 1.5 Ton.

All as per item No 141 above but outdoor condenser coil for split type Air Conditioner capacity 1.5 Ton.

All as per item No 141 above but indoor cooling coil for split type Air Conditioner capacity 2 Ton

All as per item No 141 above but outdoor condenser coil for split type Air Conditioner capacity 2.0 Ton.

All as per item No 141 above but Indoor blower for split type Air Conditioner capacity 1.5 Ton.

All as per item No 141 above but Indoor blower for split type Air Conditioner capacity 2.0 Ton.

All as per item No 141 above but Remote control suitable for Split air conditioner capacity 1.5/2.0 Ton Make- Make- Voltas, Samsung, LG, Lloyd

All as above item No. 141 but refrigerant Gas (R- 134/ R-22/R-32/R-410A) in specific grade and packed seal container.

Supply only out door unit of air cooled split unit Air conditioners electric driven single Phase of capacity of 1.5 TR with minimum 3 star rating EER 3.2 , including 02 Nos iron bracket with anchor fasteners and nut bolts and washers for mounting of outdoor unit complete all as specified and directed. Make- Voltas,Samsung, LG

Supply only out door unit of air cooled split unit Air conditioners electric driven single Phase of capacity of 2.0 TR with minimum 3 star rating EER 3.2 , including 02 Nos iron bracket with anchor fasteners and nut bolts and washers for mounting of outdoor unit complete all as specified and directed. Make- Voltas,Samsung, LG

Supply only indoor wall mounting unit of air cooled split unit Air conditioners electric driven single Phase of capacity of 1.5 TR with minimum 3 star rating EER 3.2 complete all as specified and directed. Make- Voltas, Samsung, LG

Supply only indoor wall mounting unit of air cooled split unit Air conditioners electric driven single Phase of capacity of 2.0 TR with minimum 3 star rating EER 3.2 complete all as specified and directed. Make- Voltas, Samsung, LG

Supply and fixing in repair AC Single Phase Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with Backlit LCD Display, of rating 5-30A (Measures & Displays kWh, kVAh, V,I,kW,PF, Last month history of kWh & MD in kW) with special features like TOD,Tamper logging,Optical Communication Port & Display in Absence of Power with Transparent Hinge Type Box complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth in hard/dense soil for removing / laying of pipes complete all as specified and directed.

Returning filling in and including spreading levelling watering and well ramming in layers not exceeding 25cm with approved earth obtained from excavation complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 40 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Taking up/down MS / GI water tubing and water connections from trenches/ Wall/ Floor including connected fittings / accessories completed all as specified and directed of following size :- (a) 20 mm dia

(b) 25 mm dia

(c) 40 mm dia

(d) 50 mm dia

(e) 65 mm dia

(f) 80 mm dia

(g) 100 mm dia

(h) 150 mm dia

Relaying and refixing the CI//DI/MS /GI pipe after descaling / cleaning complete with the help of water & brush of the following size / bore obtained from taking down above and connect in old / new positions, laid in trenches fixed on wall on floor including of new fittings such as bends, tee, unions, elbows, sockets etc complete all as specified and directed of following size :- (a) 20 mm dia

(b) 25 mm dia

(c) 40 mm dia

(d) 50 mm dia

(e) 65 mm dia

(e) 80 mm dia

(f) 100 mm dia

(g) 150 mm dia

Supply and fix MS ERW Pipe of following size / bore including all fitting such as Tees, elbows, unions, sockets etc. complete laid in trenches or fixed on wall / floor all as specified and directed :- (a) 25mm dia

(b) 40mm dia

(c) 50mm dia

(d) 65mm dia

(e) 80mm dia

(f) 100mm dia

(g) 150mm dia

(h) 200mm dia

Supply and fix galvanised iron tubing medium grade of following size / bore including all fitting such as Tees,bend, elbows, unions, sockets etc. complete all in trenches or fixed on wall / floor all as specified and directed (a) 20mm dia

(c) 40mm dia

(d) 50mm dia

(e) 65 mm dia

(f) 80 mm dia

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 80 mm dia pipe complete all as specified and directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 100 mm dia pipe complete all as specified and directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 150 mm dia pipe complete all as specified and directed.

Material and labour for CI pipes with spigot and socket ends centrifugally cast , Class LA, in any length any type laid in trenches / laid in floors all as specified and directed. (a) 80 mm dia Note:- Run lead joints and flange joints shall be measured and paid separately.

(b) 100 mm dia

(c) 150 mm dia

Material and labour in repair for run lead joints for cast iron pipes for following sizes complete all as specified and directed :- (a) 150 mm dia

(b) 100 mm dia

(c) 80 mm dia

Material and labour for flanged joints for cast iron pipes complete all as specified and directed for following sizes:- (a) 150 mm dia

(b) 100 mm dia

(c) 80 mm dia

Supply and fix in repair Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all specified and directed for Cast iron Pipes up to 150 mm dia

Material and labour for overhauling for pump set by dismantling the pump set opening, cleaning, greasing including replacement of spare parts and re-assembling after repairs including all required metalling, grinding, etc., transportation, reinstalling back to position and testing complete for 12.5 HP all as directed by the Engr-in-Charge. Note : (i) Minor spares such as gland packing, gaskets, nuts, bolts, grease, various rings deemed to be included in the quoted rates. (ii) Major spares such as shafts, bearings, impeller, throat bush, coupling will be measured & paid separately under respective items of Sch 'A'.

All as per item No 213 herein before but of capacity 10.0 HP mono block type - ditto-.

All as per item No 213 herein before but of capacity 7.5 HP mono block type - ditto-.

Supply only for following spare part complete all as specified and directed. Make : Kirloskar Pumps or any other equivalent (a) Impeller with complete assembly 7.5 to 12.5 HP pump.

(b) Pump Shaft.

(c) Shaft sleeve.

(d) Bearing cartridge DE/NDE.

(e) Throat bush (set of two).

(f) Split gland coupling suitable size.

(g) Gland coupling.

(h) Ball bearings suitable for 7.5 to 12.5 HP pump.

Material and labour for dismantling of Electric induction motor from pump set and foundation and transporting to authorised service centre for rewinding the motor with super enamelled copper winding wire of same gauge all as per standard practice including baking varnishing and replacement of bearings and testing and commissioning complete capacity of 12.5 to 15 HP complete all as specified and directed.

All as per item No 224 herein before but of capacity 10.0 HP elect motor of mono block type pump -ditto-.

All as per item No 224 herein before but of capacity 7.5 HP elect motor of mono block type pump -ditto-.

All as per item No 224 herein before but of capacity 2.0/3.0 HP elect motor of mono block type pump - ditto-.

Supply and fix in repair PVC fan suitable for 12.5 /10.0/ 7.5 HP motor complete all as specified and directed

Supply and fix in repair pressure gauge of cap 14/15.0Kgs /sq cm with valve complete all as specified and directed.

Supply and fix in repair cast iron Foot valve of size 100 mm dia bore, ISI marked,flanged bolt complete all as specified and directed.

Supply and fix in repair cast iron sluice valve with iron wheel head flanged both end and ISI make with stainless steel spindle class PN-1.6 complete all as specified and directed of following size :- (a) 200 dia mm

(b) 150 mm dia

(c) 100 mm dia

Supply and fix in repair cast iron non return valve ISI marked flanged both ends of size 150mm dia complete all as specified and directed.

Supply and fix in repair cast iron non return valve ISI marked flanged both ends of size 100mm dia complete all as specified and directed.

Supply and fix in repair cast iron non return valve ISI marked flanged both ends of size 80mm dia complete all as specified and directed.

Supply and fix in repair gunmetal/Bronze gate valve with iron wheel head screwed both end, ISI marked for G.I. pipe complete all as specified and directed of following size :- (a) Bore of pipe 80mm.

(b) Bore of pipe 50mm.

(c) Bore of pipe 40mm.

(d) Bore of pipe 25mm.

(e) Bore of pipe 20mm.

Supply & fix in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed .complete all as specified and directed by Engineer-in-Charge of following sizes :- (a) 25mm dia

(b) 20mm dia

Material and labour for preparation of old steel surface for painting of electric motor of 12.5 / 10.0/ 7.5 HP capacity including connected pumpset and foundation plate installed at pump house No 1 & 2 at Domestic area with two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of steel surfaces of any description over 10cm width or girth of old existing C.I. / MS pipe line mains at Pump house No 1 & 2 by removing the dust and rust with the help of sand paper and applying two coats of synthetic enamel paint on C.I. / MS pipe line complete all as specified and directed by Engineer-in-Charge.

Material and labour for repairs/rectification of leakage in cast iron pipe lead joint by caulking lead wool/ pig lead complete including excavation and earth work for exposing the joints and working space on the site, returning filling in and making good to the existing earth level of the surroundings after repair for the pipes of sizes upto 200 mm dia complete all as specified and directed

Decanting the water from UG Sump completly with the help of submersible pump set and remove sludge manually complete ,clean all algae, fungus and foreign material by means of wire brush, apply one coat of bleaching powder inside the tank including washing with pressure water, cleaning the tank and apply two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS15489:2004, Alkali & fungal resistance, dirt resistance, exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm on walls all as per manufacturer instruction for outside the tank all as specified and directed for the following capacity UG Sump :- Note: (i) Cleaning of tank shall be twice in a year (ii) All cleaning materials, Bleaching powder, paint etc required shall deemed to be included in quoted rate. (a) UG Sump of capacity 0.75 lakh litres

(b) UG Sump of capacity 2.25 lakh litres

(c ) UG Sump of capacity 2.00 lakh litres

(d) OHR of capacity 1.00 lakh litres

(e) Fire static tank of capacity 2.25 lakh litres

Repair of water supply line with mechanical joint, of CI pipe line size 80 mm to 200 mm including taking out the puncture/cracked existing pipe and transport to local workshop, cutting of damaged portion of pipe through welding/ gas welding, making rough surfaces smooth and chamfered by grinding and connection through mechanical joint of adequate size with rubber rings both sides and fastener of required size and shape complete as per site requirement including Mechanincal joint, excavation, returning filling and removal complete all as specified and directed. Note : Testing/commissioning the pipe line on full pressure after complete the job will be carried out and payment will made of this job if found sucess other wise the same will be done again and no extra payment will be made on this account.

Supply and fix Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside complete all as specified and directed.

Supply and fix RRL hose type - A , 63 mm dia 15 metres length with Gun Metal male and female complete all as specified and directed.

Supply and fix Gun metal hydrant valve, type: Single headed including nut, bolts and washers complete all as specified and directed.

Supply and fix Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 20 mm bore nozzle size complete all as specified and directed.

Supply and fix Yard hydrant Post / Stand Post 80 mm Dia GI / MS both flanged type 1.5m Height complete all as specified and directed.

Material and labour for overhauling for pump set by dismantling the pump set opening, cleaning, greasing including replacement of beaing and re-assembling after repairs including all required metalling, grinding, etc., transportation, reinstalling back to position and testing complete for 79 HP Pump complete all as specified and directed.

Meterial and labour for overhauling for jackey pump set by dismantling the pump set opening, cleaning, greasing including replacement of bearing and re-assembling after repairs including all required metaling, grinding, etc., transportation, reinstalling back to position and testing complete for 15 HP including replacement of required accessories complete all as specified and directed by the Engr-in-Charge.

Supply and fixing MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed Make : L&T/Havells/C&S/Legrand/Hager

Supply and fixing soft starter rated operational voltage 415V, 15 KW, 30A, 3 Phase, 50 HZ voltage rap and torque control for both start and stop, two phase controlled, current limit and kick-start, built-in-bypass for energy spacing and easy installation, normal starts, class 10, In-Line, rated control supply voltage, US, 100-240V AC, external keypad rated IP 66, new built-in-modbus-RTU communication for monitoring and control, fieldbus communication with fieldbus plug adaptor and fieldbus plug, analog output for display of motor current, electronic overload, under load and locked rotor protection complete all as specified and directed Make : ABB/ L:&T/BCH/Havells/Schiemens/Schneider/Legrand

Supply and fixing LED pilot lamp 22.5 mm dia suitable to fix panel mounting complete all as specified and directed.

Supply and fixing LED push button red and green for start and stop function of pump set suitable to mount on panel all as specified and directed

Supply and fixing 3 pole power contractor rating 50A, 3 pole, Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, range from 9A-650A AC -3 complete all as specified and directed Modle MNX 50 of Make : L&T or equivalent in Havells/ABB/Schneider/Siemens/Legrand

Supply and fixing front mounting Add-on Aux. Contact block 2 No+2NC, range from 9A-80A, Complete all as specified and directed Modle CS94114 of Make : L&T or equivalent in Havells/ABB Schneider/Siemens/Legrand

Supply install testing and commissioning of LT Panel Board CPRI approved cubical with kiosk type made of 2 mm thick outdoor type with IP 54 grade of protection CRCA sheet, powder coated, with support of 50 mm x 50 mm x 6mm angle iron bottom frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors, control wiring connectors, PVC DIN rail, incoming and outgoing terminals, epoxy connectors and provision for fixing of soft starter panel, MCCB, power contactor and contact block multifunction meter LED phase indicators and push buttons complete along with provision for necessary cable entry/ exit for all incoming and outgoing cables with suitable cable glands etc fixed on suitable PCC foundation complete all specified and directed.

the bhimani group of companies

NANGIA AND CO